DigitalEmpire22's KBP TL-S Progress Thread
#121
GODZILLA & 3G TL
Looking forward to the wheels Chris! I have a feeling they're going to be sick. You definitely need to drop her a little after you put 'em on. And do that pulley too! I definitely look at the ride when driving by windows...or a clean dark-colored car LOL! Gotta see it moving...especially after the Endless BBK. I've still gotta figure out what to do with that Ron Jon certificate I won at the National Meet. Thinking about maybe getting the Legends in Graphite Machined, we'll see. In for pics of the new setup!
#122
Mile High
Thread Starter
yea, love those wheels, i normally don't get to see the wheels when the car is moving, so whenever i drive by places with windows, i look at the car to see the wheels spinning. the other day when i was at Acura picking up my car, i had to wait for them to drive the car up, when i saw it, i was like damn, lol
nice job on making the Rev wheels unique, can't wait to see them in person
i could of swore it was you, cause it was a KBP Type S and had the same similar wheels as you. if it wasn't you, then you got a twin somewhere in A-town
nice job on making the Rev wheels unique, can't wait to see them in person
i could of swore it was you, cause it was a KBP Type S and had the same similar wheels as you. if it wasn't you, then you got a twin somewhere in A-town
A Twin in A-TOwn?!? OH NOOOOS!
Glad I got new wheels than
Looking forward to the wheels Chris! I have a feeling they're going to be sick. You definitely need to drop her a little after you put 'em on. And do that pulley too! I definitely look at the ride when driving by windows...or a clean dark-colored car LOL! Gotta see it moving...especially after the Endless BBK. I've still gotta figure out what to do with that Ron Jon certificate I won at the National Meet. Thinking about maybe getting the Legends in Graphite Machined, we'll see. In for pics of the new setup!
I prolly wont be lowering her till next year.
Gotta start saving for my wedding
Pulley will happen this year for sure though.
Better get on that RJ certificate! They have a whole bunch of new styles and stuff now. Try something new! We gotta get a local meet together soon see lots of new mods of everyone's rides!
#123
Flagship Aspec
Looking forward to the wheels Chris! I have a feeling they're going to be sick. You definitely need to drop her a little after you put 'em on. And do that pulley too! I definitely look at the ride when driving by windows...or a clean dark-colored car LOL! Gotta see it moving...especially after the Endless BBK. I've still gotta figure out what to do with that Ron Jon certificate I won at the National Meet. Thinking about maybe getting the Legends in Graphite Machined, we'll see. In for pics of the new setup!
The following users liked this post:
tc5280 (06-29-2012)
#128
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Wheels look great, much better than the previous ones
Congrats!
Are they the new Ron Jon's?
Congrats!
Are they the new Ron Jon's?
#129
Mile High
Thread Starter
You get to awe at their full beauty!
Thanks
These are RJ's 18x8 Rev Graphite Metallic wheels with a custom KBP finish.
Can't wait till they get here
These are RJ's 18x8 Rev Graphite Metallic wheels with a custom KBP finish.
Can't wait till they get here
#130
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Oh I thought you had them what is the offset?
#132
Moderator
iTrader: (3)
Whoa those wheels look SICK
When are they getting mounted?
When are they getting mounted?
#133
Mile High
Thread Starter
+32 Offset, should be here any day now, I believe they were shipped when he sent me the pics
Will prolly get them mounted the day I get them or shortly after.
Will prolly get them mounted the day I get them or shortly after.
#134
GODZILLA & 3G TL
Sick dude...those look really good. Definitely want to see them on the car.
And you're DEFINITELY going to want a drop after you get 'em on...trust me. Just sayin.
And you're DEFINITELY going to want a drop after you get 'em on...trust me. Just sayin.
#135
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Happy Friday indeed! Yes, they're nice wheels. Now, let's see them on the car.
#137
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
+32
Can't wait man! +1 on drop!
Can't wait man! +1 on drop!
#139
Mile High
Thread Starter
So quick update. Wheels came in last Friday, and I took them to Discount Tire by my house to get mounted Saturday, but there was a bit of a problem....
Long story short, they wouldn't clear the brembos; were barely knicking them. I got in touch with Rondy at RonJon and we figured out that my rotors are a few milimeters thicker than stock rotors (two pieces) so therefore wheels will not clear without some help.
