My brother and I have contracted a disease: Spoonitis
#1
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
My brother and I have contracted a disease: Spoonitis
My brother has been diagnosed with Spoonitis. It's an extremely rare disease that doesn't have a cure. The culprit is the land of the rising sun. The carrier is by boat via the Pacific. The distribution point for the north american continent is located in California. I've contracted the disease, and it's visible with my work in the TL. Here is the result of this ongoing disease...!!
Info on the S2000 build:
Currently the mod list is as follows...
-Spoon taiyku front bumper
-Spoon rear bumper
-Spoon mooncraft hardtop
-Spoon titanium shift knob
-Tein flex coilovers
-17x9 Enkei RPF1
-Greddy EvoII exhaust
-Fujita CAI
Soon to be installed:
-Spoon radiator hoses
-Koyorad radiator
-Spoon radiator cap
-Spoon 4pot calipers
-Spoon rotors
-Spoon clutch
-Spoon flywheel
-Spoon rear diffuser
-Spoon front fenders
-Spoon hood
-Spoon rear overfenders
-Spoon snorkel air intake
-Spoon air box
-ASM exhaust manifold
-Hondata reflash
...that's all for now folks! Thanks for looking.
![](http://img352.imageshack.us/img352/5069/img1938ji6.jpg)
![](http://img352.imageshack.us/img352/6554/img1948oc3.jpg)
![](http://img352.imageshack.us/img352/6530/img1957ua9.jpg)
![](http://img508.imageshack.us/img508/2468/img1965ul8.jpg)
![](http://img100.imageshack.us/img100/4825/img1969hr0.jpg)
![](http://img352.imageshack.us/img352/2546/img1974eg6.jpg)
Info on the S2000 build:
Currently the mod list is as follows...
-Spoon taiyku front bumper
-Spoon rear bumper
-Spoon mooncraft hardtop
-Spoon titanium shift knob
-Tein flex coilovers
-17x9 Enkei RPF1
-Greddy EvoII exhaust
-Fujita CAI
Soon to be installed:
-Spoon radiator hoses
-Koyorad radiator
-Spoon radiator cap
-Spoon 4pot calipers
-Spoon rotors
-Spoon clutch
-Spoon flywheel
-Spoon rear diffuser
-Spoon front fenders
-Spoon hood
-Spoon rear overfenders
-Spoon snorkel air intake
-Spoon air box
-ASM exhaust manifold
-Hondata reflash
...that's all for now folks! Thanks for looking.
Trending Topics
#8
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
so sick man, i cant wait to see the other mods!!
damn eric! find me some 2G spoon/arc parts, yo!
not my cup of tea on the s2000, but good work otherwise.
![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
is it contagious? .... lol
wouldnt the hard-top add unwanted weight to the car?? the back kinda looks like a chrysler crossfire to me... i am definitely DIGGING that front bumper with those cool ass fogs.. never seen that before!
wouldnt the hard-top add unwanted weight to the car?? the back kinda looks like a chrysler crossfire to me... i am definitely DIGGING that front bumper with those cool ass fogs.. never seen that before!
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
oh and by the way... im sorry, but do you or your brother work at that honda dealer?? you STAY taking photos in front of that same building lol
#9
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Originally Posted by MugenR
Damn man! you and your brother! a family of sick cars. good work! ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Thanks Andrew! ...we try!
#19
FizzyStatus!
iTrader: (6)
You know, it's funny, whenever I think "Oh, he's done, there isn't possibly anything else he can actually do to his TL", you post new pictures up with something baller done and make me drool some more
The Varis Air Intake Duct looks hellllla good with that bumper though, for real!
As for the S2k...I'm at a loss of words...
![Drool](https://acurazine.com/forums/images/smilies/drool.gif)
As for the S2k...I'm at a loss of words...
![Drool](https://acurazine.com/forums/images/smilies/drool.gif)
#25
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
SON, when? I had no idea you really did the duct, DAYUM, THAT SHIT LOOOOOOKS PIMMMMMPEED
and ur bro's s2k yeah its nice too![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
So do you guys park those spoons on a bowl?
and ur bro's s2k yeah its nice too
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
So do you guys park those spoons on a bowl?
#28
A-spec steering wheel ftw
Join Date: Jan 2007
Location: Roslyn Heights, New York
Age: 38
Posts: 1,371
Likes: 0
Received 5 Likes
on
5 Posts
lol what do you guys do to be able to afford all this T.T
i'm digging the Spoon rear, is there anyway to hike up the exhaust and balance the bottom with a custom CF diffuser? kinda like the hardcore GT2/N-GT or the GT300 cars...dunno if that would end up being just dead weight or if it would benefit later on. How hardcore is your bro gonna go with the tuning? i mean so far it's been looks and some basic bolt ons. how hardcore you gonna go on the AP1?
