OBX Exhaust Installed (w/video)
#1
JLR / MoparSRT
Thread Starter
OBX Exhaust Installed (w/video)
Alright ladies and gents,
Its been a long while since i have been on here, formally known as AcuraJ32A but that ship has sailed since my old email got hacked so cant recover that account. Anyway im back and now i went from 2nd Gen ('00) to a 3rd Gen ('06). Got the bug after i Installed the Inspire Fog Light mod and CAI. Now ive moved to exhaust.
I believe there have been questions about this on so i decided to pull the trigger on this one HERE.
Below is the Bone stock i took about a year ago with a Motorola Moto X 1st Gen.
Next below is the new exhaust as listed in the ad/link above. Footage taken witha GoPro Hero 4 Silver
Any question's comments or concerns please let me know. It is great to be back among people who appreciate and love these cars, Honda and Acura
Its been a long while since i have been on here, formally known as AcuraJ32A but that ship has sailed since my old email got hacked so cant recover that account. Anyway im back and now i went from 2nd Gen ('00) to a 3rd Gen ('06). Got the bug after i Installed the Inspire Fog Light mod and CAI. Now ive moved to exhaust.
I believe there have been questions about this on so i decided to pull the trigger on this one HERE.
Below is the Bone stock i took about a year ago with a Motorola Moto X 1st Gen.
Next below is the new exhaust as listed in the ad/link above. Footage taken witha GoPro Hero 4 Silver
Any question's comments or concerns please let me know. It is great to be back among people who appreciate and love these cars, Honda and Acura
Trending Topics
#8
JLR / MoparSRT
Thread Starter
Im glad its making waves here hahaha. I did a photo shoot out at local state park here with the recent snow fall and should have them up today. along with GoPro footage with 0-60+ pulls from exhaust view to really give a better sense of what it sounds like. As far as interior drone goes, not nearly as bad as one would think. That being said, once I have new rubber on I'll be able to give y'all footage from inside. Thanks again for all the input so far gents, its good to be back on here. Check back tonight or very soon for more details
#10
Hey there Takara,
I'm interested in the OBX exhaust, but I cant seem to find a lot of in cabin videos. Would it be too much trouble for you to film some in cabin video while you're driving around?
I found one of an Accord which sounded pretty good, but there isn't a lot of other than that one.
Unfortunately ATLP doesn't make their base exhaust anymore and I really like the oval shaped exhaust tips. The OBX pipe is the only one that offers a tip similar to the stock OEM tips other than the ATLP one.
I'm interested in the OBX exhaust, but I cant seem to find a lot of in cabin videos. Would it be too much trouble for you to film some in cabin video while you're driving around?
I found one of an Accord which sounded pretty good, but there isn't a lot of other than that one.
Unfortunately ATLP doesn't make their base exhaust anymore and I really like the oval shaped exhaust tips. The OBX pipe is the only one that offers a tip similar to the stock OEM tips other than the ATLP one.
#14
Racer
iTrader: (1)
I am running the stock j-pipe, replacing that will be next. I did this by myself on jack stands and hand tools. fyi im 5' 7" and 135lbs. Not saying it was easy but if I can do it I think its easy enough if you have a friend help. I did have to go to the local muffler shop and have the guy break loose the nuts from the cat converter due to lots of rust
#17
Would someone with a base model TL take a picture of their exhaust straight on? I love how well the stock exhaust tips fit in the bumper cutouts and that's one of the reasons I really liked the ATLP base exhaust. However since they no longer produce it, the OBX looks like it would work well with it's ovaled tips.
I'm on the fence about it and would really appreciate it if someone could take a picture showing how well it fits in with the bumper. The videos and pictures provided are usually at an upward angle or the quad exhaust.
I'm on the fence about it and would really appreciate it if someone could take a picture showing how well it fits in with the bumper. The videos and pictures provided are usually at an upward angle or the quad exhaust.
#21
Racer
iTrader: (1)
Would someone with a base model TL take a picture of their exhaust straight on? I love how well the stock exhaust tips fit in the bumper cutouts and that's one of the reasons I really liked the ATLP base exhaust. However since they no longer produce it, the OBX looks like it would work well with it's ovaled tips.
I'm on the fence about it and would really appreciate it if someone could take a picture showing how well it fits in with the bumper. The videos and pictures provided are usually at an upward angle or the quad exhaust.
I'm on the fence about it and would really appreciate it if someone could take a picture showing how well it fits in with the bumper. The videos and pictures provided are usually at an upward angle or the quad exhaust.
https://acurazine.com/forums/photogr...-build-943914/
1st pic is what you desire....I think
@94eg!
yes the quad tip does fit A-Spec rear bumper. Cutting is necessary for quad tip on base bumper.
The following users liked this post:
Mystralhawk (04-17-2016)
#22
Bummer on the quad-tips. That weird oval tip is no-bueno. I guess you could replace them with something single & round for pretty cheap.
So what's the deal with this exhaust. I noticed the quad version on ebay is over $900 now......yet the dual-oval version is still in the $350's. Looks like the quad version has bolt-together flanges while the dual-oval uses slip-fit connections.
So what's the deal with this exhaust. I noticed the quad version on ebay is over $900 now......yet the dual-oval version is still in the $350's. Looks like the quad version has bolt-together flanges while the dual-oval uses slip-fit connections.
#23
Racer
iTrader: (1)
Honestly I don't mind the oval but the little thing that does bug me is how I can see so much of the tip from the side. I'll go with a different tip in the future but I have other needs. Flange was at the front and the rest was slip on with some bolted down connectors. Been driving with it close to 2 months, and I do like it a lot for the budget....
#25
#28
https://acurazine.com/forums/photogr...-build-943914/
1st pic is what you desire....I think
@94eg!
yes the quad tip does fit A-Spec rear bumper. Cutting is necessary for quad tip on base bumper.
1st pic is what you desire....I think
@94eg!
yes the quad tip does fit A-Spec rear bumper. Cutting is necessary for quad tip on base bumper.
The right tip looks a little angled in the bumper cutout. :-/ I guess that could be corrected with the hangers and whatnot. But yeah, at some angles it does look like it sticks out a bit further than I'd like. Does it look like that can be adjusted/fixed?
Thanks!
Last edited by Mystralhawk; 04-17-2016 at 03:58 PM.
#30
#32
JLR / MoparSRT
Thread Starter
Sorry gents i haven't checked on this thread in a while. All that being said i will post video's from in cabin very soon. I just had a wheel bearing fixed that mistaken for bad tire noise and spent good money on some Continetal DWS's(absolutely fantastic tire btw). Thankfully it was under warranty so I didnt have to mess with much. Today was the first time i have really heard it myself and let me tell you it is F'n beautiful!!! Look for them to be up this Friday after I charge up both GoPro's and set them up inside the cabin and out. I will Also Share multiple shots from the exterior and underneath.
The following users liked this post:
Mystralhawk (04-22-2016)
#35
10th Gear
Join Date: May 2016
Location: Los Angeles, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Just got this exhaust a week ago and I am really enjoying it, but I might want to go a little louder? Anyone know anything that would help? I also have the resonators on still, should I replace that with a straight pipe? I have the catback system installed and everything else is stock.
Thread
Thread Starter
Forum
Replies
Last Post
EL BAN
3G TL Performance Parts & Modifications
17
02-11-2016 09:46 PM