00' SSM Droped on 19" Hiros
#1
00' SSM Droped on 19" Hiros
Oh, if you didn't think that 19"x8.5" with a +45 offset wouldn't work, here you go. As you can see with my sig, the car is definatly on the way... What should be my next mod? Opinion please!
That statement sums it all up for me!
That statement sums it all up for me!
#5
looks nice 'cept for the sticker. Funny but if you going for the clean look. which you car is look like, LOOSE THAT STICKER. Nice choice of rims BTW. That was one of my choice slong with axis muse gunmetal, Gewalt III EVo which I end up geting, and something else but I didnt want rims with a lip so I went with the Gewalt. That way mt rims look bigger. ANYHOW, nice ride!
#6
You see, most people who see a young person driving a nicer car automaticly assume that It was your parents who baught the car. This is my answer to that. There are many people that think that I shouldn't have my car and this is simply my response to all of those people. "You should just sell it" is what I got plenty of times, "shut the fuk up and it's "powered by deez nuts"... not to you, just to all of those people who couldn't see it coming...
Trending Topics
#9
Originally Posted by PDX3.2TL
You see, most people who see a young person driving a nicer car automaticly assume that It was your parents who baught the car. This is my answer to that. There are many people that think that I shouldn't have my car and this is simply my response to all of those people. "You should just sell it" is what I got plenty of times, "shut the fuk up and it's "powered by deez nuts"... not to you, just to all of those people who couldn't see it coming...
i hear ya, but i dont get when being poor became the cool thing to be. even if your parents did get you the car so what? i dont see why ppl think like that. so your parents bought you a car, why does that take away from the person? i dunno, im jus sayin....
neways, the car looks sick. im tryin to get similar 18's when i get the money together. your 19's look sick but potholes are a bitch!
next mod: DEF get the oem or WW kit!!!
#11
Senior Moderator
iTrader: (2)
Joined: May 2000
Posts: 27,921
Likes: 1,080
From: where the weather suits my clothes
Originally Posted by PDX3.2TL
Oh, if you didn't think that 19"x8.5" with a +45 offset wouldn't work, here you go.
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
#12
Originally Posted by NSXNEXT
The clearance from stut housing to the inside of the wheel will be 15mm LESS
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
#24
Originally Posted by NSXNEXT
The clearance from stut housing to the inside of the wheel will be 15mm LESS
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
#25
RIGHT ON!
Your wheels look sweet!
I love this forum... but if we listened to these guys telling us that 19x8.5 wouldn't fit I'd still be rolling on my stocks.
By the way how you find out that 8.5's would fit?
Your wheels look sweet!
I love this forum... but if we listened to these guys telling us that 19x8.5 wouldn't fit I'd still be rolling on my stocks.
By the way how you find out that 8.5's would fit?
#30
Originally Posted by boku
RIGHT ON!
Your wheels look sweet!
I love this forum... but if we listened to these guys telling us that 19x8.5 wouldn't fit I'd still be rolling on my stocks.
By the way how you find out that 8.5's would fit?
Your wheels look sweet!
I love this forum... but if we listened to these guys telling us that 19x8.5 wouldn't fit I'd still be rolling on my stocks.
By the way how you find out that 8.5's would fit?
#33
Originally Posted by NSXNEXT
The clearance from stut housing to the inside of the wheel will be 15mm LESS
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
The outside edge of the wheel will EXTEND an extra 35mm (1 3/8")
If you say so.
#34
Originally Posted by joseph_99tl
he may not rub in the fender wells...
but look at the corner of his front lip...
scraaape...
but look at the corner of his front lip...
scraaape...
#36
Originally Posted by PDX3.2TL
I did however roll the fenders in the back and cut tabs, but that is beside the point. There are too many people who THINK that the 19"x8.5" +45 won't work when it will... You will have about a 1/4" tops lip in the front, but the back is tucked. Keep in mind that I am running 225/35/19 rubbers.
#38
Originally Posted by patrick
Any size of wheel will fit if you roll the fenders and cut the tabs. Heck, I can go with +42 or lower offset wheel, and have custom flared wheelwells if I want to make the wheels fit. The whole point of getting proper offset wheels in the first place is so that you don't have to roll the fenders or cut the tabs. IMHO, rolling the fenders or cutting the tabs is not the right way to make a wheel fit your car. And I can safely bet that if you didn't roll your fenders or cut your tab, you will rub.
#39
Originally Posted by patrick
Any size of wheel will fit if you roll the fenders and cut the tabs. Heck, I can go with +42 or lower offset wheel, and have custom flared wheelwells if I want to make the wheels fit. The whole point of getting proper offset wheels in the first place is so that you don't have to roll the fenders or cut the tabs. IMHO, rolling the fenders or cutting the tabs is not the right way to make a wheel fit your car. And I can safely bet that if you didn't roll your fenders or cut your tab, you will rub.
Any size of wheel will fit if you roll the fenders and cut the tabs. Heck, I can go with +42 or lower offset wheel, and have custom flared wheelwells if I want to make the wheels fit. The whole point of getting proper offset wheels in the first place is so that you don't have to roll the fenders or cut the tabs. IMHO, rolling the fenders or cutting the tabs is not the right way to make a wheel fit your car. And I can safely bet that if you didn't roll your fenders or cut your tab, you will rub.
WRONG!
Rolling fenders IS NOT fairing them. Rolling your fenders is when you use a roller to pull the inside of the fender towards the outer side while not augmenting the look of the outside of the car. On the TL If you feel the inner side of the fender you will notice a .5" lip that is what is rolled and that is what gives you the room to go with a bigger wheel.
P.S.
Don't post just for the sake of posting. Know at least a little about what you're talking about or just ask it as a question.
Late
#40
Originally Posted by boku
WRONG!
Rolling fenders IS NOT fairing them. Rolling your fenders is when you use a roller to pull the inside of the fender towards the outer side while not augmenting the look of the outside of the car. On the TL If you feel the inner side of the fender you will notice a .5" lip that is what is rolled and that is what gives you the room to go with a bigger wheel.
P.S.
Don't post just for the sake of posting. Know at least a little about what you're talking about or just ask it as a question.
Late
Rolling fenders IS NOT fairing them. Rolling your fenders is when you use a roller to pull the inside of the fender towards the outer side while not augmenting the look of the outside of the car. On the TL If you feel the inner side of the fender you will notice a .5" lip that is what is rolled and that is what gives you the room to go with a bigger wheel.
P.S.
Don't post just for the sake of posting. Know at least a little about what you're talking about or just ask it as a question.
Late