My Secret Media Player REVEALED - Mediagate MG-25P
#121
#122
Safety Car
Thread Starter
Yea, that is an expensive sensor. It costs more than the Mediagate enclosure! The plug looks correct though.
I've tried searching the site for a better IR sensor, but they have so many items that are infrared. I think someone should try to call them and ask.
I've tried searching the site for a better IR sensor, but they have so many items that are infrared. I think someone should try to call them and ask.
#123
Another IR Sensor
I found a little bit cheaper one at $56 as opposed to the $100 one. Its the IR-2105 model found on this product page. I think its the second one down.
I will keep looking and post my results. Hopefully I can find one cheap enough that somebody will try it. I have the iLink right now but been having some annoying probs with it, sound issues. I would order a soundgate if I knew I could get an external IR sensor for it. Ive found a couple cheaper ones that look like they just need the mini stereo plug put on the end. However I dont know what wire goes to what pin on the plug. Anybody know if there is a standard wire color code for those type?
Back to searching.......
I will keep looking and post my results. Hopefully I can find one cheap enough that somebody will try it. I have the iLink right now but been having some annoying probs with it, sound issues. I would order a soundgate if I knew I could get an external IR sensor for it. Ive found a couple cheaper ones that look like they just need the mini stereo plug put on the end. However I dont know what wire goes to what pin on the plug. Anybody know if there is a standard wire color code for those type?
Back to searching.......
#124
I'm pretty sure this Alpine KRE-500E will work but it won't be available until the end of next month. A little pricey but these external remote eyes are difficult to come by.
The total will probably be around $31.00 after shipping. You can preorder yours if you really want one. I have heard of Crutchfield before.
The total will probably be around $31.00 after shipping. You can preorder yours if you really want one. I have heard of Crutchfield before.
#125
Nice find!!!
It says on the specifications page of the crutchfield site that it has a 2.5mm plug and not a 3.5mm. It could be a typo though. Has anyone even verified it as a 3.5mm stereo plug yet? Datmrman said something about calling them for specs???
It says on the specifications page of the crutchfield site that it has a 2.5mm plug and not a 3.5mm. It could be a typo though. Has anyone even verified it as a 3.5mm stereo plug yet? Datmrman said something about calling them for specs???
#128
Originally Posted by Crook
Good eye hoTLanta, I didn't even notice the specs. It does say "sub-mini plug".
If it turns out to be a 2.5mm plug then you'll need one of these adapters.
If it turns out to be a 2.5mm plug then you'll need one of these adapters.
I decided to look up the Alpine unit that this IR sensor plugs into and it does in fact say 2.5mm. With those adapters you found that shouldnt be a problem though.
I just ordered my Avox Jukebox and 120GB hard drive, stupid NewEgg credit card. Everytime I pay it off I have to go and get something new. Sounds like me and Datmrman need to go to tech-junkie rehab.
Anyhow, my stuff should show up in 2 days. Newegg has awesome shipping, its almost instant gratification!!
#130
Safety Car
Thread Starter
Originally Posted by hoTLanta
Sounds like me and Datmrman need to go to tech-junkie rehab.
Originally Posted by lembowski
That $35 one I got you keeps sounding better and better huh Chris?
#131
Trucki!!
iTrader: (1)
Originally Posted by datmrman
Yea, but $25, or even FREE, would have sounded better. Well, if you didn't locate the IR, I would be more active searching for one. The sensors that people are finding look promising and are not that expensive. I'm just glad I have one to complete my install.
#132
TL Loverrrrrrr
Matt, allright, I gave in.. i will get the $35 IR Sensor from the PB store. How do I go about getting one? You gonna get one for me and I will pay you? or you can give me the phone number of the store, I can call them and arrange to pick one up?
It is just sucks that the IR sensor cost about 1/3 of the actual AVox unit.
It is just sucks that the IR sensor cost about 1/3 of the actual AVox unit.
