Hey everyone,

I had a few questions about a double in install in an 07-08 tls, and I was hoping someone could help me out. First, I wanted to know which wires I need to loop to retain the nav screen function. I saw a few other threads with information about this in the 04-06 model, but I also saw that the wires were different in the 07-08 model. I read it was on the 40 pin connector. I also wanted to know if there was any way to make the prompts function with the aftermarket head unit through the center channel. My last question was about the antenna. Does anyone know if this is the antenna that I need to plug into my aftermarket unit.https://www.amazon.com/Metra-Electro...B000K4YOCG#Ask . I am using a 42000nex. Thanks in advance.

 

U planning on having the steering wheel controls working

 

Yes, I installed the aswc-1 for the steering wheel controls.

 

07-08 TL/TL-S is the pink & blue on the 40 pin connector. It's number 13 & 26 I think from the factory harness. The $2 resistor can be found in RadioShack. I think you need 60 ohm if I remember correctly.

 

Mike did u find any answers

 

The antenna wire will already be in your car. Your swap from stock to new HU.

 

how did the steering wheel control module work out? i'm looking at that one if i do a double din install. which steering wheel controls still work after the module?
any update on the antenna?

thanks