Approaching 200k
Approaching 200k
Good evening Ziners.
My Base '07 TL/Navi is going to have her 200k mile birthday this year and I have a few new parts set aside for her and want to get some input on other parts I 'probably should' replace while I am in there.
All thanks to Rob (Yungone501) for putting together a solid j35z with beautifully machines j37 bolt ons and stage 2 cams I will be dropping it in this year. I have new OEM shocks ready to slide under it. The CV axles are starting to make a little noise so those are getting swapped too. I planned to do tie rods, ball joints and wheel bearings while I am in there, but wanted to come to you guys for:
Parts I should replace and what brands I should use for those replacement parts. I have come to trust all of you on here and would feel better knowing what to buy for replacement parts.
Thank you all again,
Jesse
My Base '07 TL/Navi is going to have her 200k mile birthday this year and I have a few new parts set aside for her and want to get some input on other parts I 'probably should' replace while I am in there.
All thanks to Rob (Yungone501) for putting together a solid j35z with beautifully machines j37 bolt ons and stage 2 cams I will be dropping it in this year. I have new OEM shocks ready to slide under it. The CV axles are starting to make a little noise so those are getting swapped too. I planned to do tie rods, ball joints and wheel bearings while I am in there, but wanted to come to you guys for:
Parts I should replace and what brands I should use for those replacement parts. I have come to trust all of you on here and would feel better knowing what to buy for replacement parts.
Thank you all again,
Jesse
i would just go with OEM for that stuff.. take a look at delray acura, they got sweet prices!! 25% off MSRP and type in acurazine in the comments box and get 5% off your total order.
Good evening Ziners.
All thanks to Rob (Yungone501) for putting together a solid j35z with beautifully machines j37 bolt ons and stage 2 cams I will be dropping it in this year. I have new OEM shocks ready to slide under it. The CV axles are starting to make a little noise so those are getting swapped too. I planned to do tie rods, ball joints and wheel bearings while I am in there, but wanted to come to you guys for:
All thanks to Rob (Yungone501) for putting together a solid j35z with beautifully machines j37 bolt ons and stage 2 cams I will be dropping it in this year. I have new OEM shocks ready to slide under it. The CV axles are starting to make a little noise so those are getting swapped too. I planned to do tie rods, ball joints and wheel bearings while I am in there, but wanted to come to you guys for:
When I saw that you're installing a new motor, I figured you know much more about this car than I do!
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
80
Jan 9, 2025 04:40 PM
rockyboy
2G RDX (2013-2018)
171
Aug 4, 2024 10:35 AM


