DIY Intake Resonator video
#1
Drifting
Thread Starter
DIY Intake Resonator video
Also towards the end you'll see me doing a fitment test on a type s front lip
took me about 10 minutes to do everything
http://www.youtube.com/watch?v=zk0LNwah374
took me about 10 minutes to do everything
http://www.youtube.com/watch?v=zk0LNwah374
#5
SeeYou2Crew #2
lol man, u made that look really easy!
lol and i too, will be buged if not all of my clips are in lol. but i guess since ur doing so much bumper work all the time, leaving the clips out help saves a lot of time
good sht.
lol and i too, will be buged if not all of my clips are in lol. but i guess since ur doing so much bumper work all the time, leaving the clips out help saves a lot of time
good sht.
#7
Drifting
Thread Starter
releases the air and noise restriction.
after the removal, the car sounds like it has a cold air intake at 4-5k RPM
i did it just because i like how the car sounds meaner. i didnt do it for performance gains.
after the removal, the car sounds like it has a cold air intake at 4-5k RPM
i did it just because i like how the car sounds meaner. i didnt do it for performance gains.
Trending Topics
#8
Advanced
Join Date: Aug 2010
Location: Buffalo Grove, Illinois
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
#9
Drifting
Thread Starter
#10
Advanced
Join Date: Aug 2010
Location: Buffalo Grove, Illinois
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
#12
d0wN sHiFtInG
can you post a video to show how it would sound without the resonator...
As far as performance gains go, you probably lost some low end and maybe just maybe gained some top end.
As far as performance gains go, you probably lost some low end and maybe just maybe gained some top end.
#14
http://www.youtube.com/watch?v=jmSsk..._order&list=UL
#16
#18
Burning Brakes
I made these clips after I took out the rubber coupling tube between the airbox and resonator. Technically the resonator is still in but is being bypassed since the coupler is gone. I later took the resonator out while I was putting the areo kit in.
http://www.youtube.com/watch?v=bfmRKjC9BTo
http://www.youtube.com/watch?v=2HaSm7vBdro&NR=1
http://www.youtube.com/watch?v=frPOz...eature=related
http://www.youtube.com/watch?v=bfmRKjC9BTo
http://www.youtube.com/watch?v=2HaSm7vBdro&NR=1
http://www.youtube.com/watch?v=frPOz...eature=related
#21
that sounds awesome!
donny: im pretty sure its the same for the 3g tl
donny: im pretty sure its the same for the 3g tl
#26
Nice I did this last week. So my honest opinions, sound is definitely nice. Has a sweet, deep roar on full throttle above 3k RPM. haven't noticed a lot of improvement in throttle response, gains don't seem noticeable. I FEEL there's a loss of punch in low end torque, but I'm not sure if it's because I expect more with the louder sound? IDK..
In any case we're installing a Takeda intake next week so that should be a lot of fun.
Here's my vid on the resonator delete if anyone wants to hear a sound comparison:
In any case we're installing a Takeda intake next week so that should be a lot of fun.
Here's my vid on the resonator delete if anyone wants to hear a sound comparison:
#28
Also towards the end you'll see me doing a fitment test on a type s front lip
took me about 10 minutes to do everything
http://www.youtube.com/watch?v=zk0LNwah374
took me about 10 minutes to do everything
http://www.youtube.com/watch?v=zk0LNwah374
The following users liked this post:
RevoMate (07-08-2019)
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
SUPRMN84
3G TL Audio, Bluetooth, Electronics & Navigation
5
10-07-2015 09:46 PM