3G TL Interior/Exterior + Switchback LED Videos
#1
3G TL Interior/Exterior + Switchback LED Videos
Hey guys...there are a lot of videos/photos on this already but I thought I post another couple videos to hopefully convince those who haven't done this inexpensive mod to get it done ASAP! Let me know if you have questions and there are DIYs for all these mods in this forum.
Here's the list of the LEDs I bought from www.v-leds.com and remember to use ACURAZINE as the promo code to get 15% off
- Front Dome: V-LEDS HID WHITE 6 LED M-SMT FLANK BULBS 194 168 158 2825
- License Plate:HID WHITE HIGH POWER LICENSE PLATE LED BULBS 194 168 158
- Reverse Lights:V-LEDS HID WHITE 14 M-SMT 5W HIGH POWER BULBS
- Rear Dome: 2 HID WHITE 6 LED LIGHT BULBS 194 168 158 2825 W5W s
- Door:2 SUPER HID WHITE 4 LED WEDGE BASE 194 158 168
- Switchback: V-LEDS DUAL COLOR CHANGING HID WHITE/AMBER 48 M-SMT PARKING/TURN SIGNAL BULBS 7443 7443NA
- Resistor: 6 OHM 50W 2 BULB LED LOAD RESISTORS TURN SIGNAL BLINKER FIX 7443 7440 3157 1156 1157
Switchbacks w/ 6000K Headlight Bulbs
http://www.youtube.com/watch?v=vNwaoZUdMYc
Interior+Exterior LEDs
http://www.youtube.com/watch?v=R1N1VR9X6R4
SICK!
Here's the list of the LEDs I bought from www.v-leds.com and remember to use ACURAZINE as the promo code to get 15% off
- Front Dome: V-LEDS HID WHITE 6 LED M-SMT FLANK BULBS 194 168 158 2825
- License Plate:HID WHITE HIGH POWER LICENSE PLATE LED BULBS 194 168 158
- Reverse Lights:V-LEDS HID WHITE 14 M-SMT 5W HIGH POWER BULBS
- Rear Dome: 2 HID WHITE 6 LED LIGHT BULBS 194 168 158 2825 W5W s
- Door:2 SUPER HID WHITE 4 LED WEDGE BASE 194 158 168
- Switchback: V-LEDS DUAL COLOR CHANGING HID WHITE/AMBER 48 M-SMT PARKING/TURN SIGNAL BULBS 7443 7443NA
- Resistor: 6 OHM 50W 2 BULB LED LOAD RESISTORS TURN SIGNAL BLINKER FIX 7443 7440 3157 1156 1157
Switchbacks w/ 6000K Headlight Bulbs
http://www.youtube.com/watch?v=vNwaoZUdMYc
Interior+Exterior LEDs
http://www.youtube.com/watch?v=R1N1VR9X6R4
SICK!
The following users liked this post:
EdgarV619 (02-17-2014)
#3
#7
Looks good.
But i'm still satisfied with my V2 switchbacks
http://www.youtube.com/watch?v=PnSpDctIclg
But i'm still satisfied with my V2 switchbacks
http://www.youtube.com/watch?v=PnSpDctIclg
Trending Topics
#8
^
|
nice..definitely can't compete with that.
thx guys for the comments.
kris- i think im all LED'd out now..the only other thing id like to do is have the sidemarkers blink but its a little bit of work. Maybe I'll get to it sometime.
|
nice..definitely can't compete with that.
thx guys for the comments.
kris- i think im all LED'd out now..the only other thing id like to do is have the sidemarkers blink but its a little bit of work. Maybe I'll get to it sometime.
#12
Does anyone know if to replace the side markers you have to do the mod discussed in this forum. or can you use the switch back bulbs from http://autolumination.com/7443_7440.htm the
120 High Powered Wide Angle SMT LEDS. or could use the
7443 OR 7440 15 leds
INTRODUCING
THE WEDGE MATRIX LED BULB
7440 single curcuit bulb? Would i just be able to plug in either one of these without the mod?
Any advise would really be appreciated. Thank you in advance.
120 High Powered Wide Angle SMT LEDS. or could use the
7443 OR 7440 15 leds
INTRODUCING
THE WEDGE MATRIX LED BULB
7440 single curcuit bulb? Would i just be able to plug in either one of these without the mod?
Any advise would really be appreciated. Thank you in advance.
#13
Can the Fog lights be upgraded to the white light without any wire modification? Such as is discussed with the 6000K HID post in this forum. I did not see if there was a need to upgrade wiring like when the reverse light is changed.
#14
Chapter Leader (San Antonio)
iTrader: (3)
Joined: Oct 2008
Posts: 6,022
Likes: 435
From: Houston, Texas
Looks good.
