How many watts does the stock amp push on the 1st and 2nd gen TLs? Also feedback on this setup:

Rockford HPC 1369 (100s 6/9) in the back
Rockford FRC 1206 (50s 6.5) in the front

 

I'm trying to figure out how many watts I'll need to push that, If I could rewire the stock to push the two 50's in the front and get an 200 a.2 to push the 6x9's. Please advise...

 

first off which gen is your car?
the 2nd gen i know for sure it does use 6x9 anywhere in the setup.. you can probaly used the 6.5 on all 4 speakers the rear speakers are in the door
the first gen i have no idea...
p.s. they are goin to move this post to audio so check over there....

 

Mine's a 1st, but my friend's a second. We're doing both.

 

did you check in the audio installation forum/and 1st gen forum, they get em all there, i saw pics for installing speakers in the 2nd gen at the audio, hope this helps!

 

Where is are Stock Amp Located and if we hook up another amp there will it affect anything