The UA7 SQUAD Thread
11-30-2011, 04:14 PM
#1681
2014 Jeep SRT
Thanks! At first I didn't know if I was going to like it, but it's growing on me.
11-30-2011, 04:17 PM
#1682
Kinda off topic but just wanna throw it out there (just dont wanna start a new thread) and I know there is a lot of threads/topics that been posted about this, and I still cant come up with a right answer.
Okay so ive researched and read about a lot about UR lightweight stock diameter pulleys.
I currently have one installed, but every time I drive, always jump into conclusion that it is not a good thing for the engine in long run. My left side engine mount half way ripped, and since I installed the pulley, noticed more vibration when idling.
Its a good hp release for $180 but just not sure if its a good thing in long run.
So what you guys think... keep or remove?
Okay so ive researched and read about a lot about UR lightweight stock diameter pulleys.
I currently have one installed, but every time I drive, always jump into conclusion that it is not a good thing for the engine in long run. My left side engine mount half way ripped, and since I installed the pulley, noticed more vibration when idling.
Its a good hp release for $180 but just not sure if its a good thing in long run.
So what you guys think... keep or remove?
11-30-2011, 05:03 PM
#1683
well naturally you would have more vibration while idling right now cause your mount is ripped...and i dont think the pulley would have caused it to rip...its funny you ask this question cause i was just putting one of those on my xmas list ay the moment...lol..i was thinking about going for the smaller one though
+1..
i like it...looks really good in white
+1..
Last edited by Steven Bell; 11-30-2011 at 07:33 PM. Reason: Merged Posts.
11-30-2011, 05:32 PM
#1684
Instructor
The following users liked this post:
07tl-s6spd (12-01-2011)
The following users liked this post:
JL-Type-S (12-01-2011)
[/IMG]
12-01-2011, 07:48 AM
#1693
Burning Brakes
Join Date: Mar 2009
Location: Wasted away again in Margaritaville
Posts: 755
Received 126 Likes
on
103 Posts
Yeah I've heard good things about Shadowspeed too.
Looking good KJ 3G TL I'm jelly of your low mileage.
ebelp, the white pops well
vladkarnafel, I wouldn't trust them and have heard/read arguments on both sides of the fence. But IMO, it can't help the longevity of the engine.
Looking good KJ 3G TL
I'm jelly of your low mileage.ebelp, the white pops well
vladkarnafel, I wouldn't trust them and have heard/read arguments on both sides of the fence. But IMO, it can't help the longevity of the engine.
Last edited by I are LEGEND; 12-01-2011 at 07:51 AM.
12-01-2011, 01:19 PM
#1695
2014 Jeep SRT
Thanks. I'll have to give it a proper photoshoot later on hehe. Word to the wise...don't install stickers in cold weather. When I pulled off the clear backing layer, it left a film of glue on the lettering which is a huge PITA to get off. It was 40 degrees outside when I did it. Should've warmed it up with a heat gun...
Last edited by ebelp; 12-01-2011 at 01:23 PM.
The following users liked this post:
JL-Type-S (12-01-2011)
12-01-2011, 02:48 PM
#1696
^yea stickers and cold weather dont mix...lol
KJ welcome bro...#83 and #84 are pending still...but your more than welcome to #85 if those are taken
and id bet you have the lowest mileage out of everyone in the SQUAD!
KJ welcome bro...#83 and #84 are pending still...but your more than welcome to #85 if those are taken
and id bet you have the lowest mileage out of everyone in the SQUAD!
Last edited by 07tl-s6spd; 12-01-2011 at 02:52 PM.
12-01-2011, 06:40 PM
#1697
Instructor
I just ordered one from ebay vendor "aaa.motor". I did some searching, and they were the only place that had the style I wanted and had WDP as one of their available paint codes. One vendor told me they could not offer WDP because it would be too hard to match, and other vendors don't even list NH603P as an option. We'll see how mine turns out. It was 1/3rd of the price of the Sarona/ATLP, so I can't complain.
