The adventures of Shoeface! (Updated: 8/16/13)
1 Attachment(s)
My name is Dave. I live in Springfield, MO. A bit of an introduction is already here:
https://acurazine.com/forums/3g-tl-2004-2008-93/new-3g-tl-owner-need-your-input-830917/ This is more of less of a log to myself to remember what I've done and in what order. Though I think I've done enough of my own work on my car that will make a worthy progress thread. Not to mention the weather is finally looking up which means there will be more to come throughout the summer! Ok let's start from the beginning: It already had some work done on it from the single owner before me. This is how it looked when I bought it at a Suzuki dealership:
https://i.imgur.com/raIUM.jpg https://i.imgur.com/3DYZo.jpg https://i.imgur.com/7aOUb.jpg https://i.imgur.com/4YRVw.jpg https://i.imgur.com/qnMcX.jpg https://i.imgur.com/Sl6yf.jpg The very first thing I did was get a USAspec iPod kit installed. I can't live without my music! https://i.imgur.com/pz3Ry.jpg For about 5 months afterwards, I only got around to doing 1 other mod = Interior LED's. I also bought Type 2 switchbacks, but didn't get to them until later. I don't have a good enough camera to capture the difference, but I got 6K LED's from VLEDS for the license plate, doors, dome, map, vanity, console, and glove box lights: https://i.imgur.com/pI4ON.jpg This little bugger (vanity light housing) took me like 20 minutes to pop out! https://i.imgur.com/kCVTS.jpg The next "warm" day out, I took advantage and cleaned my muffler tips. Before: https://i.imgur.com/VdFhn.jpg After: https://i.imgur.com/oTyxZ.jpg https://i.imgur.com/4Fu3B.jpg I also installed my Type 2 switchbacks! Changing the bulbs was cake, but changing the resistor on the turn relay was where I went wrong. I had never soldered anything, but I gave it a go anyways. https://i.imgur.com/XeeaQ.jpg https://i.imgur.com/q9eq9.jpg By god it worked! But then later that night, they stopped working completely. Upon a later investigation and 1 new turn relay later, I determined that I f'ed up the board. Anyways, new relay is in with the 0.12 ohm resistor that I had used before and it's been working since then. I like this picture :tongue: Attachment 116250 Next project - roof spoiler and calipers. I ordered my roof spoiler from ebayer BWMOEMSHOP. Great color and fit! https://i.imgur.com/eIECc.jpg https://i.imgur.com/OAtN5.jpg https://i.imgur.com/0piVh.jpg https://i.imgur.com/EFjax.jpg https://i.imgur.com/Fsfzs.jpg https://i.imgur.com/nyAQo.jpg Painted my calipers and hubs black. I picked black because I didn't want them to draw attention to my stock wheels. It's a very settle, but yet a pleasing look. I also swapped out the stock lugs with black stock lugs. Before: https://i.imgur.com/3NPNB.jpg https://i.imgur.com/dbsVg.jpg https://i.imgur.com/7RBZA.jpg After: https://i.imgur.com/6ILdv.jpg https://i.imgur.com/Y5828.jpg And here is where I stand now! https://i.imgur.com/TsAzJ.jpg Upcoming releases:
For the summer, I'm going to do a 3x3 tranny flush with some Redline (will include new pressure switches and filter) and buy a j-pipe! Maybe ATLP will have their new one out by the time I purchase one :wish:. If money allows, I'm also going to get the AZ P2R package and lightweight pulley from XLR8. Maybe the aluminum pedal kit from USR and a Progress RSB. Now that I have this thread posted, I hope to continue to keep it update with some more pics! Please correct me if any of my info is wrong according to what I've described. I'm also open to suggestions, questions, or criticism. Thank you, AcuraZine, for being the money pit that I've been looking for. It's a love/hate relationship, really. |
finish the aspec setup and your golden. nice job so far
|
Originally Posted by dontTL'em'nothing
(Post 13633003)
finish the aspec setup and your golden. nice job so far
Also, whether you know it or not, I want to thank the following people for helping me get this far:
|
Cool. Keep the pics coming.
|
nice job :thumbsup:
|
Nice start! Welcome to AZ!
|
Very nice. There is always that fear of buying something already modified but it looks like it was done right. Welcome to AZ, the wallet raping forum.
|
looks good, now get your drop on and some wheels
|
:wave: Dave. Great progress sir!
Any plans to finish the A-Spec kit? :wish: |
Nicely done, so far...man! Wow, was honored to be on your list for inspiration...especially being up top! :)
J. Keep us updated! |
Well done Dave!
If you're in Springfield, you're just 2-1/2 hours away from Kansas City. Make plans to join us for our National Meet on June 9-10th! |
Originally Posted by CLtotheTL32
(Post 13634594)
:wave: Dave. Great progress sir!
Any plans to finish the A-Spec kit? :wish:
Originally Posted by rockstar143
(Post 13634606)
Nicely done, so far...man! Wow, was honored to be on your list for inspiration...especially being up top! :)
J. Keep us updated!
Originally Posted by Steven Bell
(Post 13634978)
Well done Dave!
