Just purchased Lexol cleaner and conditioner, Stoner's Invisible glass cleaner and 303 Aerospace Protectant. Have used the glass cleaner, it is amazing stuff, works great!

I bought the 303 to use on my dash, and the Lexol cleaner and conditioner for my leather seats after reading several threads on here. However, I am not sure the proper procedure to apply the 303 to the dash and the Lexol conditioner and cleaner on the seats. Also, any particular duration of time that one should wait to use these products for best results?

Would appreciate any advice on the application/proper procedure of the above products. Thanks for your time fellow TL owner’s!!!

 

for the lexol i use a terry cloth applicator pad, the seats usually absorb so much of it that i do not have to wipe off too much excess. i let the lexol sit for 1-2 minutes and then wipe the excess off with terry cloth towel. for the 303 i do the same thing except i don't use an applicator pad, instead i use a microfiber towel. it does not leave the lint that some terry cloth towels do. i also wipe the excess with a microfiber as well.

 

i just added Maguirres. (dont know how u spell it). and it was awsome. left my seats nice and black and smooth.. softy.. just sprayed it and used this round cotton froam thing thats covers with 100% cotton. like a pad to wax the outside of the but smaller for the leather.. and i sprayed seats and rubbed it on and let it sit in and absorb... just watch for spots that to much was left and wipe of or spread it evenly around that area and watch it absorb again.


Now is there such thing of too much coditioner? When and how ofter should this be done. cuz i do it every 2 weekd. or 3 weeks.