MrKingston's Fully Bolted/Tuned/AccuAir Bagged '08 CBP TL-S Progress Thread 12/29/15
#1
MrKingston's Fully Bolted/Tuned/AccuAir Bagged '08 CBP TL-S Progress Thread 12/29/15
Hi everyone. I'm new here on the forums and also a new owner of a CBP 2008 Acura TL Type S. Bought it in early October in Miami and brought it down to the US Virgin Islands on the island of St. Croix. I got it at 36,XXX miles in very good condition. Been browsing the forums for a while to get some ideas but haven't done much as yet...
Here's some pics from my iPhone 5 at the dealer:
Now she's on the island all washed up and now my daily driver:
Current Mods:
White LED Interior Installed
Drill Slotted Rotors Installed
ScanGuage II
WeatherTech Digital Fit Floor Liners
OEM Acura TL Trunk All Weather Mat
Near Future Mods:
A-Spec Lip Kit
Custom Headlights/Tailights from AckTL05 (Currently looking into getting these)
TYPE-S with clear diffuser installed, blacked out with ZKWs and/or with CF Sides
OEM Visors
ALTP V1 Roof Spoiler
Sarona Lip Spoiler (I like how this hangs over more than the stock one)
HID Fogs
Wheels I haven't decided as yet but definitely in Hyper Silver, Gunmetal, or Black.
Any other tips or ideas are welcomed. Thanks for looking.
Here's some pics from my iPhone 5 at the dealer:
Now she's on the island all washed up and now my daily driver:
Current Mods:
White LED Interior Installed
Drill Slotted Rotors Installed
ScanGuage II
WeatherTech Digital Fit Floor Liners
OEM Acura TL Trunk All Weather Mat
Near Future Mods:
A-Spec Lip Kit
Custom Headlights/Tailights from AckTL05 (Currently looking into getting these)
TYPE-S with clear diffuser installed, blacked out with ZKWs and/or with CF Sides
OEM Visors
ALTP V1 Roof Spoiler
Sarona Lip Spoiler (I like how this hangs over more than the stock one)
HID Fogs
Wheels I haven't decided as yet but definitely in Hyper Silver, Gunmetal, or Black.
Any other tips or ideas are welcomed. Thanks for looking.
Last edited by Steven Bell; 11-19-2013 at 08:13 PM. Reason: Merged Posts
The following users liked this post:
deematic (11-28-2014)
#3
Moderator
iTrader: (3)
Looking good so far, congrats! A drop would greatly help
It appears that you have an aftermarket 07-08 Base front bumper. Keep that in mind when/if you order the A-Spec kit.
It appears that you have an aftermarket 07-08 Base front bumper. Keep that in mind when/if you order the A-Spec kit.
The following users liked this post:
mrkingstonvi (11-19-2013)
#4
And definitely a drop, doing some more homework on what I should get. Any suggestions?
Thanks! Wow I didn't even realize it is. I know the bumper was aftermarket considering the Acura is missing. But I didn't notice it might be a base front bumper.
It appears that you have an aftermarket 07-08 Base front bumper. Keep that in mind when/if you order the A-Spec kit.
#6
I read these two threads:
https://acurazine.com/forums/3g-tl-2004-2008-93/unofficial-spec-difference-thread-853331/
https://acurazine.com/forums/3g-tl-2004-2008-93/how-front-type-s-aspec-base-07-08-bumper-835689/
and basically gave me all the DIY info I would need when the time comes for the A Spec install.
As quoted "The Type-S A-Spec front and rear pieces can fit on Base TL bumpers. Modifications will have to be made to do so since the bumpers have different overall shapes and since the Type-S rear bumper has wider exhaust outlets."
I just love these forums…
Well I ordered one of these:
http://www.ebay.com/itm/281206659118...84.m1497.l2649
I believe these are the aftermarket replica versions…
https://acurazine.com/forums/3g-tl-2004-2008-93/unofficial-spec-difference-thread-853331/
https://acurazine.com/forums/3g-tl-2004-2008-93/how-front-type-s-aspec-base-07-08-bumper-835689/
and basically gave me all the DIY info I would need when the time comes for the A Spec install.