I ordered 4 hub/wheel centeric 3mm spacers to solve the problem. They should be here this week.
While I was measuring how much of a spacer I needed, I snapped a cell pic:
Hopefully really have them on soon!
Long story short, they wouldn't clear the brembos; were barely knicking them. I got in touch with Rondy at RonJon and we figured out that my rotors are a few milimeters thicker than stock rotors (two pieces) so therefore wheels will not clear without some help.
I ordered 4 hub/wheel centeric 3mm spacers to solve the problem. They should be here this week.
While I was measuring how much of a spacer I needed, I snapped a cell pic:
Hopefully really have them on soon!
#140
Moderator
iTrader: (3)
Those are going to look great once the spacers help out the caliper issue!
Have you thought about removing or redoing the Type-S on the calipers. They are a bit "blingy" and face the wrong way
Have you thought about removing or redoing the Type-S on the calipers. They are a bit "blingy" and face the wrong way
#141
Mile High
Thread Starter
Yea, ive been thinking about that. The chrome didn't turn out the way I thought it would, maybe white brembo logos? I didn't like how it looked the other way, than I look at all the other brembo brakes and their logos are all the other way and I am like WTF!
#142
Moderator
iTrader: (3)
It happens man.
Silver or gunmetal Brembo logos would look great behind those sexy wheels
Silver or gunmetal Brembo logos would look great behind those sexy wheels
#148
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Dude, those are going go look nice. Sorry you had issues, but looking forward to finished pics.
#149
Mile High
Thread Starter
Thanks for the comments everyone, it kills me to see these in their boxes sitting in my living room, not looking like the spacers will be done this week either
Oh well, you know what they say about patience and all
On the advice of the brembo sticker, I ordered some gray ones up but not your normal gray
I am down for that! The Colorado RonJon family
Let me know when you got everything on and we will setup a time
Oh well, you know what they say about patience and all
On the advice of the brembo sticker, I ordered some gray ones up but not your normal gray
I am down for that! The Colorado RonJon family
Let me know when you got everything on and we will setup a time
#151
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Ohh! Can't wait to see these wheels on the car and all done
#152
Mile High
Thread Starter
#154
GODZILLA & 3G TL
I'm down for a meet/photoshoot fellas. We'll set up a time/location soon...just let me know. Wheels are gonna look awesome Chris! Lookin forward to pics when they're on.
#155
Mile High
Thread Starter
Bah!!!! Got an issue guys....
So, both places I have called (Big O Tires, and Discount Tires) refuse to mount my wheels on my car with spacers. Basically I need the tires off my current wheels to be mounted onto my new wheels. Spacers were made for the wheels and the car and are only 3mm so I dunno wtf the problem is.
Anyways, anyone know of somewhere local I can go that will mount my damn wheels?
So, both places I have called (Big O Tires, and Discount Tires) refuse to mount my wheels on my car with spacers. Basically I need the tires off my current wheels to be mounted onto my new wheels. Spacers were made for the wheels and the car and are only 3mm so I dunno wtf the problem is.
Anyways, anyone know of somewhere local I can go that will mount my damn wheels?
#156
Moderator
iTrader: (3)
wtf.
Just have them mount the tires on the wheels and then take them home to install. Return once everything is on for an alignment.
Just have them mount the tires on the wheels and then take them home to install. Return once everything is on for an alignment.
#157
Mile High
Thread Starter
I was thinking of doing that, but can't really drive the car without tires.
Installing the spacers isn't that big of a deal it is basically a 3mm piece of metal drilled out to fit over the hub and have a hole so the wheel can lock in as well...
Hopefully there is a local shop who isn't retarded.
Installing the spacers isn't that big of a deal it is basically a 3mm piece of metal drilled out to fit over the hub and have a hole so the wheel can lock in as well...
Hopefully there is a local shop who isn't retarded.
#158
Moderator
iTrader: (3)
Oh yeah, oops
Try to find a smaller family owned garage. You may pay a little more but most of the time they don't have as many rules as nationwide chains.
Try to find a smaller family owned garage. You may pay a little more but most of the time they don't have as many rules as nationwide chains.
#160
Moderator
iTrader: (3)
wtf, those are nothing.
Tell them to sack up.
Tell them to sack up.