Clear Bra installer in So cal?
05-06-2004, 02:31 PM
#41
100k miles club
Join Date: Mar 2004
Location: 909, CA
Age: 45
Posts: 2,297
Likes: 0
Received 0 Likes
on
0 Posts
ya i have a friend who's parents have a tint business and won't install the moleskin either. but i got an estimate for $215. they're in riverside, if you're interested let me know. they do custom tinting too but won't do the moleskin though lol. the name is A1 Tinting
05-06-2004, 02:52 PM
#42
is learning to moonwalk i
I talked to a couple tint shops in the Orange area about doing only the rear windows and one was $140 without moleskin, the other was $110 without, $160 with. They said $25 per door for moleskin install.
Still debating the clear bra install. I'm sure after I drive up past Bakersfield this weekend, I'll wish I had it done.
Still debating the clear bra install. I'm sure after I drive up past Bakersfield this weekend, I'll wish I had it done.
05-26-2005, 06:56 PM
#44
Instructor
Join Date: Jun 2001
Age: 52
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Just had my clear bra installed by Jared at Sheeld Industries in Huntington Beach. Great job! Was worried how it would look on the WDP, but it looks fine. He ended up doing the full kit (bumper, hood, fenders, mirrors and lights) for $495!! 
Did the large kit also. The one that goes almost halfway up the hood. LA freeways suck so this was a must for me. All rock trucks should burn in hell. :angryfire
Did the large kit also. The one that goes almost halfway up the hood. LA freeways suck so this was a must for me. All rock trucks should burn in hell. :angryfire
05-27-2005, 03:13 PM
#45
Luv my TL
anyone heard about auto advance engineering? i have an appointment with them tomorrow to install clear bra on my TL. I found them on the list of dealers in socal on the xpel.com website.
07-10-2005, 08:37 PM
#50
Instructor
Join Date: Jun 2005
Location: In a silver Ac bumpin DJ Quik
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I was quoted $500 for a clear bra from a shop called StarShield Armor in Irwindale, CA. I saw a Fountain Valley shop listed in the thread, I'll give them a call since they're much closer.
07-11-2005, 01:29 PM
#52
Advanced
Join Date: Mar 2005
Location: Costa Mesa, CA
Age: 46
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Msnowdon
I have been talking with Sheeld Industries in Huntington Beach, he has been really good following up, my problem is finding the time.
Michael
Michael
04-02-2006, 11:16 PM
#55
Originally Posted by w1n78
ya i have a friend who's parents have a tint business and won't install the moleskin either. but i got an estimate for $215. they're in riverside, if you're interested let me know. they do custom tinting too but won't do the moleskin though lol. the name is A1 Tinting
Guys, call this guy:
Best Window Tinting, Inc.
3045 Edinger Avenue
Tustin, CA 92780
(949) 930-6200
Ask for Carlos. Moleskin, 3m non-metallic, dye-free, lifetime warranty on all windows for $160. He did an excellent job.
Good luck!
Steve
04-03-2006, 11:59 AM
#56
Instructor
Join Date: Jun 2001
Age: 52
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
One year update....
Well I hate to report that my experience with Sheeld Industries and their product (Avery Film) has gone bad. It all started a few months back when my film started to discolor. It was very strange. The film would absorb the soap color when I would take it to get washed and would stain extremely easy from bugs or droppings. Jared came out and replaced the hood part of the bra once, only to have the same problem happen again. Now the whole bra is starting to turn yellow. I don't know if he used a cheap film or what, but on a WDP you can really tell. I contacted Jared about a month ago and he said he would order me a different brand of film (3M). Well, a few weeks went by and no word from Jared. I called him three or four times since and he said it was on its way. This morning I called again and his phone and e-mail have been disconnected. It looks like I am out of luck.