#133
Trucki!!
iTrader: (1)
Originally Posted by waacow
Matt, allright, I gave in.. i will get the $35 IR Sensor from the PB store. How do I go about getting one? You gonna get one for me and I will pay you? or you can give me the phone number of the store, I can call them and arrange to pick one up?
It is just sucks that the IR sensor cost about 1/3 of the actual AVox unit.
It is just sucks that the IR sensor cost about 1/3 of the actual AVox unit.
#134
Originally Posted by datmrman
Look what I've found:
Myron & Davis IR Sensor for AMT-202, Model AIR-01
For sale here for $11.99:
http://www.anythingwholesaleaz.com/i...PROD&ProdID=32
Looks like this might work! You might want to call to verify its a 3.5" mini stereo plug IR sensor. If it is,
Myron & Davis IR Sensor for AMT-202, Model AIR-01
For sale here for $11.99:
http://www.anythingwholesaleaz.com/i...PROD&ProdID=32
Looks like this might work! You might want to call to verify its a 3.5" mini stereo plug IR sensor. If it is,
EUREKA!!!
I don't know if anyone actually tried this but instead of contacting anythingwholesalez.com...
I contacted Myron and Davis directly and spoke with Steven in TECH and he confirms that its a mini stereo plug
heres the number to M&D 909.796.3199 if you someone wants to confirm this...
so maybe hopefully we can save some money and get the $12 sensor instead of the $35 one
-Kevin
#137
Three Wheelin'
Join Date: Jul 2005
Location: Central NJ
Age: 39
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FADE
I orderd the one from the wholesale place so I will let you know when i get it.
#138
I should be getting my AVOX unit and hard drive today. I hope we can find a usable IR sensor soon!!!! I am sure my iLink sensor would work but if I send the iLink back for the problems I am experiencing with it, the sensor will have to go with it......or will it???
#140
Originally Posted by lembowski
It doesn't hurt to do what I did guys. Just walk into some of your local car audio/video stores and ask if you can purchase one from there car dvd players. Thats what I did, and guess what I heard?.......sure
In-store Off-the-Shelf car DVD players? Or employee personal car DVD players?
I just have a hard time seeing a retailer open up a sealed complete DVD player box and selling me just the IR sensor........I guess its worth a shot though.
#141
Trucki!!
iTrader: (1)
Originally Posted by hoTLanta
I just have a hard time seeing a retailer open up a sealed complete DVD player box and selling me just the IR sensor........I guess its worth a shot though.
he said he would just call myron & davis and try to order a few more.
#142
Originally Posted by lembowski
Thats exactley what they did..........
he said he would just call myron & davis and try to order a few more.
he said he would just call myron & davis and try to order a few more.
Im gonna give your approach a try this weekend lembowski, I hope I am as successful as you were. If I find an IR sensor that works I will keep you guys posted on model/price info.
If I succeed I will be replacing the iLink with the AVOX unit this weekend. Hopefully the rain holds off. Pennsylvania weather relly sucks these days....
#143
I am still waiting for the one I ordered from the wholesaler place.
It has been over 100 deg here for all most 2 weeks, so I hope it cools down enough so I do not die doing my install.
It has been over 100 deg here for all most 2 weeks, so I hope it cools down enough so I do not die doing my install.
#144
Safety Car
Thread Starter
Originally Posted by hoTLanta
If I succeed I will be replacing the iLink with the AVOX unit this weekend.
#145
Originally Posted by datmrman
hotLanta, did you get the chance to try the iLink's IR sensor with the AVOX? If it works, we'll have another part to search for.
This is killing me because I wanted to install it this weekend. I went to 5 different places today and could not find either of the parts I need. I need a 5volt/2amp adapter. I found one for an XM reciever and I thought the plug was the right one but the center pin is just a little too big on the AVOX unit. I looked at each place I went for the IR reciever as well. The places I struck out in order were Tweeter, Cyber Warehouse, WeeBee Audio and Video, Circuit City, then finally Radio Shack. I had no idea these parts were so hard to come by. After much frustration and $10 in gas I gave up for the day. I think I am going to call Vantec and AL Tech to see if they have any recommendations for the IR sensor. Wish they would have just included one like the iLink.
