erg69

What are people using to hold on their rear lip spoiler? Mine is starting to come un- glued/taped on one side. But everything I have tired to put it back down has failed... 3m contact cement, 3m double sided tape, I even tried super glue.... I see in the service manual there are supposed to be screws holding it on... mine has none. Any advice?

nttstt444

iTrader: (1)

I dont believe there are screws on the sides, just the zip tie style fastners and double sided tape. You may have to double up on the double sided tape. Now, the rear of the lips have 2/3 studs that fasten them to the bumper. Is that what your refering to?

numairh

iTrader: (2)

If its an OEM lip then it needs screws to hold it in. There should be instructions online. If its from ebay usually its only held on by tape

erg69

It should be oem because the window sticker of the car has the a-spec package. That said, it is only held on by tape.....

nttstt444

iTrader: (1)

Thought you were talking about the aspec lower rear lip at first not the trunk lip. The base one has 2 studs and 2 zip tie fasteners and prob some double sided tape on the edges, if you have the type s one its has 5 or 6 studs.