But i'm still satisfied with my V2 switchbacks
http://www.youtube.com/watch?v=PnSpDctIclg
But i'm still satisfied with my V2 switchbacks
http://www.youtube.com/watch?v=PnSpDctIclg
#15
I will be installing my switchbacks this weekend (hopefully), and I am seeing alot of different things here as to how many load resistors I will need to make the switchbacks blink correctly.
I have 2x - 30 Led SMT Tower Style 7443 plastic wedge base
and 2x (one per each side) - 6 Ohm deluxe aluminum, 50 watt LED Load Equalizer.
Do I only need 1 6 Ohm deluxe aluminum, 50 watt LED Load Equalizer per side?
Thanks!
I have 2x - 30 Led SMT Tower Style 7443 plastic wedge base
and 2x (one per each side) - 6 Ohm deluxe aluminum, 50 watt LED Load Equalizer.
Do I only need 1 6 Ohm deluxe aluminum, 50 watt LED Load Equalizer per side?
Thanks!
#16
Do you have cleared reflectors in your headlights? I didn't see ANY amber color when the switchbacks were set to "run" vs "flash".
#17
to be able to properly run switchbacks to show the white color you need
1. clear usr style diffusers
2. type-s diffuser
3. delete oem amber diffuser
if you try to run switchbacks when you still have the full amber diffuser, you will end up with yellow parking lights while on the ON mode. but when engage the turn signal it will still look amber because of the amber led + amber diffuser.
white led (parking light mode, not turn signal mode) + amber diffuser = yellowish light.
#18
to answer your question, from what it seems in the video the OP deleted his amber diffuser, that's why you see no amber when its on.
to be able to properly run switchbacks to show the white color you need
1. clear usr style diffusers
2. type-s diffuser
3. delete oem amber diffuser
if you try to run switchbacks when you still have the full amber diffuser, you will end up with yellow parking lights while on the ON mode. but when engage the turn signal it will still look amber because of the amber led + amber diffuser.
white led (parking light mode, not turn signal mode) + amber diffuser = yellowish light.
to be able to properly run switchbacks to show the white color you need
1. clear usr style diffusers
2. type-s diffuser
3. delete oem amber diffuser
if you try to run switchbacks when you still have the full amber diffuser, you will end up with yellow parking lights while on the ON mode. but when engage the turn signal it will still look amber because of the amber led + amber diffuser.
white led (parking light mode, not turn signal mode) + amber diffuser = yellowish light.
#19
that is with amber diffuser and white running lights
last 10 seconds of the video really shows you how yellow it looks compared to the correct amber color.
Last edited by vietxquangstah; 11-10-2011 at 01:42 AM.
#21
it looks pretty cool though. its really bright yellow and really stands out compared to everyone elses amber / orange corner lights.
also when you hit the lock or the unlock button your corner lights flash yellow. looks pretty cool to me lol. i had my switchbacks in with amber diffuser for about a month than i got clear diffusers installed.
Honestly I was dying to get switchbacks for a very long time, and now I finally got the clear diffusers installed i'm kind of let down... The switchbacks look very bluish-white. 6000k white.
it looks good when your parking lights are on by itself, but as soon as you turn on your headlights your corner lights look very blue in contrast....
my last picture makes the switchback bulb and headlights look like they are matching just A LITTLE bit.... but really in person the corner light looks whitish blue compared to the head light. like you see in the 2nd picture
#22
myniceguy > Yes I also would like to replace my fog lights (bulbs) on the 2007 TL to a better white and more brighter; SO if any kind gentleman (Acurazine buddy) would like to run me through the process and what kind of bulbs, it would be muchly appreciated.
#23
Sorry to hear about the blue color. Yeah, in the one picture, it looks like a perfect match. How did you remove the amber diffusers? Did you have to melt your headlight seals and seperate the lense from the housing? I did that on my last TL but not sure if I'm interested in doing that to my 3rd gen.
#24
HELP!!!
Have LED's in the rears as of last week and work great. Put my new VLEDs Switchbacks in the fronts and everything seemed to work great only when I turn on, say...the left blinker, it flashes orange AND the right flashes white! What the hell???
Have LED's in the rears as of last week and work great. Put my new VLEDs Switchbacks in the fronts and everything seemed to work great only when I turn on, say...the left blinker, it flashes orange AND the right flashes white! What the hell???
The following users liked this post:
SurfingScotty (11-17-2011)
#27
Just in case I took a video. Here is what it's doing after about 5 mins of the LEDs being on.
http://imageshack.us/clip/my-videos/100/d92h.mp4/
**Thanked**
#28
Talked to Bill and VLED's, told him what was happening. He said, "that's weird". He then proceeded to tell me how the relay works and how it was a system error and couldn't be the bulbs. He DID say they would take them back, however. What to do?
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
11-16-2015 09:30 PM
navtool.com
1G RDX Audio, Bluetooth, Electronics & Navigation
1
09-25-2015 06:15 PM