#146
Trucki!!
iTrader: (1)
Originally Posted by hoTLanta
Not yet, if the weather holds out I will be trying it this evening or tomorrow. I will post as soon as I know.
This is killing me because I wanted to install it this weekend. I went to 5 different places today and could not find either of the parts I need. I need a 5volt/2amp adapter. I found one for an XM reciever and I thought the plug was the right one but the center pin is just a little too big on the AVOX unit. I looked at each place I went for the IR reciever as well. The places I struck out in order were Tweeter, Cyber Warehouse, WeeBee Audio and Video, Circuit City, then finally Radio Shack. I had no idea these parts were so hard to come by. After much frustration and $10 in gas I gave up for the day. I think I am going to call Vantec and AL Tech to see if they have any recommendations for the IR sensor. Wish they would have just included one like the iLink.
This is killing me because I wanted to install it this weekend. I went to 5 different places today and could not find either of the parts I need. I need a 5volt/2amp adapter. I found one for an XM reciever and I thought the plug was the right one but the center pin is just a little too big on the AVOX unit. I looked at each place I went for the IR reciever as well. The places I struck out in order were Tweeter, Cyber Warehouse, WeeBee Audio and Video, Circuit City, then finally Radio Shack. I had no idea these parts were so hard to come by. After much frustration and $10 in gas I gave up for the day. I think I am going to call Vantec and AL Tech to see if they have any recommendations for the IR sensor. Wish they would have just included one like the iLink.
Dear Matt,
Our distributor in USA is 'Anyware Computer Accessories'. please contact Anyware & ask where you can buy them.
Sorry for causing you inconvience.
Best Regards,
Yuna
Anyware stated that they have never recieved the car adapters, and the ir remote hasn't been released by the company. They had no recomendations on where to get an ir or the car adapter. They told me that an archos car adapter would work......but it didn't. Your better off getting a small power inverter from radio shack and waiting to iriver gets the h100 car adapters back in stock late september. Your more than welcome to try this power adapter and tell us if it works. I've already bought an adapter and a ir remote that didn't work, so I don't feel like trying anything else out. Oh, I've also emailed both al tech and vantec so I've done my research.
#147
Originally Posted by lembowski
Let me save you a few days of waiting for a response:
Dear Matt,
Our distributor in USA is 'Anyware Computer Accessories'. please contact Anyware & ask where you can buy them.
Sorry for causing you inconvience.
Best Regards,
Yuna
Anyware stated that they have never recieved the car adapters, and the ir remote hasn't been released by the company. They had no recomendations on where to get an ir or the car adapter. They told me that an archos car adapter would work......but it didn't. Your better off getting a small power inverter from radio shack and waiting to iriver gets the h100 car adapters back in stock late september. Your more than welcome to try this power adapter and tell us if it works. I've already bought an adapter and a ir remote that didn't work, so I don't feel like trying anything else out. Oh, I've also emailed both al tech and vantec so I've done my research.
Dear Matt,
Our distributor in USA is 'Anyware Computer Accessories'. please contact Anyware & ask where you can buy them.
Sorry for causing you inconvience.
Best Regards,
Yuna
Anyware stated that they have never recieved the car adapters, and the ir remote hasn't been released by the company. They had no recomendations on where to get an ir or the car adapter. They told me that an archos car adapter would work......but it didn't. Your better off getting a small power inverter from radio shack and waiting to iriver gets the h100 car adapters back in stock late september. Your more than welcome to try this power adapter and tell us if it works. I've already bought an adapter and a ir remote that didn't work, so I don't feel like trying anything else out. Oh, I've also emailed both al tech and vantec so I've done my research.
Did anyone try that M&D remote eye?
This is such a PITA. I think I am going to lop off the end of the XM adapter and wire it to the end of the AVOX power supply cord. I will then try the IR remote I got with the iLink tomorrow.
