I am installing the rockford fosgate 360 as we speak and wanted to know do I tap into the wiring before or after the stock amp???? PS I still want to keep my bluetooth capability. Thanks..... Any help will be gladly appreciated.

 

Not sure if it would effect it but try a line out converter

 

I did it both ways. Tapping after the stock amp resulted in a loud noise floor - lots of audible hissing. I then re-did the connection before the amp, which required solding up some RCA connectors to those signal lines. Now the hiss is long gone. I do have to run the head unit at 40 to get a decent input signal at the 3Sixty. Please note in both cases I left the stock amp running the center channel. No HFL issues.

 

i did it after the amp and i have no noise what so ever...it sounds very clear ... before i was using a loc runinng into a clarion eq which sounded ok but i had that hiss..i am using monster rca cables and wire runinng into 2 rockford fosgate amps ...my front are mb quarts and my rear i am using 2 kicker free air 6.5 subs for midbass and the pioneer 8 sub in my stock location with dynamat all over the place...it sound very good too me...