As quoted "The Type-S A-Spec front and rear pieces can fit on Base TL bumpers. Modifications will have to be made to do so since the bumpers have different overall shapes and since the Type-S rear bumper has wider exhaust outlets."
I just love these forums…
http://www.ebay.com/itm/281206659118...84.m1497.l2649
I believe these are the aftermarket replica versions…
Last edited by Steven Bell; 11-19-2013 at 08:13 PM. Reason: Merged Posts
#7
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Very nice! Congrats-be sure to join our Type S Social Group from the link below my signature.
Also, you have 5 minutes once you post a thread to either edit or add to it. That way, you won't be double posting.
Also, you have 5 minutes once you post a thread to either edit or add to it. That way, you won't be double posting.
Trending Topics
#9
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Looks great.
The following users liked this post:
mrkingstonvi (11-21-2013)
#10
I like turtles
Car looks great
Beware- I bought my car with an aftermarket base front bumper also (didnt even realize it), but....the a-spec front lip fit horrible and had pretty big gaps on both sides. I've since replaced the bumper with the correct OEM type-s version from acura. That drove me nuts
Beware- I bought my car with an aftermarket base front bumper also (didnt even realize it), but....the a-spec front lip fit horrible and had pretty big gaps on both sides. I've since replaced the bumper with the correct OEM type-s version from acura. That drove me nuts
The following users liked this post:
mrkingstonvi (11-21-2013)
#11
Car looks great
Beware- I bought my car with an aftermarket base front bumper also (didnt even realize it), but....the a-spec front lip fit horrible and had pretty big gaps on both sides. I've since replaced the bumper with the correct OEM type-s version from acura. That drove me nuts
Beware- I bought my car with an aftermarket base front bumper also (didnt even realize it), but....the a-spec front lip fit horrible and had pretty big gaps on both sides. I've since replaced the bumper with the correct OEM type-s version from acura. That drove me nuts
#13
Small Update
Yes they are. I also discovered that the trunk lip spoiler was also a base model trunk lip spoiler. But I bought one from azeezp13 on the Black Market and it should be here anytime now.
Yeah they are wicked. I already contacted AckTL05 and I should be receiving them within a week or so.
Yeah I already joined. Thanks.
A small quick update, I bought & received the OEM Visors from Kaiii on the BM. They are installed but I haven't got to take any pics yet cuz it keeps raining & I wanted to take pics when it's clean. I received the Replica ALTP V1 Roof Spoiler (Or the eBay Duraflex) today, so over the holidays after I receive the OEM Type S Trunk Spoiler (which supposed to arrive today ) I will have them painted and install but here is a teaser of the roof spoiler.
Also I want to paint my calipers like the Brembo Gold ones. I googled for some answers and came up with Inca Pearl Clearcoat Y-61P which is the closet match. Next month I plan to buy 4 new tires so I will begin my research on some good ones. We don't have snow down here in the islands so all season tires or even summer would be fine. Any suggestions tho? (Ride quality/smoothness, durability, good pricing, etc) Any advice or suggestions would be appreciated and thanks for looking once again. I love AcuraZine!
Yeah they are wicked. I already contacted AckTL05 and I should be receiving them within a week or so.
A small quick update, I bought & received the OEM Visors from Kaiii on the BM. They are installed but I haven't got to take any pics yet cuz it keeps raining & I wanted to take pics when it's clean. I received the Replica ALTP V1 Roof Spoiler (Or the eBay Duraflex) today, so over the holidays after I receive the OEM Type S Trunk Spoiler (which supposed to arrive today ) I will have them painted and install but here is a teaser of the roof spoiler.
Also I want to paint my calipers like the Brembo Gold ones. I googled for some answers and came up with Inca Pearl Clearcoat Y-61P which is the closet match. Next month I plan to buy 4 new tires so I will begin my research on some good ones. We don't have snow down here in the islands so all season tires or even summer would be fine. Any suggestions tho? (Ride quality/smoothness, durability, good pricing, etc) Any advice or suggestions would be appreciated and thanks for looking once again. I love AcuraZine!
