BBS LM REPS wheel help.
#47
im baaaack!!
Yea 245 40 19 shouldnt rub stock but with a drop it will. I would roll the fenders if you want that size. I have 225 40 18 on a 8.5” rim 45 offset. I want to go 18x9.5 40 offset on the same tire. I might have to roll the fenders also.
#48
Burning Brakes
Thread Starter
looks like i have to do 245/35 if i dont want to roll my fenders.
to summerize my research lol
these are the wheels:
http://www.wheeldude.com/catalog/pro...oducts_id=5771
19x8.5 +38 all around
245/35/19
on TEIN SS
to summerize my research lol
these are the wheels:
http://www.wheeldude.com/catalog/pro...oducts_id=5771
19x8.5 +38 all around
245/35/19
on TEIN SS
#49
im baaaack!!
With that offset you will fit kind of flush with the fenders a 245 35 19 might be to wide also. You might have to roll them also. Remember 245 is wide 35 is high and 19 is rim.
#50
Three Wheelin'
I think you should be fine with 245/35 tire if you not gonna slammed you tsx defcon runs 245/35 on 9.5" rim and hes dropped 1.6f. 1.4r and he doesnt have his fender rolled (someone correct me if im wrong)
#51
im baaaack!!
245 35 19 on a 9.5” wide rim will be a slight stretch on the tire. So the tire is less space consuming. That and offset makes a difference the lower the offset the more it moves toward the outside of the fender.
#52
Burning Brakes
Thread Starter
im not going to max out the TEINS...im new to the whole lowering scene. reason i wanted tein ss is for later on if i do decide to change my setup and go lower but as of now i think 1.5 is about where ill be -/+ .2inches
#54
Burning Brakes
Thread Starter
exactly. if tobac is on 19x9.5 on +35 what im planning would be a little bit sunken compared to tobac and also narrower since i want to do 8.5? i would think i wouldnt rub if his specs dont? am i wrong to think this?
#55
im baaaack!!
If you put the same tire tire on a 8.5 and a 9.5 the height on the 8.5 will be higher and tire stick out the rim slightly. The 9.5 will overall be lower and the tire will slope awa from the edge of the rim. Therefore there will be slight cearance between the rim and the tire.
#57
im baaaack!!
235 40 19 might work. I found a wheel calculator online a few weeks ago that would really be helpful but I cant seem to find it again. Id say go to a good tire shop that has tires in stock and have them install one for test fit. 235 35 19 would be bad on potholes
Last edited by T-jay; 09-28-2011 at 07:55 PM.
#63
I'm going with a 19x9.5 offset +22 center bore 73.1.
Tires are 255/40/19 some sticky tires idk what brand yet.
Fenders will be pulled and rolled to get a flush look with the tire.
Flush but not hellaflush more like hellafunctional.
Tires are 255/40/19 some sticky tires idk what brand yet.
Fenders will be pulled and rolled to get a flush look with the tire.
Flush but not hellaflush more like hellafunctional.
#66
Burning Brakes
Thread Starter
anyone else wanna chime in?
while looking on google...
225/40 looks like it looses sidewall from being stretched
245/35 looks like it has more sidewall without stretching
while looking on google...
225/40 looks like it looses sidewall from being stretched
245/35 looks like it has more sidewall without stretching
Last edited by jeroplex; 09-29-2011 at 06:31 PM.
#67
Burning Brakes
Thread Starter
i read on danew604 post that on his 19x8.5 +35 bbs he ran 245/40/19 and rolled fenders while on BC coils. i wonder if i can get away with +38 on same size wheel and tire w/o rolling with with +38
#68
If you're going 19x9 or 19x9.5, I'd probably go with 225. That would be enough for clearance if you're going to slam your car? But you'll also need to roll your guards though :\
The following users liked this post:
jeroplex (10-02-2011)
The following users liked this post:
jeroplex (10-02-2011)
#73
#78
Sorry to thread jack but I didn't want to make a new thread. Do you guys think 19x9.5 +30 will fit the fronts? My friend says +30 will definitely not fit the fronts if I'm going with 9.5 but I don't think they have any other sizes.. and he also said even if I go with a higher offset, I'll be hitting the inside wall? I know defcon runs 9.5 +45? or +40.. maybe.. But yeah, 19x9.5+30 will fit the rears, that's no problem.. It's just the front I'm worried about.
I've already gotten my front guards rolled. My car is sort of slammed.
Thanks guys!
I've already gotten my front guards rolled. My car is sort of slammed.
Thanks guys!
#80
Drifting
Sorry to thread jack but I didn't want to make a new thread. Do you guys think 19x9.5 +30 will fit the fronts? My friend says +30 will definitely not fit the fronts if I'm going with 9.5 but I don't think they have any other sizes.. and he also said even if I go with a higher offset, I'll be hitting the inside wall? I know defcon runs 9.5 +45? or +40.. maybe.. But yeah, 19x9.5+30 will fit the rears, that's no problem.. It's just the front I'm worried about.
I've already gotten my front guards rolled. My car is sort of slammed.
Thanks guys!
I've already gotten my front guards rolled. My car is sort of slammed.
Thanks guys!