blkmz3

So I read the multiple threads on this issue and was ready for the consequences. I did the driver side first and both were messed up. Needed a breaker bar to break them loose which gave me the sign right away. Being a northeastern car I knew it was going to happen. The rotor was never replaced so the oem rotor did go a long way because I am at 120k miles. So now I'm either getting those remanufactured Centric brembos or putting helicoils in.

Project_CLean

iTrader: (2)

Good luck!

I used Time-serts on mine:
https://www.belmetric.com/timesert-t...c-217_218.html

blkmz3

i got custom steel inserts made on the lathe. Cost me $100 at the machine shop for 4 holes.