#148
Oh, BTW, here is the adapter I ended up buying. It meets the right power specifications but the plug is the wrong size. Like I said before I am going to Frankenstien it.
XM Adapter F5X005
XM Adapter F5X005
#149
Trucki!!
iTrader: (1)
Originally Posted by hoTLanta
The bad news is that they have been waiting for almost a month now since they are coming from overseas with no idea when they will get there.
#152
Originally Posted by lembowski
Its the same sensor that datmrman and I have. Crook was using a myron & davis one I think
Let me just verify....this one work for sure correct?
If so its on order
#154
Three Wheelin'
Join Date: Jul 2005
Location: Central NJ
Age: 39
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
For those that are looking for a car adapter, this is the one i bought:
car adapter
I know someone here said it didn't work, but it works fine for me.
car adapter
I know someone here said it didn't work, but it works fine for me.
#155
Safety Car
Thread Starter
Originally Posted by hoTLanta
#156
I just bought an '05 TL last weekend and am really new to all this. I don't even know how to connect a video source to the navigation system. I guess there are standard audio/video inputs to the navi? Would someone mind posting a list of everything needed in order to connect the mediagate and get it up and working. Thanks!
#157
I ordered from the wholesale place. They took my money and I have yet to get a tracking #. I called them up and the kid told me he was going to check on it and call me back. Well, still no word and no one answering the phone. Stay clear of this fucking place. I went by fries and picked up a power inverter so the power problem is solved. The guys in the car stereo shop gave me an I/O eye they had laying around but it doesn’t work
#158
Safety Car
Thread Starter
acones_ou, Welcome to the forums!
In order to add video input to the factory navigation system, you will need to purchase a video interface. Many are using Dom's TVandNav2Go module. He is currently running a group buy here.
In order to add audio input(s) to the factory head unit, you will need to purchase an audio interface. There are a few that will allow you to add iPod integration, aux-in, or both. Here is a summary of the popular ones. I would recommend Blitzsafe HON/AUX DMX if you don't care for iPod integration, USA Spec PA11-HON2 for iPod + 1 aux input, or PIE X3 for 3 aux inputs.
Those are the two main modules you will need to add to incorporate DVD/PS2/XBOX/Carputer/Mediagate to the factory system.
There are a few threads around with details on each type of install. Just search and browse a bit. Here are mine:
In order to add video input to the factory navigation system, you will need to purchase a video interface. Many are using Dom's TVandNav2Go module. He is currently running a group buy here.
In order to add audio input(s) to the factory head unit, you will need to purchase an audio interface. There are a few that will allow you to add iPod integration, aux-in, or both. Here is a summary of the popular ones. I would recommend Blitzsafe HON/AUX DMX if you don't care for iPod integration, USA Spec PA11-HON2 for iPod + 1 aux input, or PIE X3 for 3 aux inputs.
Those are the two main modules you will need to add to incorporate DVD/PS2/XBOX/Carputer/Mediagate to the factory system.
There are a few threads around with details on each type of install. Just search and browse a bit. Here are mine:
#159
Safety Car
Thread Starter
FADE, sorry to hear about your ordeal with the wholesale place. Hopefully they will update you on the status of your order. I would continue to check back with them during normal business hours. Just be calm and cool. Good luck with it!
Any details on the IR eye that the local stop gave you? What about it thats not working?
Any details on the IR eye that the local stop gave you? What about it thats not working?
#160
Fade, post an image of that I/O eye that you have. Does it look like the Alpine one posted earlier?
I found a remote eye in my junk wire box and it didn't work at firest when I plugged it into the media player. I then experimented and rearranged two of the three wires on the cable and it now works. I think that you might be able to get a remote eye working as long as it has the right mini plug and the wires are arranged correctly.
I found a remote eye in my junk wire box and it didn't work at firest when I plugged it into the media player. I then experimented and rearranged two of the three wires on the cable and it now works. I think that you might be able to get a remote eye working as long as it has the right mini plug and the wires are arranged correctly.