I noticed that the fabric covering on the 3rd brake light cover is sagging loose in some spots. Is this a common problem? If I take the cover off can the fabric be removed and then reapplied with some 3M spray adhesive? It bugs me when I see it in the rearview.

 

Should have put this in the Problems forum. My bad. :ashamed:

 

Yes that can be done. I did the same thing except used some black fabric instead of tan, which is what was on it.

 

Cool, thanks for the info. I will take a look at removing it and getting the fabric off. It's already black since the car has black interior.

 

It just pops off. No bolts or anything. Don't go too wild with the glue or it might bleed through.