Hey guys! I have a clutch masters light weight fly wheel. Should i get the stage 3 clutch or 1? Im going to put on all the bolt ons so i was just wondering which u guys suggest i should do?

 

stg 3 fiber tough with tl-s !! 08040-HDFF-R

stg 3 kevlar for 3,2 tl !! 08028-HDTZ-A

 

im curious why u say the stg 3 kevlar for the 3.2 cause i have a base model turbo tl, and im also in the market for a clutch, ive been searching all i can fine is the spec and clutch master and alot of people say they suck!

 

Pm Josh at XLR8, he was working on some new clutch kits that sounded good.

 

i cant find fiber tough for 3.2 on clutch website !! couple years past i run stg 3 400whp easy with my civic h22 !!

 

you just have to ask for the fiber tough for the base. I have stg3 with fbr tgh and am fully bolted/ported... Its a good clutch and handles great when theres load. getting off of first sometimes sucks but i love mine. Depends how much you drive and if its city VS highway..

 

Get the stage 3 with fiber tough disc. <-I'm running that setup. The clutch grabs hard! There will be chatter but it's not that bad at all. Just makes sure you rev at ~2000ish RPM when taking off for less chatter.

 

Im running the full face kevlar and wouldn't mind running something more aggressive.

 

We actually have good experiences with the FX300 with Fiber Tough material. It's a good material that is really streetable.

We actually have one unit in stock for those of you who are interested. $1200 shipped to the cont 48 US. Just send payment via Paypal to excelerate@sbcglobal.net if interested.