The UPS Man Cometh
#42
I second Thin Jim's comments on the alternator pulley. Don't waste your time with the stock kit. I might even consider waiting for the IC kit and do it all at once,.... who am I kidding,... Install that bitch right now!
#43
Chap,
You must be one happy dude right now. Contrats on the new Arrival.
The 26th? That's two weeks away. I don't know how you're going to do it. How many boxes did that thing come in?
BTW - I'm hoping mine arrives today or tomorrow also. I'm not as organized as you and not going as far as you.
1) I've already got the tranny cooler in.
2) My Optima arrived yesterday
3) SC shipped yesterday and hopefully will arrive today or tomorrow.
4) Mugen mod parts are due in next week.
5) Not sure if I'm doing gauges. Want low profile.
You're lucky that the HBP is an easy option for you since you have good gas. I think you should go for the HBP
You must be one happy dude right now. Contrats on the new Arrival.
The 26th? That's two weeks away. I don't know how you're going to do it. How many boxes did that thing come in?
BTW - I'm hoping mine arrives today or tomorrow also. I'm not as organized as you and not going as far as you.
1) I've already got the tranny cooler in.
2) My Optima arrived yesterday
3) SC shipped yesterday and hopefully will arrive today or tomorrow.
4) Mugen mod parts are due in next week.
5) Not sure if I'm doing gauges. Want low profile.
You're lucky that the HBP is an easy option for you since you have good gas. I think you should go for the HBP
#44
Originally Posted by Allout
5) Not sure if I'm doing gauges. Want low profile.
As far as your lower octane fuel goes,... Scalbert's IC can help there,... don't give up, there's always HOPE! More Boost = More Fun!
#45
My Member is Registered
Joined: Oct 2003
Posts: 3,545
Likes: 2
From: 2678.51 miles east of California
Too cool. Best of luck to you sir. You should mod the car, tune it, dyno it and everything. Then look in the paper for some old used $10 tires. Finally, go to the track for the sole purpose of melting them off the rims in a 30 foot burn-out ;-)
#46
Congrats Chap.... you have me thinking again... cuz thats all the toys I am ordering... , cant wait to get my car back with the new tranny and see how it goes....... The dealer who was gonna get the SC for me has everything in stock.... It is so tempting...
Wish ya all the best with the install... give us an update once you get the blower installed
Wish ya all the best with the install... give us an update once you get the blower installed
#47
Originally Posted by ThinJim
If i might recommend something that will save you lots of aggravation in the future... Get the HBP before the install....Go with Wrinkle Paint. You can find it at speed shops made by VHT
I like the look of half black/silver blower on some CLs. I've got some time till the install so I might do that.
Originally Posted by Allout
The 26th? That's two weeks away. I don't know how you're going to do it. How many boxes did that thing come in?
It came in a total of 3 boxes. The biggest weighing about 59 lbs. and it contained the blower unit itself plus most of the small accessories.
The 2nd one was about 8 lbs. and contained the new radiator hose and Icebox Kit. (Which I already have)
3rd was about 2 lbs. and contained the new fan shroud.
When the UPS van pulled up I bolted out of the house and before he even got the blower box out of the truck I was standing at the back of the truck.
Let me know when yours arrives and what your plans are for install.
#50
Originally Posted by Pure Adrenaline
Hey, where did you get the pillar mount? Nobody makes one for the TL, so I'm gonna get the CL one and modify it a bit.
Also make sure you know which size gauge your gonna use.
http://www.gaugepods.com/acura.html
#52
It seems Comptech updated their kit to include with the ESM, 2 pairs of solder tubes. It also now says specifically in the instructions to solder all ESM connections.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
#53
Originally Posted by darrinb
u gotta hit the track before and after keith...
that blower goes good w/ the keychain
that blower goes good w/ the keychain
That key chain you hooked up was my first mod to date. Still holding up like new.
#54
Originally Posted by Chaptorial
It seems Comptech updated their kit to include with the ESM, 2 pairs of solder tubes. It also now says specifically in the instructions to solder all ESM connections.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
It's nice to see that CompTech does listen to their customers and improve their designs.
#56
Originally Posted by Chaptorial
I like the look of half black/silver blower on some CLs. I've got some time till the install so I might do that.
I do to. If you do paint it, let me know how you do it and how it comes out. I'm interested in painting the body black also but not sure what's involved.
Thanks for posting the Pics of your stuff. It's got me all wound up.
#58
Originally Posted by Allout
Chap,
You must be one happy dude right now. Contrats on the new Arrival.
The 26th? That's two weeks away. I don't know how you're going to do it. How many boxes did that thing come in?
BTW - I'm hoping mine arrives today or tomorrow also. I'm not as organized as you and not going as far as you.
1) I've already got the tranny cooler in.
2) My Optima arrived yesterday
3) SC shipped yesterday and hopefully will arrive today or tomorrow.
