EddieOnAZ's AM Progress Thread
The following users liked this post:
EddieOnAZ (03-20-2015)
#44
GP16 sold them to me for an incredible price. They were terribly damaged, almost beyond repair. The warped wheel was so bad the shop told me there was a 50/50 chance of being repairable or straight up splitting in half when they would try to fix them so I kinda got lucky.
I've never been a fan of most aftermarket wheels because they often look over the top (imo) although some simpler ones are often really sweet looking too.
It cost me 600$ but that's including straightening out 3 wheels. They don't actually powdercoat them. The primer is powdercoated on but then the color and clear are just sprayed over it, that's what they told me their process was. The finish is perfect so powdercoated or not I'm happy
Yeah thanks again for that. I needed another set of wheels urgently since I was paying 70$ twice a yerar to have the tires mounted and everything
I've never been a fan of most aftermarket wheels because they often look over the top (imo) although some simpler ones are often really sweet looking too.
It cost me 600$ but that's including straightening out 3 wheels. They don't actually powdercoat them. The primer is powdercoated on but then the color and clear are just sprayed over it, that's what they told me their process was. The finish is perfect so powdercoated or not I'm happy
Yeah thanks again for that. I needed another set of wheels urgently since I was paying 70$ twice a yerar to have the tires mounted and everything
There's def no waffles around MTL sensibly priced.
Also that $70 a year is kinda expensive, but I guess those times are over now. :P
#45
#46
If you want and are in the MTL area I can give you the contact info for the shop, it's really big and it was recommended to me by my boss who knows his stuff. After dealing with them I'd definitely recommend them too. Only negative feedback I would give though is they don't give out their color code (I wanted to paint my center caps myself). I'm gonna try and pry a bit because if I ever need touch ups I don't wanna have to pay out the ass for them
The following users liked this post:
Oh Sickest TL (03-20-2015)
#48
845 chemin du second ruisseau, Calixa Lavallee
Accueil - Le spécialiste de la réparation et du recyclage de roues en alliage | P. Jacques
It's about 40 minutes from Montreal give or take 10 depending where you are.
#49
I'm actually in the province of New brunswick so I prob wouldn't be making the trip for that but thank you for the heads up on that bruh!
shop Im going to is reputable and would def give me the code.. I think I'm going to go the powder coat route though. I don't know what I'm going to do about my centre caps tho, you can't powder coat plastic LOL
your wheels look awesome tho, looks like they did a sweet job there... and Im sure you could find something close to match the caps??
forgive me if I missed something but is your car at stock height??
shop Im going to is reputable and would def give me the code.. I think I'm going to go the powder coat route though. I don't know what I'm going to do about my centre caps tho, you can't powder coat plastic LOL
your wheels look awesome tho, looks like they did a sweet job there... and Im sure you could find something close to match the caps??
forgive me if I missed something but is your car at stock height??
Last edited by Oh Sickest TL; 03-20-2015 at 09:58 PM.
#50
I'm actually in the province of New brunswick so I prob wouldn't be making the trip for that but thank you for the heads up on that bruh!
shop Im going to is reputable and would def give me the code.. I think I'm going to go the powder coat route though. I don't know what I'm going to do about my centre caps tho, you can't powder coat plastic LOL
your wheels look awesome tho, looks like they did a sweet job there... and Im sure you could find something close to match the caps??
forgive me if I missed something but is your car at stock height??
shop Im going to is reputable and would def give me the code.. I think I'm going to go the powder coat route though. I don't know what I'm going to do about my centre caps tho, you can't powder coat plastic LOL
your wheels look awesome tho, looks like they did a sweet job there... and Im sure you could find something close to match the caps??
forgive me if I missed something but is your car at stock height??
I am at stock height. I have a-spec springs in my garage waiting to be installed. I don't think I'd go lower than that since I already have a little trouble in a couple of places at stock height on Montreal streets..
#52
Yeah the price isn't bad but still. I just got them and while they look good I'm a little disappointed that the acura logo isn't black anymore, I thought they'd leave it black.. Good paint job though but it's not a hard job in the first place.
#53
Exterior detailing took place today
The car was washed, clayed, polished and sealed. The whole job took about 4-5 hours.
I used some 5$ ebay clay, meguiar's m205 with white pads and Klasse sealant.
We also gave a good wash to my father's car, a complete detailing will be done soon.
Ohh and my type-s wheels were refinished and put on about a month ago too!! They're a little darker than stock, nice color imo.
Sadly, one of them already has a small chip on it, I'll have to figure out what to do about it soon.
The car was washed, clayed, polished and sealed. The whole job took about 4-5 hours.
I used some 5$ ebay clay, meguiar's m205 with white pads and Klasse sealant.
We also gave a good wash to my father's car, a complete detailing will be done soon.
Ohh and my type-s wheels were refinished and put on about a month ago too!! They're a little darker than stock, nice color imo.
Sadly, one of them already has a small chip on it, I'll have to figure out what to do about it soon.
#55
I finished around 6h30 pm and it was already somewhat cloudy to begin with. I'll try and get sunshine pics on Friday. I barely did any paint correction, only polished the whole car and used m105 once or twice.
#57
Installed my LED DRLs yesterday. I broke the last pair of bulb that I bought while trying to install them. I ended up buying some Morimoto XB led from TRS. They're bright as hell, really happy with the results. I don't have pictures in direct sunlight but they're definitely bright enough to be easily visible under intense sun.
The following users liked this post:
EddieOnAZ (06-30-2015)
The following users liked this post:
EddieOnAZ (06-30-2015)
#60
Thanks Mr. Bell! After struggling with cheap ebay crap I didn't have a choice but to get those. Worth it IMO.
Yeah but it's still not where I want it to be. I have to fix my inspires, they're not set up the way I want them too. Also, I won't be able to drop it this summer I think. Between fixing the fogs, painting and installing the a-spec sides and rear and fixing my calipers, there won't be time for a drop
Have you decided on a date for your trip to MTL?
Have you decided on a date for your trip to MTL?
#62
#63
You better have a beer with me GP16 or ima feel left out.
Looking good Eddie, nicer looking DRL is something I have to tackle at some point. I don't like the yellow but then again I don't want to blind incoming traffic.
Looking good Eddie, nicer looking DRL is something I have to tackle at some point. I don't like the yellow but then again I don't want to blind incoming traffic.
The following users liked this post:
EddieOnAZ (06-30-2015)
#68
I also didn't realize we had something going on in MTL. But yeah it'd be nice to meet up with you guys sometime soon. Maybe instagram has more TL people from Canada but here on AZine it gets pretty lonely
The following 5 users liked this post by guitarplayer16:
CLtotheTL32 (07-17-2015),
EddieOnAZ (07-17-2015),
Oh Sickest TL (07-17-2015),
polobunny (07-17-2015),
rockstar143 (12-04-2015)
#70
#71
#72
I will meet sometime hopefully, wouldn't be till next summer though LOL... my fresh paint can't handle that kind of highway abuse right now, I wont be doing any long treks until I get that 3m clear bra put on lol
The following users liked this post:
EddieOnAZ (07-23-2015)
#75
#77
Yeah.. The bumper didn't match the rest of the car anyway. The clear was starting to fail where it meets the trunk too. I just can't decide if I want to paint the bumper and the lip separately or once they're assembled. Seems like a waste of paint to do them separately but I think it might look better if I paint before assembly.
#79