Finally installed the 02-03 fog switch with the help of extra fuses and electrical tape.




and something me and my friend installed on my cousins 330

 

Man, angel eyes make my heart melt everytime

 

good job yo

 

they look great!

 

clean install.
now its time to save up for a drop.

 

looks good, nice and clean job too.. your buttons are backwards lol, doesn't really matter though. you have any more pics of the wood grain interior?

 

Thanks for the compliments guys. Kind of messed up though on the driver side cause some epoxy got onto bumper. But o well lesson learned.. tape bumper next time.

Haha thanks but yea saving up for some bilstein shocks and h&r springs this summer.

Yeah didn't feel like pulling out all the switches and lining the fog switch first. The fog switch wiring was a bitch. But yeah I'll grab more pics of the wood interior today.

 

nice install man

 

do you have anymore pictures of wood trim?

 

Looks like it was always there...clean install.

 

!!Update!!
Wood Trim... Need to get Burlwood shif knob in the future.
..........
....................................
.........
........

 

^ does wood trim match with the oem wood trim that came with the car? I thought our car matches better with mahogany?

 

Uhm that is oem wood trim. But yea I think that mahogany is lighter in color than the oem wood trim but iono. Maybe someone can chime in on that.

 

so those wood trim are oem? Also, I would like to know whether our cars needs burlwood shift knob or mahogany. about to order one, but rather confirm before the action.

 

Yup its been on the car since my mom got it in 98. Also just check out your wood trim, if its dark like mines then get the burlwood shift knob. If its a light wood trim then its mahogany. Just send some pics of your wood trim to me and I can confirm it or just post it on here.

 

Not feeling the wood trim.

Glad you like it.

 

looks good if you can, can you get some pics of all the wiring im kinda stuck on that right now

 

Actully I tend to like that wood trim to me it sorta gives that extra luxary feel, IMO it completes it.

 

Will do, Thanks for the words.

 

Not my engine bay but just an example.
"Highlighted in red goes to fuse box:
Take off the plastic cover on the blue wire so that it just shows the connector.
Make sure the to take off the plug on the red wire and attach a new female connector like the blue wire."

"Highlighted in blue you can just take out the wire if you didn't already."

"Highlighted in green just attach it to the metal screw where it touches metal."



Right above the gas pedal remove a big rubber circle thing and some insulation just remove that and move onto the next step.



Punch the rubber through in the engine bay. Then put your harness through from inside the car. "This picture hurt me cause the hood struts are blown and the hood fell down on me"

Then put the red wire with the new connector in the slot as pictured and the blue one on the bottem.

Then just mount your fog switch and your good. If your plastic connector didn't fit in with the civic fog switch then just take off the connector use some electrical tape and plug them onto the prongs on the fog switch.

If you have the 02-03 tl switch then you'll need 4 new small female connectors and replace the ones currently on there.
Then have the fog switch facing like the picture below
1.Then plug the First prong on top with one of the black wires,
2. Skip the second prong,
3. Third prong attach one of the red wires
4. Fourth prong attach the other red wire.
5. Fifth prong attach the last black wire

 

hey how did you wire the fogs to the stock 02-03 switch? never mind i didnt see the last part lol

 

Yeah thats how I feel about it. If it was wood trimless then all the black would kind of just dull the image of the center console.

 

where did you find the small female connectors at? i couldnt find them anywhere or if i did their to big? what store did you go to?

 

Try radio shack if you already hit up all the other auto stores. If you been to all those places then your stuck with GHETTO RIGGING haha.
lol uhm well I ghetto rigged *made the connectors bigger by knife and covered them up wit electrical tap crimped them a bit* the connectors so they would clip onto the prongs and since the wire I took out from the harness had a small female connector i just took out that one and replace one of the connectors with that connector. Just make sure wires are on the plugs tight and taped up good so they don't touch each other and your good.

 

so if i do the hook up this way will my fogs blink when i unlock and lock the doors?

 

Yea you can if you left the fog switch on. I tend to leave it off so that I don't attract attention.

 

so if i hook it up the way you did it on post #20 it will blink when i unlock and lock the door

 

Looks good minus the gold emblems lol

 

nice job on the fogs. that is way too much wood trim for my taste.

 

Haha yeah I plan to change that this summer friends keep on complaining. Just don't want to spend $50 for the wings and and acura badges for the front and back right now.

Haha thanks. Yeah when I was younger I didn't like the wood but then it just kinda grew on me since I grew up so I just got accustomed to it.

 

Yup just leave the switch in the on position to make it blink with the corner lights when you unlock/lock the door.
For example: "excuse the grunts haha"