4) Mugen mod parts are due in next week.
5) Not sure if I'm doing gauges. Want low profile.
You're lucky that the HBP is an easy option for you since you have good gas. I think you should go for the HBP
You must be one happy dude right now. Contrats on the new Arrival.
The 26th? That's two weeks away. I don't know how you're going to do it. How many boxes did that thing come in?
BTW - I'm hoping mine arrives today or tomorrow also. I'm not as organized as you and not going as far as you.
1) I've already got the tranny cooler in.
2) My Optima arrived yesterday
3) SC shipped yesterday and hopefully will arrive today or tomorrow.
4) Mugen mod parts are due in next week.
5) Not sure if I'm doing gauges. Want low profile.
You're lucky that the HBP is an easy option for you since you have good gas. I think you should go for the HBP
#59
Originally Posted by Chaptorial
Good service etc. with these guys.
Also make sure you know which size gauge your gonna use.
http://www.gaugepods.com/acura.html
Also make sure you know which size gauge your gonna use.
http://www.gaugepods.com/acura.html
Gotta love a Company called " Low Tek "
How much are the actual gauges Chap ?
#60
Originally Posted by Chaptorial
It seems Comptech updated their kit to include with the ESM, 2 pairs of solder tubes. It also now says specifically in the instructions to solder all ESM connections.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
I'd imagine this in light of all the problems people originally had with the clips Comptech used to send in their kit.
Earlier S/C owner correct me if i'm wrong.
#63
Originally Posted by Allout
I do to. If you do paint it, let me know how you do it and how it comes out. I'm interested in painting the body black also but not sure what's involved.
Thanks for posting the Pics of your stuff. It's got me all wound up.
Thanks for posting the Pics of your stuff. It's got me all wound up.
#64
Originally Posted by Red Rider
What are the Mugen parts Jeff ?
Getting it through Dean at Speed Distributors.
http://www.acura-cl.com/forums/showthread.php?t=143706
#68
Originally Posted by Red Rider
How much are the actual gauges Chap ?
Originally Posted by Red Rider
Mine is Black and i love the look !!
Originally Posted by unsure
i guess we are looking at 13.6-13.7s w/the hbp and all the belts performing rite i.e. no slipping?
#71
Originally Posted by Chaptorial
I went with Full Sweep Electrical for both gauges and they ran about $200 a piece.
So it came like that from Comptech? :jealous:
That’s the plan. All on the stock rubber too. :o
So it came like that from Comptech? :jealous:
That’s the plan. All on the stock rubber too. :o
Yeah, my blower came that way, i like it !!
Get some sticky rubber Bro, Toyos would work nice
#72
Chap, I would hope for a better time than 13.6-13.7. I promise you my car will reach 13.99 NA. I just got my newly mapped unichip back and it runs AMAZING. Whatever they did with this map, they did right. It pulls extremely hard. Crank pulley goes on Monday
I doubt you'll even get a 13.7 though on stock tires. Once you switch to rubber that actually sticks to the ashpalt without erupting in a cloud of smoke, I bet you will do 13.5ish. unless you are amazingly easy and skilled with working your gas pedal off the line
I doubt you'll even get a 13.7 though on stock tires. Once you switch to rubber that actually sticks to the ashpalt without erupting in a cloud of smoke, I bet you will do 13.5ish. unless you are amazingly easy and skilled with working your gas pedal off the line
#73
13.5 would be great but i don't believe any S/C CL has it that yet. Time seem to vary a lot though. One guy ran with heavy ass 18's or 19's on and he still hit a 13.6 We'll have to wait and see what happens...
New rubber will come once Spring rolls around. I'll be on the stockers through fall and winter though.
New rubber will come once Spring rolls around. I'll be on the stockers through fall and winter though.
#76
Originally Posted by blader
Chap, I would hope for a better time than 13.6-13.7. I promise you my car will reach 13.99 NA. I just got my newly mapped unichip back and it runs AMAZING. Whatever they did with this map, they did right. It pulls extremely hard. Crank pulley goes on Monday
I doubt you'll even get a 13.7 though on stock tires. Once you switch to rubber that actually sticks to the ashpalt without erupting in a cloud of smoke, I bet you will do 13.5ish. unless you are amazingly easy and skilled with working your gas pedal off the line
I doubt you'll even get a 13.7 though on stock tires. Once you switch to rubber that actually sticks to the ashpalt without erupting in a cloud of smoke, I bet you will do 13.5ish. unless you are amazingly easy and skilled with working your gas pedal off the line
#77
congrats Keith!!!!!!!! I better see your ride on the upcoming nY meets!!
Damn, I want the SC so fucken bad, I am so ready to seell my beater (91 Integra GS) and my rims!! oh well we will have to see what the future brings us!
Damn, I want the SC so fucken bad, I am so ready to seell my beater (91 Integra GS) and my rims!! oh well we will have to see what the future brings us!