NBPacuraTL

iTrader: (1)

18x10 +32, 18x12 +38. Gonna throw some 15mm spacers in the rear because i'm hitting the strut, so final product will be 18x12 +23. My goal is to do this with slight modifications to quarter panel (I.e. fender roll/pull, no custom fabricating) and natural camber.

Anyways on to pictures.





With a 9ish mm spacer (was using washers), I was ever so slightly hitting the strut. I'll need a 15 mm spacer to make it work. I'm gonna pull the fenders slightly more and wait for tires.

Going to be running 235/40/18's in the front and 265/35/18's in the rear. Time to get herrafrush.

NBPacuraTL

iTrader: (1)

Comparison of the 18x10 and 18x12

princelybug

iTrader: (16)

12"!

05_NBP_TL

iTrader: (1)

Ohhh snap!

NBPacuraTL

iTrader: (1)

Yes sir. You didn't read wrong!

princelybug

iTrader: (16)

Well, I don't think anyone's done a 12" wide wheel, and with a +23 offset!? Definitely crazy.

Mad props if you can do it.

ASASN21

Good luck buddy.

NBPacuraTL

iTrader: (1)

AMUA6

iTrader: (7)

GL

myron

iTrader: (4)

oh this might look good or it might go wrong. car better be slammed for this shit

chinkwapin

iTrader: (1)

WOW 12 inch with that offset!? i dont know how that will EVER fit with natural camber and just pulling fenders.. but good luck, subscribed!

Tay119

iTrader: (2)

subscribed good luck bro

j1n

iTrader: (1)

wheels are not wide enough bro

vipTL

iTrader: (2)

i really want to see where this turns out my 11's +17 need custom fabbing, where is this headed!! -9 camber???

ILLustriousUA6

iTrader: (2)

holy shit... LIKE

ILLustriousUA6

iTrader: (2)

Texas doing it big though

cjTL

iTrader: (2)

Congrats if all that fits and the TL rides the same after.

bigBLACKTL

wowzers... mad props if you get these to fit like the way you said with natural camber and pulled fenders! herraFRUSH FTW

Toddy

iTrader: (5)

Subscribing. Good LUck

anionrings

iTrader: (2)

This Is going to be one crazy Fit....I can kinda imagine seeing ur car in the highway on my way to work in BMT...lol

i live in pa btw...

wrxyboy

iTrader: (2)

like everyone said good luck with fitting those with out body work. It can be done but i think it will be mad poke. I know rodney and I have 11's with very low offsets maybe even negative offsets and custom work had to be done. But i cant wait to see the outcome of this project.

djbonsu

iTrader: (3)

subcribed....im in for this...

AMUA6

iTrader: (7)

Hmmm,
sub'd

rodneyc77

iTrader: (1)

yeah... I think that the OP is being unrealistic, if he thinks that he is going to fit those rear wheels without custom bodywork. He's already experiencing the wheels hitting the rear struts. He's adding spacers to eliviate that issue but then is going to add camber to clear the fenders and in essence is bringing the wheel back closer to the strut.

Good luck...

Acuraluvr

iTrader: (2)

oh. my. lord. good luck dude. that extra inch will be killer. after seeing what viptl needed to do... damn, youre gonna need it. Prove us wrong man!

NBPacuraTL

iTrader: (1)

Thanks to everyone telling me good luck. And rodney, where did I say I was going to add more camber? If for some reason I can't do it, then custom fender work will be required, but I'm not gonna add more camber.

I'm stubborn. I'm gonna try to prove you guys wrong!

Crestwood1001

Rodney knows what he is talking about.

NBPacuraTL

iTrader: (1)

Of course he knows what he's talking about and I'm comprehending every bit of it. 15mm spacer will clear the strut. I'm not gonna add camber. I'm hoping to compensate for the spacer by pulling my fenders a tad more.

I hoping to buy my spacers and tires either this week or next week, so I'll keep you guys posted.

vipTL

iTrader: (2)

FYI..... so you can estimate from there, when i had STOCK fenders on my 19x11+17 on 245/13/19 tires, and i had -7 degrees of camber in the rear. sooooooooo 12+23 yea..... natural camber yea that aint happening

edit - unelss you drive at 4x4 height

NBPacuraTL

iTrader: (1)

From test fitting in my garage, it looks very plausible. Hopefully with my tires, I'll get the stretch that I want. Thanks for you input sir . I'll keep it in mind.

245/13/19?

rodneyc77

iTrader: (1)

I know you mentioned "natural camber" but in my head I tried to makes sense of it and figured you would "ADD natural camber"... my fault...

I'll keep an eye on this thread... dope wheels...

NBPacuraTL

iTrader: (1)

Thank you sir! SSR Viennas. Your car, vipTL's and Decafe's car were my inspirations for this project.

jvallido

interesting!

vipTL

iTrader: (2)

gluck with project i hope it turns out good

runnin9z

Gonna look great. You said you put 9mm of washers on there and it hit so u were going to get 15mm, Im pretty sure they 12mm spacers if you are trying to find something in the middle

NBPacuraTL

iTrader: (1)

It's ok. I rather be safe than sorry and run a 15mm spacer. I never heard of 12mm spacers.

rastaracer

oh no he didnt ! i cant wait to see the final pics. i hope everything works out ok.

d-j-m

This is going to be a beast when done! Wheel choice and size is sick.

Most people on staggered/rolled fenders are on 19s, you'll be able to pull this off I just don't know if it'll be as easy as you predict.

vipTL

iTrader: (2)

hahaha did really type that LOL 245/35/19

Vtec_PL

good luck!!!! im excited to see this!!