98-02 accord parts on our cars
#1
98-02 accord parts on our cars
I have accord springs on my car, but what I'm wondering is, would strut bars and other suspension parts swap in as well? I"m not sure if it was just the springs or is it all suspension parts. If someone can help clear that up for me. thanks
#2
Safety Car
iTrader: (5)
most suspension parts will work.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
#5
Originally Posted by InspireTL
most suspension parts will work.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
#7
Low & Slow w/Dubz On My
Join Date: Jan 2008
Location: MIL-TOWN, WI
Age: 42
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InspireTL
most suspension parts will work.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
I have front and rear camber kit, springs, shocks, sways, strutbars, and lower tiebars and they all fit the 98-02 V6 accord.
I think even the rotors and brake components fit the accord.
The exhaust would fit but would need some modifications.
Other than that I can't think of anything else.
as far as the springs go, is there a certain model# i should look out for or would jus any spring fit?..
Trending Topics
#8
Safety Car
iTrader: (5)
Originally Posted by jaycohh
i was thinking about getting new strutbar and or sways..how big of an improvment did they make? is it worth it?
Originally Posted by ZEUS'O3TL
as far as the springs go, is there a certain model# i should look out for or would jus any spring fit?..
I'm running Neuspeed springs made specifically for the accord...looks great and feels great.
Which springs are you looking for?
#10
Low & Slow w/Dubz On My
Join Date: Jan 2008
Location: MIL-TOWN, WI
Age: 42
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
[/QUOTE]Which springs are you looking for?[/QUOTE]
im not sure yet...i don't wanna go to low becuz my 19" Roja_s are 19x8 +40 offset and the rear looks like i will be rubbing...i only wanna do about 1.5 tops.
im not sure yet...i don't wanna go to low becuz my 19" Roja_s are 19x8 +40 offset and the rear looks like i will be rubbing...i only wanna do about 1.5 tops.
#12
What your problem is?
Originally Posted by ZEUS'O3TL
as far as the springs go, is there a certain model# i should look out for or would jus any spring fit?..
#13
Low & Slow w/Dubz On My
Join Date: Jan 2008
Location: MIL-TOWN, WI
Age: 42
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by indoMFP
be careful about the rear springs... the rears of our cars are heavier and thus if you use the accord springs in the rear, the vehicle will sag... that is why H&R came out with different springs for the TL. The front springs were the same, but the rears are different... someone with H&R could be of better help...
I was actually thinkin of just using the front lowering springs and leave the back alone since it sits pretty good in the back already....
#16
Senior Moderator
#17
Advanced
Join Date: Dec 2006
Location: Franklin, NC
Age: 39
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
well i have a full comptech cat back and find the mufflers a little small. i have tanabe medallion tourings on my IS350 and love the design of the muffler. and i know they make a set for the V6 accord. i was gonna try to pair it with my comptech centerpipe. and maybe use the comptech mufflers for my teggy or something. think the v6 accord axlebacks will fit?
Thread
Thread Starter
Forum
Replies
Last Post
handsom-hustla
Car Parts for Sale
70
11-13-2015 05:04 PM