Baxton

Apparently you are not allowed to need a replacement dust cap for the front wheel hub. If anyone knows where to find one please let me know. 2008 TL

Turbonut

iTrader: (1)

What dust cap are you referring? Don't know of any on the front, but the rear has a cap.

Tripnbeats

theres a dust shield for the back parts of the brakes on the hub but thats about it.

Baxton

The wheel bearing dust cap that covers the spindle nut

Turbonut

iTrader: (1)

Haven't looked at the Acura for some time, but don't know of any dust cap on the front.

Tripnbeats

yea on the back of the spindle u have to split the bearing n spindle and it has 4 screws thats holding it to the knuckle. take those off and u have urself a dust cover.
http://www.acuraoemparts.com/delray/...sep4_b2201.gif

Baxton

I am looking for a cap that was pressed into the center of the front wheel hub. You have to remove it before you can see the spindle nut. My car came with one from the factory but I cannot find a reference to it in any service manual or parts site. Maybe it is not required.

Baxton

[IMG]file:///C:/Users/Joe/AppData/Local/Temp/moz-screenshot-1.png[/IMG]Goes on the center of this hub covering the spindle nut

Tripnbeats

well when u go to http://www.acuraoemparts.com/delray/jsp/catdisplay.jsp the parts ur looking for will be in front brake or in knuckle sections.....the parts on both those pages line up to create the kunckle

Tripnbeats

and the ccap ur talking about isnt on the tl to my knowledge..... its the rim that protects it.

Baxton

Three days of no sleep had me thinking there was a cap on the front which I have been searching for for the last two days. There isn't only in the rear. Going to sleep now.