Thanks. I'll have to give it a proper photoshoot later on hehe. Word to the wise...don't install stickers in cold weather. When I pulled off the clear backing layer, it left a film of glue on the lettering which is a huge PITA to get off. It was 40 degrees outside when I did it. Should've warmed it up with a heat gun...
Thanks. I'll have to give it a proper photoshoot later on hehe. Word to the wise...don't install stickers in cold weather. When I pulled off the clear backing layer, it left a film of glue on the lettering which is a huge PITA to get off. It was 40 degrees outside when I did it. Should've warmed it up with a heat gun...
12-01-2011, 07:55 PM
#1702
Instructor
Haha. Yea. I work weird hours. I got a pack of LEDS from VLEDS that came yesterday I haven't put in yet. I will take more pics once their in. I got red for the doors.
12-01-2011, 08:24 PM
#1704
Instructor
HAHAHA even for you're domes?? Lol
I did 5k white for my domes and red for the doors. BTW I'm actually trying to find the FAQs thread how remove the domes. Do you know where the thread is?
I did 5k white for my domes and red for the doors. BTW I'm actually trying to find the FAQs thread how remove the domes. Do you know where the thread is?
12-01-2011, 08:29 PM
#1705
2014 Jeep SRT
The following users liked this post:
LIQUID0401 (12-01-2011)
12-01-2011, 08:31 PM
#1706
yea i used really small flat head screwdriver with a little painters tape around it
:edit:the only ones i didnt do red were the vanity bulbs..left those oem...mainly cause i felt like i was going to break the hell out of it trying to get in it..lmao
:edit:the only ones i didnt do red were the vanity bulbs..left those oem...mainly cause i felt like i was going to break the hell out of it trying to get in it..lmao
Last edited by 07tl-s6spd; 12-01-2011 at 08:40 PM.
The following users liked this post:
LIQUID0401 (12-01-2011)
12-01-2011, 08:41 PM
#1707
Burning Brakes
Join Date: Mar 2009
Location: Wasted away again in Margaritaville
Posts: 755
Received 126 Likes
on
103 Posts
Butter knife FTW It's a super easy install, front and back.
https://acurazine.com/forums/3g-tl-2004-2008-93/how-led-mod-pics-3g-garage-g-019-a-562093/
It's a super easy install, front and back.https://acurazine.com/forums/3g-tl-2004-2008-93/how-led-mod-pics-3g-garage-g-019-a-562093/
Last edited by I are LEGEND; 12-01-2011 at 08:44 PM.
The following users liked this post:
LIQUID0401 (12-01-2011)
12-01-2011, 08:47 PM
#1708
Instructor
Butter knife FTW It's a super easy install, front and back.
https://acurazine.com/forums/showthread.php?t=562093
It's a super easy install, front and back.https://acurazine.com/forums/showthread.php?t=562093
Thanks for the link and the advice guys!
12-01-2011, 08:53 PM
#1709
Don't Mess With My Type-S
12-01-2011, 09:52 PM
#1712
2014 Jeep SRT
All red is much better than the mega blue led tiesto club look.
12-02-2011, 08:46 AM
#1713
well map lights are turned on to give light and see... doesnt the red beat the purpose of that? I had hyper white, 12 led board in each, now have warm white 12 led boards in each, like the super brightness, matches well with my led white fender markers/switchbacks and cold cathode plate lights
12-02-2011, 08:59 AM
#1715
2014 Jeep SRT
12-02-2011, 09:53 AM
#1716
Instructor
12-02-2011, 10:39 AM
#1718
Drifting
iTrader: (9)
I'd be interested to see if mine is the lowest mileage too, I bet some others have some nice low mileage ones as well. Although its nice to see people hitting 100K and going strong, makes me know I can enjoy this car for years and years to come!
Now time to read through some more of this thread, I'm sure theres a lot of good info in all these pages!
12-02-2011, 11:31 AM
#1720
2014 Jeep SRT
We love haters.
The following users liked this post:
07tl-s6spd (12-03-2011)