ClaraTypeS

OK first thing i thought is that it maybe the balance of the tires. I had recently JUST mounted new tires on my 01' CL-S and the damn thing is already shaking in the front but only when I accelerate. All the shit was done professionally. So its on them if the wheels weren't torqued or the wheels werent balanced properly. Lets say its none of that. I also dropped the shit out of my car with some Tien Basic coilovers. Could there be too much slack in the tie rod joints to where its spinning at an angle? Or does it sound like a bent axle in the front?

SIRSIG

wheel bearing???

https://acurazine.com/forums/showthread.php?t=188775

ClaraTypeS

It doesnt make a noise. You can just feel it.

o1s

mine did that. it was the axles starting to go bad.

rondog

iTrader: (1)

I had the same thing, they changed everything then found out it was just a bent control arm.

ClaraTypeS

Well i never did run into anything in my car. So there should be no Control Arm, Wheel Bering or Axel Damage. But there is possibility that things could be going bad. Now how would i INSPECT these problems? How would i know that i have a bent axle or damaged control arm. I couldnt be the wheel berings cuz that would make a lot of noise wouldnt it?

o1s

my wheelbearings sounded like i had huge mud tires on and sent vibrations through the floor, steering wheel and just about every panel in my car.

horsepowercrzy18

my friend had the same problem with his cl. he slammed his with tein coilovers and his shaked. it was the control arms pulling apart and soon enough bent