(can't wait to see the end results) 9000 rpm or is it 8200 rpm in the states?
either way it looks great!
i'm digging the Spoon rear, is there anyway to hike up the exhaust and balance the bottom with a custom CF diffuser? kinda like the hardcore GT2/N-GT or the GT300 cars...dunno if that would end up being just dead weight or if it would benefit later on. How hardcore is your bro gonna go with the tuning? i mean so far it's been looks and some basic bolt ons. how hardcore you gonna go on the AP1?
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
either way it looks great!
#29
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
front end looks kinda busy, but the rears of both cars are seeex.
lovin both rims, too.
lovin both rims, too.
#35
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
I just saw some other of your pics[only the front/part of the top]. I just realized you have the color scheme I was planning on doing...
White TL, black hood-roof-and-trunk.. not sure if I should get the decklid spoiler in black .. or white as you did.
Also not sure if I should paint the entire hood black, where as you had it done till the curve begins.
White TL, black hood-roof-and-trunk.. not sure if I should get the decklid spoiler in black .. or white as you did.
Also not sure if I should paint the entire hood black, where as you had it done till the curve begins.
#36
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Thanks to everyone for the comments!
Thanks! What you're seeing is the ring and solenoid that has yet to be connected to the bottle. It's the DEI cryogenics intercooler sprayer kit.
Ballin... it's hard for me to stop! It's like a hobby i guess. The duct is made by titec i think.
The front is the versus motorsports bumper, sides are a-spec, and the rear is the type S add on. Visit www.versusmotorsports.com to find the bumper. It's around $400 something shipped.
The credit for the duct idea all goes to you my man!
...he'll be happy to know someone digs the rear bumper. A lot of people are unsure of the styling on the rear, but if you ever get the chance to view it from the rear while driving behind the car it's amazing...you can see the coilovers and all the components under the car...pretty neat looking IMO. He will eventually have the spoon diffuser on the car, so it'll look even better once it arrives. As for motorwork, i'm not sure which route he'll go with it. Probably stay NA for a while.
It'll look good if you decide to go with a custom paint scheme. Look into the custom CSL style CF decklids being produced by ua6spec.
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
Both cars are sick bro. Are you running the cooling system that shoots out mist of cold water into your intercooler? ( Forgot the name of it ).
You know, it's funny, whenever I think "Oh, he's done, there isn't possibly anything else he can actually do to his TL", you post new pictures up with something baller done and make me drool some more The Varis Air Intake Duct looks hellllla good with that bumper though, for real!
that is a nice kit on the tl where can i purchase?
SON, when? I had no idea you really did the duct, DAYUM, THAT SHIT LOOOOOOKS PIMMMMMPEED
i'm digging the Spoon rear, is there anyway to hike up the exhaust and balance the bottom with a custom CF diffuser? kinda like the hardcore GT2/N-GT or the GT300 cars...dunno if that would end up being just dead weight or if it would benefit later on. How hardcore is your bro gonna go with the tuning? i mean so far it's been looks and some basic bolt ons. how hardcore you gonna go on the AP1? (can't wait to see the end results) 9000 rpm or is it 8200 rpm in the states?
I just saw some other of your pics[only the front/part of the top]. I just realized you have the color scheme I was planning on doing...
White TL, black hood-roof-and-trunk.. not sure if I should get the decklid spoiler in black .. or white as you did.
Also not sure if I should paint the entire hood black, where as you had it done till the curve begins.
White TL, black hood-roof-and-trunk.. not sure if I should get the decklid spoiler in black .. or white as you did.
Also not sure if I should paint the entire hood black, where as you had it done till the curve begins.
#38
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Here's my new little buddy!... He's ridden in the TL a few times, the supercharger whine scares the little guy. haha.
![](http://img255.imageshack.us/img255/217/img1988ow2.jpg)
#39
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Originally Posted by AirJordan23922
not feelin the s2k, but the TL is hottttt
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#40
I was thinking about doing that and paint it to match my ASM. But I dont like the angle. Maybe if it was an oval or circle... I dunno. It just looks out of place to me still, and I've whored your pics at least a 100 times now while debating to do mine.
With my intake mod, it'll be a freaking true ram air.
With my intake mod, it'll be a freaking true ram air.