Tint causes distortion and glares on rear window?
#1
Sticky Rice OwnZ joO
Thread Starter
Join Date: Jan 2001
Location: Bay Area & Sacramento, Cali
Age: 47
Posts: 4,246
Likes: 0
Received 1 Like
on
1 Post
Tint causes distortion and glares on rear window?
Ok, so I got my car tinted this past weekend.. What I was wondering was for those who also had their car tinted..
Do you have a glare on your rear window? When cars have their headlights on behind you, do you see ghost headlights where the defroster line are?? I have all hopes that they will go away once the tint has a chance to dry but I am not sure it will.. those with experience, please advise.
Also, I have noticed that the tint is kinda distoring the view, kinda like if you were looking through textured glass.. it appears to be little bubbles of water or something like that.. they seem to be going away but I don't know if this is something I should worry about or not..
Any ideas? Or am I just too picky?
------------------
June 10, 11AM - N. Cali / Bay Area Meet - Click Here!
<A HREF="http://www.geocities.com/phanthavong/mytl.html" TARGET=_blank>
</A>2001 SSM. 02 tails, 02 vent trim, burlwood knob. 32% Madico Onyx tint all around.
Mods? What mods? I can't afford mods, I'm getting married!!
Vin says 2001, but it's really a 2000 with an upgraded cupholder!!
Do you have a glare on your rear window? When cars have their headlights on behind you, do you see ghost headlights where the defroster line are?? I have all hopes that they will go away once the tint has a chance to dry but I am not sure it will.. those with experience, please advise.
Also, I have noticed that the tint is kinda distoring the view, kinda like if you were looking through textured glass.. it appears to be little bubbles of water or something like that.. they seem to be going away but I don't know if this is something I should worry about or not..
Any ideas? Or am I just too picky?
------------------
June 10, 11AM - N. Cali / Bay Area Meet - Click Here!
<A HREF="http://www.geocities.com/phanthavong/mytl.html" TARGET=_blank>
</A>2001 SSM. 02 tails, 02 vent trim, burlwood knob. 32% Madico Onyx tint all around.
Mods? What mods? I can't afford mods, I'm getting married!!
Vin says 2001, but it's really a 2000 with an upgraded cupholder!!
#2
Three Wheelin'
Join Date: Apr 2000
Location: toronto
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
give it a week. all the problems you described should go away
the only permanent problem is the visible stripes on the rear window. they use 2 or 3 peices of tint, and on sunny days you will see the overlapping points. no big deal though
but yeah, your ok
------------------
Follow as i ride
99 Satin Silver
Bridgestone RE-730 225/55/16
oem kit
ctech exhaust
ctech sways
aem intake
system
the only permanent problem is the visible stripes on the rear window. they use 2 or 3 peices of tint, and on sunny days you will see the overlapping points. no big deal though
but yeah, your ok
------------------
Follow as i ride
99 Satin Silver
Bridgestone RE-730 225/55/16
oem kit
ctech exhaust
ctech sways
aem intake
system
#3
Ya when I did my windows, the Tint guy said give it a good week at least before all the moisture between the tint & Glass dries and seals prooperly before it starts to be clear -- until then it'll be hazy... and if its humid where u are (like it was here in ny yesterday UGGHHHH) it'll take a bit longer
#5
Lead Footed
I had mine done a week ago today. It's looking better.
BTW - My read window was done in one piece. It was also recommended to let the car set out in the sun for the first couple of days to help with the process.
BTW - My read window was done in one piece. It was also recommended to let the car set out in the sun for the first couple of days to help with the process.
#6
Banned
Join Date: Jan 2001
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mr tl:
give it a week. all the problems you described should go away
the only permanent problem is the visible stripes on the rear window. they use 2 or 3 peices of tint, and on sunny days you will see the overlapping points. no big deal though
but yeah, your ok
give it a week. all the problems you described should go away
the only permanent problem is the visible stripes on the rear window. they use 2 or 3 peices of tint, and on sunny days you will see the overlapping points. no big deal though
but yeah, your ok
------------------
01' Acura Nighthawk Black Pearl Non-nav.
Mods on:
-Comptech springs
-WW flush mount spoiler
-More to come....
#7
Burning Brakes
Join Date: Oct 2000
Location: Fresno, CA
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Edub-TL:
Ok, so I got my car tinted this past weekend.. What I was wondering was for those who also had their car tinted..
Do you have a glare on your rear window? When cars have their headlights on behind you, do you see ghost headlights where the defroster line are?? I have all hopes that they will go away once the tint has a chance to dry but I am not sure it will.. those with experience, please advise.
Also, I have noticed that the tint is kinda distoring the view, kinda like if you were looking through textured glass.. it appears to be little bubbles of water or something like that.. they seem to be going away but I don't know if this is something I should worry about or not..
Any ideas? Or am I just too picky?
Ok, so I got my car tinted this past weekend.. What I was wondering was for those who also had their car tinted..
