Gnuts Pic Thread
#241
Whats up with RDX owners?
iTrader: (9)
Sadly, I dont know of any tricks to get the bolts out without drilling it. GL though.
#242
Three Wheelin'
iTrader: (7)
same thought as civic said. drilling out.
I saw a lot of people who have ct ice box on their car have that problem. That's why I didn't install ice box when i installed my sc. Hell, 2 of them were already fucked up. so I just modified my AEM cai to fit. and i love it!!!
I saw a lot of people who have ct ice box on their car have that problem. That's why I didn't install ice box when i installed my sc. Hell, 2 of them were already fucked up. so I just modified my AEM cai to fit. and i love it!!!
#243
3.5 psi
Thread Starter
iTrader: (1)
ya i'll have to drill them out and just put in some regular screws.
I have a outlaw thermo spacer kit (intake manifold and throttle body) and i want to put them on to keep temps down. I know where i have to put the manifold one, but the TB one i could put either where the TB is located near the battery OR right on the neck of the intake manifold right? (i'm s/c'ed). Which spot would be better? Do you still need oem gaskets or do these act as a gasket also?
I have a outlaw thermo spacer kit (intake manifold and throttle body) and i want to put them on to keep temps down. I know where i have to put the manifold one, but the TB one i could put either where the TB is located near the battery OR right on the neck of the intake manifold right? (i'm s/c'ed). Which spot would be better? Do you still need oem gaskets or do these act as a gasket also?
#245
Whats up with RDX owners?
iTrader: (9)
Id put it on the blower neck to manifold connection. No need for OEM gaskets when using these, unless you want to.
#248
I tried searching for people having issues with p2r spacers, and found nothing but what you've said negatively. I would think if there really were issues more people would be complaining.
#249
3.5 psi
Thread Starter
iTrader: (1)
I actually just received the package like 15 min ago. I'm not sure when i'll put it on. I think i'd like to do the HBP, upgrade injectors (they're noisy anyways) and tune with emanage all at once. So i might wait and do it next spring.
I also want to address my exhaust - stock cat and bpipe . I'd like to get a high flow cat and 3" b-pipe.
I also want to address my exhaust - stock cat and bpipe . I'd like to get a high flow cat and 3" b-pipe.
#250
Whats up with RDX owners?
iTrader: (9)
I threw mine out because they did the same thing. Didnt complain because I really didnt care. I dont know if they even made a real difference.
#252
Whats up with RDX owners?
iTrader: (9)
You should really be 3" if boosted.
#254
Whats up with RDX owners?
iTrader: (9)
Since you just got the parts, just get a cutout.
#255
3.5 psi
Thread Starter
iTrader: (1)
i was thinking of doing a 2.5 in/out cat then transition into 3" until the Y split. I'm really torn on what cat to use though.
I found some 94 octane gas early last week and the car has been running quite rich since then. Maybe i should go back to Shell 91?? Should the car adjust to the higher octane eventually?
I found some 94 octane gas early last week and the car has been running quite rich since then. Maybe i should go back to Shell 91?? Should the car adjust to the higher octane eventually?
#256
Suzuka Master
iTrader: (8)
i was thinking of doing a 2.5 in/out cat then transition into 3" until the Y split. I'm really torn on what cat to use though.
I found some 94 octane gas early last week and the car has been running quite rich since then. Maybe i should go back to Shell 91?? Should the car adjust to the higher octane eventually?
I found some 94 octane gas early last week and the car has been running quite rich since then. Maybe i should go back to Shell 91?? Should the car adjust to the higher octane eventually?
#258
Suzuka Master
iTrader: (8)
I think it should be better to go 3" after cat but what if you decide 3" custom collector sometime in the future ? But u right i will do this was 2.5" cat and then 3" easier for me and it should be fine. I dont know why he was "stupid" that might be something from past before i got on AZ.
#259
Whats up with RDX owners?
iTrader: (9)
Most of his stupidity was on v 6 p but he was banned here too. He liked to talk shit about everyones engine build, tried to keep his mods a secret (Paul divulged all the build info because nupe was being a dick), then when he blew his engine tried blaming Paul (even though he didnt break it in and beat the hell out of it). The guy was a tool.
#262
Whats up with RDX owners?
iTrader: (9)
How rich are you running?
#265
3.5 psi
Thread Starter
iTrader: (1)
i only have a crappy sweeper a/f. I think first i need a better wideband that shows the actual value. Before it would read one or two bars into the Rich area max. Now it'll get nearly halfway into the Rich area. Only things i've done differently are:
-went from 91 to 94 gas
-use some fuel injector cleaner
-cleaned my air filter
-went from 91 to 94 gas
-use some fuel injector cleaner
-cleaned my air filter
#266
03 acura cl type s
iTrader: (1)
IMO aem is the most accurate on the market same for goes for boost . I don't see why some of us are running cats anyway ? The only thing I can think of is your cat going bad.I'll run a strait pipe & O2 Spacer . If your still running rich checkout your plugs. And any thing after 93 octane is a waist of $ I once used race gas in Md.$8 per gallon I think it was 104 OCtain there was no difference . + High OCtain won't do anything UNLESS TUNED for it
Last edited by rush; 08-03-2011 at 08:08 AM. Reason: Adding
#267
3.5 psi
Thread Starter
iTrader: (1)
i'm looking into a new wideband now. And for no cat....well it's illegal here. We get tested every other year, so it would be just a pain. I want to get a high flow cat. I only used 94 because i couldn't find a shell near me. Plugs are about a year old.
#268
Whats up with RDX owners?
iTrader: (9)
The difference between 94 octane and 93 octane is negligible. I run 93 octane here without a problem. Im suspecting the fuel injector cleaner though.
#269
3.5 psi
Thread Starter
iTrader: (1)
ya i thought that maybe it cleaned some gunk off them and they could be spraying more fuel now as a result. I just thought the ECU would pick up on things like that and adjust.
#277
3.5 psi
Thread Starter
iTrader: (1)
lol, i'll have to go somewhere more scenic and take a few more shots. She's getting an oil change soon, then she's going to sleep for a few months.
I have so many projects planned. Painting the lips, need to wire in new ballasts & bulbs, i'm going to dinoc the interior and get rid of the silver bits, then in the spring i'm going to take a stab at removing the blower and doing a valve adjustment. Oh and hopefully a 3" exhaust and wire in a AEM wideband.
I have so many projects planned. Painting the lips, need to wire in new ballasts & bulbs, i'm going to dinoc the interior and get rid of the silver bits, then in the spring i'm going to take a stab at removing the blower and doing a valve adjustment. Oh and hopefully a 3" exhaust and wire in a AEM wideband.
#278
Whats up with RDX owners?
iTrader: (9)
Seriously, those half car shots are leaving me with blue balls. I need full body shots goddamnit!!
#280
03 acura cl type s
iTrader: (1)
Nice I'm so jealous right now all I'm missing is a lip but I think I'll do something difrent
http://i1119.photobucket.com/albums/...h/52d8566f.jpg
http://i1119.photobucket.com/albums/...h/52d8566f.jpg