The following users liked this post:
RuizDC5 (03-03-2016)
The following users liked this post:
mrkingstonvi (12-24-2013)
#15
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Have the roof spoiler done in Carbon Fiber.
#16
I though about that today & I might actually look into that. Although I never seen anyone or know anyone that does that on island. Usually they would just order whatever they want already in CF. How hard is it to wrap it in CF if I order a roll from say AckTL05?
The following users liked this post:
mrkingstonvi (01-09-2014)
#18
Wow Amaze Such TL-S
iTrader: (1)
Join Date: Jul 2013
Location: Fremont, California
Age: 36
Posts: 578
Received 129 Likes
on
112 Posts
i ordered a roll of CF vinyl through bruce (though i have yet to put it on). looks like it's really good quality though.
btw the right side of your roof spoiler looks like it's not adhered too well? Looks like the front right corner's sticking out a bit
btw the right side of your roof spoiler looks like it's not adhered too well? Looks like the front right corner's sticking out a bit
#19
The roof spoiler isn't installed yet. I only rested it on to take a few pics to get an idea of how it looks, fitment, etc. I'm still waiting on the type s trunk lid spoiler so I can have both painted CBP and installed at the same time. But as a future mod I will definitely get a roll of CF Vinyl and do some wrapping.
The following users liked this post:
mrkingstonvi (12-25-2013)
#21
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
It's not too difficult to apply the carbon fiber. Just have a heat gun or a hair dryer handy.
The following users liked this post:
mrkingstonvi (01-09-2014)
#22
Thank you. I was gonna get one in WDP but the seller kept BS me. So I got this CBP and now it grows on me.
Cool. I'll keep that in mind.
Thanks everyone for the comments, advice, tips, etc. I can't wait for my other modifications to arrive. Will post up when everything is installed.
Cool. I'll keep that in mind.
Thanks everyone for the comments, advice, tips, etc. I can't wait for my other modifications to arrive. Will post up when everything is installed.
Last edited by mrkingstonvi; 12-25-2013 at 07:22 AM. Reason: Typo
#23
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Maybe try it on a small section....honesty, the Heat Gun/Hair Dryer is a must!
The following users liked this post:
mrkingstonvi (12-26-2013)
#24
Ok guys here's another tiny update. I received the OEM Type S Trunklid Spoiler (Finalllllyyyyyy!!!) yesterday and it is being painted as I type this. As for the roof spoiler, it has been painted but still awaiting install. I could have gotten it installed today during my lunch break but I figured I'd install both at the same time. But I decided to take a few sneak peek pics to show how great it matches. So dive in and take a look below:
It's not sitting flush because there are two screws on both sides which was required to hang the roof spoiler while being painted. Next it will have to sand & buff. So I can't wait until both are done and installed. Will update in a few days hopefully before the end of the week...
#25
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Looks good-no one in the Virgin Islands will have that!
The following users liked this post:
mrkingstonvi (01-07-2014)
#27
Roof Spoiler Installed!!!
Trunk spoiler up next but I need some new tabs and it was too late to get some because parts/hardware stores were already closed for the night.
Your right. There is only one WDP TL-S here on island that has a roof spoiler. I believe one of those bmwoemshop type one from eBay.
Thank you!
I also never took a pic with the ScanGauge 2 installed…
Last edited by mrkingstonvi; 01-09-2014 at 09:06 AM.
#28
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
That looks great!
......Virgin Islands-I miss it.
......Virgin Islands-I miss it.
#29
More Goodies
Oh you been to the VI before? Which island & how did you enjoy your stay?
Hey guys I'm back again, seems like this will be a fun weekend for me. Look at what came in today. Thanks Bruce!!