Do you have a glare on your rear window? When cars have their headlights on behind you, do you see ghost headlights where the defroster line are?? I have all hopes that they will go away once the tint has a chance to dry but I am not sure it will.. those with experience, please advise.
Also, I have noticed that the tint is kinda distoring the view, kinda like if you were looking through textured glass.. it appears to be little bubbles of water or something like that.. they seem to be going away but I don't know if this is something I should worry about or not..
Any ideas? Or am I just too picky?
------------------
2001 Acura 3.2TL Non-Navi
Satin Silver
FormulaOne Premier 35
(Metalized 35% Tint)
Trending Topics
#8
Sticky Rice OwnZ joO
Thread Starter
Join Date: Jan 2001
Location: Bay Area & Sacramento, Cali
Age: 47
Posts: 4,246
Likes: 0
Received 1 Like
on
1 Post
Originally posted by mr tl:
its very rare when a tinter has the skill to use one peice on a curved surface. they have to heat shrink it.
its very rare when a tinter has the skill to use one peice on a curved surface. they have to heat shrink it.
And I know they used heat shrink because there was a Bimmer there just being finished and they were taking out the little bubbles with a heatsink gun.. pretty cool...
I guess I was being anal again.. but you know how it is when it comes to your car..
Thanks everyone for "clearing" that up for me.
#11
I've had my metallic tint (formula one) for about a month and I still see PLENTY of ghost headlights at night where the defroster lines are. I am wondering whether I should take it back to the installer.
#12
I was told that mine was done in 1 piece.
I just wish they could explain the seem in the middle of the window I can see sometimes...
That's ok though, at least they tinted over the WHOLE window including the grain part at the top. A lot of places won't do that.
------------------
<A HREF="http://www.adamoski.com/acura.html" TARGET=_blank> </A>
I just wish they could explain the seem in the middle of the window I can see sometimes...
That's ok though, at least they tinted over the WHOLE window including the grain part at the top. A lot of places won't do that.
------------------
<A HREF="http://www.adamoski.com/acura.html" TARGET=_blank> </A>
#13
I was wondering about that part on the top. mine wasnt done because they said it would peel off in the future and all other hondas/acuras ive seen with that part tinted have have been peeling off. looks crappy but I'm glad they didnt tint it
#14
Guest
Posts: n/a
In addition to the distortions in the rear window due to the tint, I've noticed that my view to the drivers side mirror is distorted. My dealer put the tint on before I bought the car last weekend, so I don't know if the view was distorted prior. Anyone else notice that?
Otherwise, LOVE this car.
Otherwise, LOVE this car.
#15
OG
I think most, if not all tint shops do one piece for rear windows now.
------------------
Honda-Acura.net TL Forum Moderator.
1999 Silver with factory body kit, spoiler and burlwood instrument cluster and shift knob. Joshua Tree Wood dash kit. Hella air horns. Tint all around. Razo competition pedals. MOMO Sport 18"X7.5" with 225/40ZR Pirelli P7000SS. Weapon-R intake. Comptech springs, exhaust and headers. Inspire Tailights, homemade ram-air and Polarg M-12 front turn signals. Comptech front and rear sway bar. Axxis Metal Master front and rear pads. Mugen front grille. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
My AcuraTL Homepage
NEW: '01 Acura MDX Silver Premium
Front 35% tinted windows. Running boards. Roof rack. Tailgate deflector. Moonroof visor. Rear mud guards. Razo premium white headlight bulbs. PIAA yellow plasma ion fog bulbs. More to come later......
------------------
Honda-Acura.net TL Forum Moderator.
1999 Silver with factory body kit, spoiler and burlwood instrument cluster and shift knob. Joshua Tree Wood dash kit. Hella air horns. Tint all around. Razo competition pedals. MOMO Sport 18"X7.5" with 225/40ZR Pirelli P7000SS. Weapon-R intake. Comptech springs, exhaust and headers. Inspire Tailights, homemade ram-air and Polarg M-12 front turn signals. Comptech front and rear sway bar. Axxis Metal Master front and rear pads. Mugen front grille. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
My AcuraTL Homepage
NEW: '01 Acura MDX Silver Premium
Front 35% tinted windows. Running boards. Roof rack. Tailgate deflector. Moonroof visor. Rear mud guards. Razo premium white headlight bulbs. PIAA yellow plasma ion fog bulbs. More to come later......
#16
Three Wheelin'
Join Date: Sep 2000
Location: NEW YORK
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
I just got my tint done 2 weeks ago and they tinted the back window using 1 piece of tint. Also he went all the way to the top and covered the little black dots and he even tinted behind the 3rd brake light.
The guy who tinted my car did an AWESOME job on the area with the little black dots. It stuck perfectly! Ask Shoofin b/c he saw my car monday night.