If you're in Springfield, you're just 2-1/2 hours away from Kansas City. Make plans to join us for our National Meet on June 9-10th! |
Nice progress Dave, keep up the good work. :thumbsup:
|
Thank you again, man...honestly, I sometimes go back and reread it and find my own older comments and things that used to stump me pretty funny. :)
|
Originally Posted by m.i.n.o.
(Post 13633209)
nice start! Welcome to az!
|
New tint job complete!
Gotta wait a few days for the tint to settle and then wash the car. I'll probably have some new pics next weekend after installing the visors. |
So after it stopped raining for 5 days straight, I finally was able to wash my car this morning and take a few pics before work. I went with a 20% all around with 3M's FX-HP because to me, it was less hazy than the Color Stable line. I should have the window visors installed next week after I give the tint a few days to settle.
https://i.imgur.com/VDIbh.jpg https://i.imgur.com/INinO.jpg |
Nice Dave-you'll like the 20%'s. I've got 20% on my Type S.
|
20% here too...wise choice, dave. :rockstar:
|
Originally Posted by Shoeface
(Post 13651892)
I should have the window visors installed next week after I give the tint a few days to settle.
|
Originally Posted by Steven Bell
(Post 13652670)
Nice Dave-you'll like the 20%'s. I've got 20% on my Type S.
Originally Posted by SharksBreath
(Post 13654205)
20% here too...wise choice, dave. :rockstar:
Originally Posted by ebelp
(Post 13654306)
Just fyi...you don't need to roll down your windows to get the OEM visors installed. :thumbsup:
|
Window visors installed!
I'll have some pics up later this week after a wash. |
Hmmm...Actually, I did need the windows down to install my oem visors...AND the weathertechs. :) You have to pull down the inside weatherstrip.
PICS PLEA$E! |
where do you guys get window visors? are oem better or weather tech?
|
I bought mine from AckTL05. He does group buys and such.
https://acurazine.com/forums/sponsored-sales-group-buys-10/group-buy-anything-oem-796482/ The OEM ones look A LOT better than something like WeatherTech has to offer. |
So it's been quite some time since I've posted here or done anything to my car. That's probably because I've been rearranging my life - got a job at the Sprint headquarters in KC! I start my new job on the 29th, so whoever is in KC, we'll have to hang soon. This also means that I'm a definite, 100%, absolute for the KC national meet :thumbsup:
Anyways, I haven't done anything to my car besides drive it. I'll have a garage soon enough to complete my summer to-do list, but I hadn't uploaded an pictures recently of the window visors, so after I gave it a wash today, took some more pictures. Enjoy! https://i.imgur.com/NYN0P.jpg https://i.imgur.com/FlETX.jpg https://i.imgur.com/o9hrc.jpg https://i.imgur.com/zYONF.jpg https://i.imgur.com/2cbim.jpg |
Congrats on the new job! You'll have fun at the National Meet :thumbsup:
|
Car looks great dude! :)
|
I just moved from Arizona to Missouri. Is all that nasty rust what I can look forward too? Fuck that sucks. Makes me hate rain and humidity even more.
|
damn congrats on the job, lucky being so close to the national meet
|
^He got a job in KC so he could go to the meet.
Progress looks good. keep it up :thumbsup: |
Progress is looking good, now just please complete the A Spec kit.
|
Originally Posted by CLtotheTL32
(Post 13768815)
Congrats on the new job! You'll have fun at the National Meet :thumbsup:
Originally Posted by Undying Dreams
(Post 13768844)
Car looks great dude! :)
Originally Posted by RU_JELLY
(Post 13769662)
damn congrats on the job, lucky being so close to the national meet
Originally Posted by 05_NBP_TL
(Post 13769932)
Progress looks good. keep it up :thumbsup:
Originally Posted by mY sLOW UA6
(Post 13769961)
Progress is looking good, now just please complete the A Spec kit.
Originally Posted by twigglius
(Post 13769099)
I just moved from Arizona to Missouri. Is all that nasty rust what I can look forward too? Fuck that sucks. Makes me hate rain and humidity even more.
|
I like! Can't wait to see some wheels.
|
Sweet progress!
Have an exhaust video? |
Congrats on the new job at Sprint, Dave! Buda works there too.
We'll be glad to have you as part of the KC posse. Be sure to join our Mo/Kan TL Social Group from my signature below. |
Originally Posted by guitarplayer16
(Post 13770631)
Have an exhaust video?
Originally Posted by Steven Bell
(Post 13770877)
Congrats on the new job at Sprint, Dave! Buda works there too.
We'll be glad to have you as part of the KC posse. Be sure to join our Mo/Kan TL Social Group from my signature below. |
just saw this thread....
you have made some serious progress....and in the right direction....and thanks for the list....we are all here to help.... see you at the meet :thumbsup: |
The trim pieces look really good on the black!
|
Originally Posted by swoosh
(Post 13782387)
just saw this thread....
you have made some serious progress....and in the right direction....and thanks for the list....we are all here to help.... see you at the meet :thumbsup:
Originally Posted by Xsupreme
(Post 13801463)
The trim pieces look really good on the black!
|
All times are GMT -5. The time now is 05:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands