I am installing a subwoofer and my rear bottom cushion wont come out. I flipped it up but there something in the middle of the seat holding it in. what is it and how did you guys take the seat out...

 

There's one more nut that's holding the bottom seat in. If I'm not mistaken it's off center...a little to the drivers side. Try and stick you hand in first to find it.

 

thank u do u know the size of it.

 

Sorry ...I don't remember. Good luck.

 

well thanx anyways

and there are 4 bolts for the rear cushion correct

 

Can someone help I tried again today to take the bottom cushion out and it came out from the 2 clips but theres still somethign there holding it in. I cant find what it is. How did everyone else take the seat out..

 

just get a flash light and pull the back support cushion and the bottom cushion apart where they both meet, near the middle but a little bit towards the driver side...and you should see one bolt holding both the bottom and the back support cusion together...once you take that out...the bottom comes off and there are 3 more bolts for the backsupport...

 

thank you so much.. ill try tommorow to pull it out.

 

it's a 10mm bolt