Check this deal out!!!!
#1
Instructor
Thread Starter
Join Date: Jan 2008
Age: 42
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Check this deal out!!!!
Hey,
I thought i'd share my findings with everyone. I just bought (2) 12" 600w dual 4ohm HiFonic subwoofers including shipping and buysafe insurance for $71.08 ! I got $10 off by using a coupon code. Great a$$ deal on this site:
take a look at http://www.cardiscountstereos.com/. Good luck and enjoy shopping. Oh and the coupon code for $10 off is: 9998
Also if your looking to buy over $99 dollars worth try this site: http://www.onlinecarstereo.com/ because shipping is free if your order is over $99!
I thought i'd share my findings with everyone. I just bought (2) 12" 600w dual 4ohm HiFonic subwoofers including shipping and buysafe insurance for $71.08 ! I got $10 off by using a coupon code. Great a$$ deal on this site:
take a look at http://www.cardiscountstereos.com/. Good luck and enjoy shopping. Oh and the coupon code for $10 off is: 9998
Also if your looking to buy over $99 dollars worth try this site: http://www.onlinecarstereo.com/ because shipping is free if your order is over $99!
#2
good score PK!
if the lightweight crank pulley is in your modding plans- make sure to get the
`stock diameter` NOT the underdrive-
600watts is about the limit with that one- not enough revs to the alternator at idle to sustain all the draw
I have seen your car, and can imagine the power required for the decibals
if the lightweight crank pulley is in your modding plans- make sure to get the
`stock diameter` NOT the underdrive-
600watts is about the limit with that one- not enough revs to the alternator at idle to sustain all the draw
I have seen your car, and can imagine the power required for the decibals
#3
Instructor
Thread Starter
Join Date: Jan 2008
Age: 42
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01tl4tl
good score PK!
if the lightweight crank pulley is in your modding plans- make sure to get the
`stock diameter` NOT the underdrive-
600watts is about the limit with that one- not enough revs to the alternator at idle to sustain all the draw
I have seen your car, and can imagine the power required for the decibals
if the lightweight crank pulley is in your modding plans- make sure to get the
`stock diameter` NOT the underdrive-
600watts is about the limit with that one- not enough revs to the alternator at idle to sustain all the draw
I have seen your car, and can imagine the power required for the decibals
well i got a 600watt kenwood amp that is gonna push em both but i think i'm gonna by a capacitor so the amp can run off the capacitor and not draw a lot of power from my battery. Or i could just buy a motorcycle battery and put it in the trunk! ha ha
I meant to ask what is a crank pulley and what does it do? where does it go?
#4
crankshaft pulley- all the belts go to it and inside the engine, the rods connect to it and the whole engine lives off it- stock weighs 8 lbs
replacement lightweight pulley LESS than 2 pounds
that makes for faster revving vroom vrooom
and the UnderDrive one, at cruise, reduces the electrical draw by turning the AC and alternator slightly slower- reducing their overall drag
With the stock size pulley in lightweight version- you still make the same electrical output, just much quicker revs- gets to vtec faster- is really fun to drive!
replacement lightweight pulley LESS than 2 pounds
that makes for faster revving vroom vrooom
and the UnderDrive one, at cruise, reduces the electrical draw by turning the AC and alternator slightly slower- reducing their overall drag
With the stock size pulley in lightweight version- you still make the same electrical output, just much quicker revs- gets to vtec faster- is really fun to drive!
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
brandnewcolony
3G TL (2004-2008)
53
09-12-2015 10:39 AM