So as of now here are my current list of mods:
ScanGuage 2
D/S Rotors
5K Interior LEDs
WeatherTech Digital Fit Floor Liners
OEM Acura TL Trunk All Weather Mat
Custom CDM Tail lights from Bruce AckTL05
MORIMOTO 3FIVE D2S HID Bulbs 5K
Duraflex Roof Spoiler (ALTP V1 Replica)
Next on my mods list:
A-Spec Lip Kit
Custom Headlights from Bruce (ZKW-R, CF Sides)
CF Interior Kit inspired by Pitorican
I'm still debating on a drop because I scrape to enter my driveway, and when I come to work. Then the roads here on the island are not the best, dodging pot holes left & right so it will be a long while before I decide on coilovers & rims. I will be back with pics on the results over the weekend.
Hey guys I'm back again, seems like this will be a fun weekend for me. Look at what came in today. Thanks Bruce!!
So as of now here are my current list of mods:
ScanGuage 2
D/S Rotors
5K Interior LEDs
WeatherTech Digital Fit Floor Liners
OEM Acura TL Trunk All Weather Mat
Custom CDM Tail lights from Bruce AckTL05
MORIMOTO 3FIVE D2S HID Bulbs 5K
Duraflex Roof Spoiler (ALTP V1 Replica)
Next on my mods list:
A-Spec Lip Kit
Custom Headlights from Bruce (ZKW-R, CF Sides)
CF Interior Kit inspired by Pitorican
I'm still debating on a drop because I scrape to enter my driveway, and when I come to work. Then the roads here on the island are not the best, dodging pot holes left & right so it will be a long while before I decide on coilovers & rims. I will be back with pics on the results over the weekend.
The following users liked this post:
pitorican (01-26-2014)
#30
Hey Mods I forgot to add these details to my last post, can you please edit and add these please. Thanks
To add in current list of mods:
Kinivo BTC450 Bluetooth
OEM Window Visors
8K HID Fogs
To add to next on my mods list:
Changing HID Fogs from 8K to 5K
VLeds V3 Switchbacks
VLeds 5K DRL
To add in current list of mods:
Kinivo BTC450 Bluetooth
OEM Window Visors
8K HID Fogs
To add to next on my mods list:
Changing HID Fogs from 8K to 5K
VLeds V3 Switchbacks
VLeds 5K DRL
#32
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
I went to St. Thomas and St. John's Island on a cruise about 100 years ago.....
#33
Tails & VLeds 5K DRL Installed
Ok guys here's another update. The tail lights from Bruce aka AckTL05 came out waaaay better than I imagined! In the shadows it looks completely smoked/stealth like but in the light you can see it better. I absolutely love them and I can't stop watching from the back lol. Also, the same day I decided to wash the car, the VLeds 5K DRL came in. The 5K Switchbacks are backordered, so I did a quick install instead of waiting for everything to come in. But here are some pics for your enjoyment & some randoms:
The following users liked this post:
mrkingstonvi (02-04-2014)
#36
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Awesome progress so far! Congrats on finding a low mileage CBP Type-S!
The following users liked this post:
mrkingstonvi (02-04-2014)
#37
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Good looking' tails!
I would like to go back to the Virgin Islands now-we got about a 12 inches of snow today.
I would like to go back to the Virgin Islands now-we got about a 12 inches of snow today.
The following users liked this post:
mrkingstonvi (02-10-2014)
The following users liked this post:
mrkingstonvi (02-05-2014)
#39
Small Update / Random shots (56K Warning)
Thank you!
Yeah Tails are definitely wicked. I can't stop thanking AckTL05!
Thank you! I'm thankful for this forum and other members for the ideas, suggestions, & inspirations. My VLeds 5K V3 Tritons & 5K Foglight bulbs are on the way, I'm ordering my A-Spec Lip Kit this week & I also will be ordering Akata 15mm & 20mm Wheel Spacers. I was thinking about getting the USR Front & Rear Switchback side markers, any cons? Fitment issues on a Type S?
Here's some more random shots I took yesterday when I went for a drive:
Here's some more random shots I took yesterday when I went for a drive:
Last edited by mrkingstonvi; 02-10-2014 at 06:55 AM.
#40
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Love all those new shots....many are Avatar worthy.
The following users liked this post:
mrkingstonvi (02-12-2014)