Stay away from Sheeld Industries! (if you can get a hold of them)
Well I hate to report that my experience with Sheeld Industries and their product (Avery Film) has gone bad. It all started a few months back when my film started to discolor. It was very strange. The film would absorb the soap color when I would take it to get washed and would stain extremely easy from bugs or droppings. Jared came out and replaced the hood part of the bra once, only to have the same problem happen again. Now the whole bra is starting to turn yellow. I don't know if he used a cheap film or what, but on a WDP you can really tell. I contacted Jared about a month ago and he said he would order me a different brand of film (3M). Well, a few weeks went by and no word from Jared. I called him three or four times since and he said it was on its way. This morning I called again and his phone and e-mail have been disconnected. It looks like I am out of luck.
Stay away from Sheeld Industries! (if you can get a hold of them)
04-03-2006, 12:51 PM
#57
PPF FYI:There are only a few manufacturers of PPF (3M, Llumar [CP Films], Venture Shield [Venture Tape], Clearshield [Bekaert] and Avery) otherwise known as clearbra 3M is the only manufacturer that has a layer of clearcoat. All of them offer basically the same warranty against yellowing, peeling and cracking and somewhat similar protection characteristics. These manufacturers offer a lifetime warranty on their products (Llumar and Venture Shield) while Clearshield, Avery and 3M offer a 5 year warranty. VS offers two thicknesses - 8 and 15 mil, while the others are 8 mil. As to which PPF is best, that's up for debate.
Most 3rd party vendors such as Xpel, Clear Mask, StonGard, etc. use 3M as their choice of film and some will offer the other brands. They offer pre cut kits with two types of coverage; standard and extended. Some of these vendors do installs or can refer you to a local installer. Some shops will custom install using bulk film. As far as the cost, it will vary with the installers, type of PPF package and factor in geographical location as well. Most applications/installations start at about the $500 range for your standard coverage.
You have two very good sources of expertise and information; Rockblocker and Mark the 3M Bra Man. If you have a question, I would suggest sending them a PM.
Most 3rd party vendors such as Xpel, Clear Mask, StonGard, etc. use 3M as their choice of film and some will offer the other brands. They offer pre cut kits with two types of coverage; standard and extended. Some of these vendors do installs or can refer you to a local installer. Some shops will custom install using bulk film. As far as the cost, it will vary with the installers, type of PPF package and factor in geographical location as well. Most applications/installations start at about the $500 range for your standard coverage.
You have two very good sources of expertise and information; Rockblocker and Mark the 3M Bra Man. If you have a question, I would suggest sending them a PM.
04-03-2006, 02:36 PM
#59
Originally Posted by walker29
Do you think they can help me with a warranty claim with Avery?
Avery Dennison Graphics Division North America offers SPF 1000 Surface Protection Film, a high-gloss, non-yellow urethane film designed to protect multi-purpose vehicles for up to five years against paint chipping and other damage caused by outdoor elements such as stones, bugs and abrasion.
For more information about Avery Dennison’s SPF 1000 film, visit www.averygraphics.com or call the Avery Graphics AnswerLine at 1-800-443-9380.
For more information about Avery Dennison’s SPF 1000 film, visit www.averygraphics.com or call the Avery Graphics AnswerLine at 1-800-443-9380.
04-08-2006, 10:32 AM
#63
Instructor
Join Date: Jun 2001
Age: 52
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Jared made it right. He came out and replaced the Avery film with 3M film.
If you are in Socal give them a call. Sheeld Indtustries in Huntington Beach.
If you have a WDP I would recommend going with another film instead of Avery.
If you are in Socal give them a call. Sheeld Indtustries in Huntington Beach.
If you have a WDP I would recommend going with another film instead of Avery.
01-10-2007, 10:40 AM
#65
Instructor
iTrader: (1)
Join Date: Nov 2006
Location: Kalifornistan
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
It seems like most of these places went out of business? EDL does not have a website, nor does Sheeld Industries. I don't know how to get a hold of either one of them.
Thread
Thread Starter
Forum
Replies
Last Post
HydrasunGQ
Member Cars for Sale
0
09-14-2015 10:14 PM
asahrts
Member Cars for Sale
0
09-04-2015 05:55 PM