------------------
Tom
2001 Nighthawk Black Pearl TL
Comptech springs,Xephyr,Performance CAI, Inspire tailights,Piaa super white 001 solitare fogs, Inspire fog switch,Burlwood shift knob,Piaa Xtreme white blinkers,Razo carbon fiber pedals,BEL 870 radar detector, Acura-TL.com sticker
The guy who tinted my car did an AWESOME job on the area with the little black dots. It stuck perfectly! Ask Shoofin b/c he saw my car monday night.
------------------
Tom
2001 Nighthawk Black Pearl TL
Comptech springs,Xephyr,Performance CAI, Inspire tailights,Piaa super white 001 solitare fogs, Inspire fog switch,Burlwood shift knob,Piaa Xtreme white blinkers,Razo carbon fiber pedals,BEL 870 radar detector, Acura-TL.com sticker
#17
Pro
Join Date: Nov 2000
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
the guys who did my tint do alot of honda and acuras for the bay area dealers. I mentioned the black dots to them and they said that there are a few windows where the tint just wont hold to that area.
Mine was done in one piece, and after the moisture dried up, its been great. Mines been on since October 98 and only recently have i seen really small lines near the defrost lines, cannot be seen when driving so no big deal.
------------------
1999 Satin Silver TL Dunlop SP9000 215-45/17-mounted on CL-S 17" Rims
H&R Springs-Axiss MetalMasterPads-Crossdrilled Rotors
-Inspire Tailights-20/30/40 tint
2000 S2000 Honda Roadster
- Mingster Aeroscreen, Smokin Front mesh Grill, Clear Sidemarkers...
Mine was done in one piece, and after the moisture dried up, its been great. Mines been on since October 98 and only recently have i seen really small lines near the defrost lines, cannot be seen when driving so no big deal.
------------------
1999 Satin Silver TL Dunlop SP9000 215-45/17-mounted on CL-S 17" Rims
H&R Springs-Axiss MetalMasterPads-Crossdrilled Rotors
-Inspire Tailights-20/30/40 tint
2000 S2000 Honda Roadster
- Mingster Aeroscreen, Smokin Front mesh Grill, Clear Sidemarkers...
#18
Drifting
Join Date: Aug 2000
Location: Torrance, CA
Posts: 2,120
Likes: 0
Received 0 Likes
on
0 Posts
Don't open/close windows until the film completely sticks to the window panes. Otherwise, they will start peeling off.
------------------
Y2K SiLVeR TL, non-navi
SLVR TL Homepage Last updated 6/9/01
------------------
Y2K SiLVeR TL, non-navi
SLVR TL Homepage Last updated 6/9/01
#19
Three Wheelin'
Join Date: Apr 2000
Location: toronto
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CBS:
They used 2-3 strips for your back window? They used only 1 on mine.
They used 2-3 strips for your back window? They used only 1 on mine.
its very rare when a tinter has the skill to use one peice on a curved surface. they have to heat shrink it.
i doubt one peice was used
#20
Oracle Apps/Database Dude
Give it 2 weeks. Park it in the sun. It will help in the curing process. Mine looks great until TLinKC tells me of a bubble I have in the Driver's side window. Now I see it all the time. damm..
2001TL Black/black Navigation,
Spoilers, 26 piece wood-trim,
Wood knob, Splash guards,
35% Smoked Tint,
Removed A C U R A
Removed 3.2TL
Just black chrome logo & Jayhawk Licence Plate.
2001TL Black/black Navigation,
Spoilers, 26 piece wood-trim,
Wood knob, Splash guards,
35% Smoked Tint,
Removed A C U R A
Removed 3.2TL
Just black chrome logo & Jayhawk Licence Plate.
#21
Racer
Join Date: Nov 2000
Location: NYC
Age: 45
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
yep, yep, mine was done in one piece also. it's been a couple of weeks now, and it looks great. jack taravella is the guy who did it, great guy! he used a heat gun to shape the rear window.
------------------
96 Lexus LS400
2002 Satin Silver TL-S W/Nav
------------------
96 Lexus LS400
2002 Satin Silver TL-S W/Nav
- Ebony interior wood kit
- Ebony wood/leather steering wheel
- 20% tint
- Boston Acoustic speakers+tweeters
- Kenwood 12" tube
- OEM Body Kit
#22
Three Wheelin'
Join Date: Dec 2000
Location: Nothern VA
Posts: 1,444
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GTL2K:
I've had my metallic tint (formula one) for about a month and I still see PLENTY of ghost headlights at night where the defroster lines are. I am wondering whether I should take it back to the installer.
I've had my metallic tint (formula one) for about a month and I still see PLENTY of ghost headlights at night where the defroster lines are. I am wondering whether I should take it back to the installer.
Thread
Thread Starter
Forum
Replies
Last Post
TLDude876
Car Talk
134
12-28-2016 03:18 PM
BoricuaTL
Car Parts for Sale
138
04-08-2016 01:08 PM