Changed my wheels
02-13-2010, 06:12 PM
#1
03 TL Type S Noble Green
Thread Starter
Join Date: Nov 2006
Location: So Cal
Age: 65
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Changed my wheels
I know, needs to be lowered some more, can't do it. I don't want to scrape anywhere and my wife also drives it.
Last edited by fsttyms1; 02-13-2010 at 06:34 PM.
02-13-2010, 09:42 PM
#4
02-13-2010, 11:38 PM
#5
03 TL Type S Noble Green
Thread Starter
Join Date: Nov 2006
Location: So Cal
Age: 65
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
18X8 +45 offset. And I had Tien HTechs with Yellow Konis installed. A very mild drop which is what I wanted.
I can only find the factory front and back lip but no sides, so I've giving up on the kit. This will have to do.
I can only find the factory front and back lip but no sides, so I've giving up on the kit. This will have to do.
02-14-2010, 01:23 PM
#6
DESI miern
i like these better.. but you should def. decide to lower it more. even an inch would be good and i dont think that would put you at too much risk of scraping and what not
02-14-2010, 02:43 PM
#7
03 TL Type S Noble Green
Thread Starter
Join Date: Nov 2006
Location: So Cal
Age: 65
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Yesterday I rented a spring compressor and tried to re-adjust the ring in the shocks but couldnt. Any ideas as to how to do this short of disassembling everything?
Trending Topics
02-14-2010, 05:24 PM
#8
Moderator
iTrader: (3)
That looks good man! Drop that ish asap.
02-15-2010, 07:13 AM
#10
Senior Moderator
Take the shock off of the car, then compress them. Once all the tension is off you should be able to (with a big ring pliers open the ring enough to slid it down. You will want to get an alignment afterwards though.
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
nanos
Car Parts for Sale
26
11-12-2015 08:41 PM