HID with DRL problem
#1
HID with DRL problem
Hello my fellow Acurazines, I have been working on a project for about a little over a month now. Hopefully someone here has already been through this problem and can advise me on how to resolve this issue.
I have 2008 Acura TL, now I had bought a HID conversion kit and replaced the stock halogen bulbs with HID (10,000K). The problem I'm facing is the DRL warning light comming on when it's not detecting the stock halogen bulbs.
Is there any way of running HID lights without the DRL problem?
I have tried wireharness, high capicator, warning cancler, resistor, and now I'm just completely out of ideas.
Any help would be greatly apperiated.
I have 2008 Acura TL, now I had bought a HID conversion kit and replaced the stock halogen bulbs with HID (10,000K). The problem I'm facing is the DRL warning light comming on when it's not detecting the stock halogen bulbs.
Is there any way of running HID lights without the DRL problem?
I have tried wireharness, high capicator, warning cancler, resistor, and now I'm just completely out of ideas.
Any help would be greatly apperiated.
#2
Are you talking about interior lights, or halogen fog lamps? I'm not as knowledgeable about electronics like you are...but aren't your headlamps already HID (Xenon)? I think you're either talking about your fog lamps, aren't you?
Thread
Thread Starter
Forum
Replies
Last Post
SidhuSaaB
3G TL Problems & Fixes
18
05-30-2020 12:40 AM
AmplifiedDetails
3G TL Problems & Fixes
9
09-24-2015 02:55 PM
4drviper
3G TL Audio, Bluetooth, Electronics & Navigation
0
09-23-2015 09:00 PM