Rip tranny?

Thread Tools
 
Search this Thread
 
Old 06-14-2017 | 11:03 PM
  #1  
Tonepa's Avatar
Thread Starter
2nd Gear
 
Joined: Jun 2017
Posts: 2
Likes: 0
Question Rip tranny?

I have a 2003 acura cls 6-speed with 130k. In the past couple days ive noticed that the clutch hasnt been engaging properly. Now it wont move even move in gear , you can rev it too 4-5rpm it will barely move in any gear starting to smell like i was burning tranny so i stopped driving it. The car doesnt stall in gear either. Still shifts smooth and no grind. Cluth fluid is ok. What do you recommened?
Old 06-15-2017 | 06:41 AM
  #2  
zeta's Avatar
Suzuka Master
iTrader: (1)
 
Joined: Aug 2003
Posts: 5,933
Likes: 1,862
From: S. Florida
Originally Posted by Tonepa
I have a 2003 acura cls 6-speed with 130k. In the past couple days ive noticed that the clutch hasnt been engaging properly. Now it wont move even move in gear , you can rev it too 4-5rpm it will barely move in any gear starting to smell like i was burning tranny so i stopped driving it. The car doesnt stall in gear either. Still shifts smooth and no grind. Cluth fluid is ok. What do you recommened?
You might need a new clutch. Is the clutch currently on the car the original? Take the car and get it properly diagnosed. A new LUK clutch set 08047 and LUK DMF063 can be had for under $400 at rockauto.com.
Good Luck!
Old 06-15-2017 | 10:07 AM
  #3  
mattcl-s's Avatar
Banned
 
Joined: Mar 2014
Posts: 423
Likes: 36
From: st paul
While you get the clutch replaced do the rear main seal too really cheap part and the shop shouldn't charge extra labor to put it in, atleast at my shop the didn't
Old 06-16-2017 | 03:36 AM
  #4  
Tonepa's Avatar
Thread Starter
2nd Gear
 
Joined: Jun 2017
Posts: 2
Likes: 0
Cool thanks




All times are GMT -5. The time now is 12:55 AM.