6 speed final drive upgrade
Are there any final drives that can be used in our trannys like from the newer Accords? Or anything higher than our 3.2s? I saw a 3.8 but it's pricey
|
Originally Posted by Soseductivesf
(Post 15944714)
Are there any final drives that can be used in our trannys like from the newer Accords? Or anything higher than our 3.2s? I saw a 3.8 but it's pricey
https://plus.google.com/+AndrewThurmondBense https://acurazine.com/forums/members/bense-395111/ Good Luck! |
P2R has a 4.1 final drive, although it wasn't clear to me whether or not it'll fit our 2G models.
P2R J-Series 4.1 Final Drive |
Originally Posted by ProfessorFunk
(Post 16056227)
P2R has a 4.1 final drive, although it wasn't clear to me whether or not it'll fit our 2G models.
P2R J-Series 4.1 Final Drive Even if one where to purchase a new counter-shaft ($271.02) and oil pump gear ($48) online with the 4.1 Final Drive Bense Built offers ($1100), you would still save $330 over P2R's price.:shrug: That savings could be shifted over to the labor expense of the install. The savings increase even more if it is determined that a new counter-shaft and oil pump gear are not needed for those who may want to install this 4.1 into there manual transmission. That would still have to be determined/discussed with the transmission experts who would know, of course.:thumbsup: |
:popcorn:
|
:blink:
|
Damn, just when it was getting good lol
|
I got One that I'm going to install soon. https://cimg9.ibsrv.net/gimg/acurazi...ef6fb33c5d.png
|
Correction 3.9.
|
Originally Posted by Soseductivesf
(Post 16062226)
Correction 3.9.
So, you went with the BenseBuilt 3.9 final drive? If possible, don't forget to update your thread with your impressions when it's all done.:thumbsup: |
Final drive install should be finished by the end of this month. I also got some RL cams and a lwfw. |
Sorry guys I got screwed over big time. The good news is car is at a different shop and should be done by next week. Mods are 3.9 final drive, aasco lwfw, 75a motor mounts and RL cams. Already have comptech headers and pp intake manifold & runners with a 70mm tb and 4” intake |
Definitely makes a big difference however the speedometer is off by 8mph.
|
All times are GMT -5. The time now is 03:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands