Boring additions
#47
Originally Posted by ua6spec
How is the Tein so far?
I have had no time at all with my son turing two being a 1 car family. Lots of family here from out of town.
I did not want to install them while with stock rims so now I have to buy my tires for the legends then I will put them on with the BBK.
The SC cold air intake is on and it sounds like a monster!
I did install the new boost gauge tonight and it seem to be working fine but I did not get a chance to fire the car up. It has been almost two weeks since I drove it
Also I fucked up painting the grill so insted of the overlay I am just going to take it to a shop and have them paint the roof black, and fix the grill, the chip in the back :rant (damn neighbors) and fix all the other little bumps .
#51
Originally Posted by Kennedy
I just last night found the Nexus "hold the color button for 2 seconds"... Discotech.
So I'm clear, are you showing about 15 lbs of vacuum at idle, 20 lbs of vac at decel , and of course 5 lbs of boost under hard load...?
Makes sense to me as the SC is in bypass until above 4K rpm, so the vaccuum is the engine sucking air... and the surge is the stumble when the manifold goes from "suck to blow"... god I love spaceballs.
So I'm clear, are you showing about 15 lbs of vacuum at idle, 20 lbs of vac at decel , and of course 5 lbs of boost under hard load...?
Makes sense to me as the SC is in bypass until above 4K rpm, so the vaccuum is the engine sucking air... and the surge is the stumble when the manifold goes from "suck to blow"... god I love spaceballs.
My boost gauge shows 15 at idle and 20-25 at decel and then 5 at WOT just like yours. To bad they don't make a 1-5 gauge
Also I got the procats on Sat. I don't think I am doing any more work on the car my self. I have been working on my 99 jeep plus trying to fit in tl stuff and it has been way to much.
Having a two year old you don't have that much free time. I got a good shop that is fair so it will make life easier. I know I am going to get flamed for not doing my own work but o well.
#55
Originally Posted by Distorted Reality
Looks sick Bent, whens the wheels and suspension goin on?
Hopefully I can drop it off this week to be done. I can't wait! To bad my DD is having AC problems Now I am buying a new jeep even though I just installed the AVIC N1
Procats (300hp dyno), drop with edfc, new rims, sway bar, rotora BBK!
#56
iScrape going into
Originally Posted by bent09
Hopefully I can drop it off this week to be done. I can't wait! To bad my DD is having AC problems Now I am buying a new jeep even though I just installed the AVIC N1
Procats (300hp dyno), drop with edfc, new rims, sway bar, rotora BBK!
Procats (300hp dyno), drop with edfc, new rims, sway bar, rotora BBK!
#57
Former Sponsor
iTrader: (12)
Headlights look sick brent, have you hooked the CCFLs yet?
I was going to PM you today asking if you had gotten them yet or not.
BTW how is the CF front lip extension holding up? I am thinking about getting it for my TL as well.
I was going to PM you today asking if you had gotten them yet or not.
BTW how is the CF front lip extension holding up? I am thinking about getting it for my TL as well.
#58
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by bent09
Having a two year old you don't have that much free time. I got a good shop that is fair so it will make life easier. I know I am going to get flamed for not doing my own work but o well.
Couple of Q's...
Where's your Wideband bung installed?
Procats...? You gonna pull the blower to install those?
Speaking of CF lip... Just installed mine too. Great add on.
#59
Originally Posted by bent09
Also I fucked up painting the grill so insted of the overlay I am just going to take it to a shop and have them paint the roof black, and fix the grill, the chip in the back :rant (damn neighbors) and fix all the other little bumps .
I'm brinigng my grill to motorwerks on 59 today.
#60
Originally Posted by JnC
Headlights look sick brent, have you hooked the CCFLs yet?
I was going to PM you today asking if you had gotten them yet or not.
BTW how is the CF front lip extension holding up? I am thinking about getting it for my TL as well.
I was going to PM you today asking if you had gotten them yet or not.
BTW how is the CF front lip extension holding up? I am thinking about getting it for my TL as well.
I had to take the CF lip off to get the bumper off and was suprised how well it is doing. There are no cracks or scratches. Looks like the day I installed it after about a year and 10K miles.
Originally Posted by Kennedy
I have 4 YO and 1 YO... Time is precious these days. Most "fatherdays" and "birthdays" I ask for "an undisturbed day" to work on my cars/bikes... No excuses for not doing your own work...
Couple of Q's...
Where's your Wideband bung installed?
Procats...? You gonna pull the blower to install those?
Speaking of CF lip... Just installed mine too. Great add on.
Couple of Q's...
Where's your Wideband bung installed?
Procats...? You gonna pull the blower to install those?
Speaking of CF lip... Just installed mine too. Great add on.
I was looking at the procats yesterday and I can't think of another way to get the front one in.
Another long weekend
Originally Posted by Krafcik
Where in Houston are you getting your paint done?
I'm brinigng my grill to motorwerks on 59 today.
I'm brinigng my grill to motorwerks on 59 today.
#65
Yeah heavy metallics like silver will flop at different angles and lighting. These parts also don't butt up flush and even, like a rear door to quarter panel edge, so you really see the flop. Probably looks fine in the sun, but Honda does have their bumper problems.
The ride is lookin good!
The ride is lookin good!
#67
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
damn dude you got the procats in less than 48hours...
if you take the entire front end off it can be done maybe... definitely can't be done from underneath unless you know a midget mechanic
if you take the entire front end off it can be done maybe... definitely can't be done from underneath unless you know a midget mechanic
#68
Originally Posted by stillhere153
damn dude you got the procats in less than 48hours...
if you take the entire front end off it can be done maybe... definitely can't be done from underneath unless you know a midget mechanic
if you take the entire front end off it can be done maybe... definitely can't be done from underneath unless you know a midget mechanic
Getting my tires tomorrow and then dropping the car off on Monday for the drop, procats, bbk and rsb.
#77
Originally Posted by bent09
yeahhhh
my wife slapped me and said those are not 18s like we talked about.
Don't be mad I watched your car go from chromed out to a beauty it a matter of days. I am just trying to keep up!
Us ASM guys need to stick together!
my wife slapped me and said those are not 18s like we talked about.
Don't be mad I watched your car go from chromed out to a beauty it a matter of days. I am just trying to keep up!
Us ASM guys need to stick together!