Sills on the way
#1
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Sills on the way
I just got off the phone with Jeff from AP-Signworks.com (Evolution Autodesign), and my sills with the S will be sent out tomorrow...wohoo!
#3
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
They're "slightly blemished." The cat e-mailed me pics and I couldn't tell where the scratches were. Now, the pic wasn't super-up-close, but it was alright. Plus, I'll scratch 'em here and there, I'm sure. $50 shipped, for the last set with the S.
#7
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by ABreece
They're still up on the site, i was just thinking about ordering some. What's this about them being discontinued?
They're still up on the site, i was just thinking about ordering some. What's this about them being discontinued?
Trending Topics
#9
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by Chaptorial
Bulldog how long ago did you order them? I ordered mine like 2 weeks ago and haven't heard anything yet.
Bulldog how long ago did you order them? I ordered mine like 2 weeks ago and haven't heard anything yet.
#10
Damn, I was going to order those blemished ones! I got some pics and you're right, you can't tell where the scratches are! I had the same thinking as you...that they will eventually get scratches here and there.
My only concern was how well they stuck in 120 degree weather (I live in Arizona).
My only concern was how well they stuck in 120 degree weather (I live in Arizona).
#11
What, me drive fast?
Join Date: Oct 2002
Location: North Andover, MA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
When I ordered mine, it took 2 weeks for them to get to me. I have the brushed aluminum without the red S and I love them so far. I didn't get the blemished ones...I figure that I might as well start perfect. If you decide to get the "perfect" ones, be sure to tell him that you are a member of the forum and you'll get a discount. No discount on the blemished ones though (at least when I called).
#12
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by blackmagiCL_S
When I ordered mine, it took 2 weeks for them to get to me. I have the brushed aluminum without the red S and I love them so far. I didn't get the blemished ones...I figure that I might as well start perfect. If you decide to get the "perfect" ones, be sure to tell him that you are a member of the forum and you'll get a discount. No discount on the blemished ones though (at least when I called).
When I ordered mine, it took 2 weeks for them to get to me. I have the brushed aluminum without the red S and I love them so far. I didn't get the blemished ones...I figure that I might as well start perfect. If you decide to get the "perfect" ones, be sure to tell him that you are a member of the forum and you'll get a discount. No discount on the blemished ones though (at least when I called).
#13
Sweet as Gold
This is BULLSHIT Bulldog , I ordered mine 1 month ago and never received anything . I called him like 4 times and left like 3 messages . He never returned any calls or sent any e-mails . I hope u have better luck than me > I sent u the pm w/ the price of the intake real soon .
#14
What, me drive fast?
Join Date: Oct 2002
Location: North Andover, MA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Bulldog, they come with double sided 3M tape already on the back. Just peel and press. The tape isn't positioned so that it fits on top of the ridges on the door "step" or in between or anything but they seem to stick and fit just fine.
#16
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by Ant7701
YOOOOOOOOOOOOOO , Jeff just called me and apologized , they are shipping them next thursday . Can't wait!!!
YOOOOOOOOOOOOOO , Jeff just called me and apologized , they are shipping them next thursday . Can't wait!!!
Sweet, I'll keep an eye out for it...Thanks, man!
I'm just spenin' like a fiend lately. Just bought a whole bunch of booze to stock up my little bar at home...mmm Captain
#17
What, me drive fast?
Join Date: Oct 2002
Location: North Andover, MA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Bulldog, you have to tell me (PM is fine) when you are working as a bartender. You said you are working in one of the W towns...Wilmington? My fiance' and I will drop by for a few.
Captains is nice...but I am a Bud man. Simple but it works!
Did you get a look at my sills when we met up at Wangs to do the header install? I think that you did. I'll have to see the ones with the red S to see if I should have gone for those.
Captains is nice...but I am a Bud man. Simple but it works!
Did you get a look at my sills when we met up at Wangs to do the header install? I think that you did. I'll have to see the ones with the red S to see if I should have gone for those.
#19
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by blackmagiCL_S
Bulldog, you have to tell me (PM is fine) when you are working as a bartender. You said you are working in one of the W towns...Wilmington? My fiance' and I will drop by for a few.
Captains is nice...but I am a Bud man. Simple but it works!
Did you get a look at my sills when we met up at Wangs to do the header install? I think that you did. I'll have to see the ones with the red S to see if I should have gone for those.
Bulldog, you have to tell me (PM is fine) when you are working as a bartender. You said you are working in one of the W towns...Wilmington? My fiance' and I will drop by for a few.
Captains is nice...but I am a Bud man. Simple but it works!
Did you get a look at my sills when we met up at Wangs to do the header install? I think that you did. I'll have to see the ones with the red S to see if I should have gone for those.
Yeah, I saw your sills...liked 'em, too.
Well, I've had the car 2 years, and started goin' to the track this past August, but Nashua told me about this forum in October, so it's really gotten outta hand since then.
#20
Bulldog nice mod you will not regret the purchase I have people asking me all the time about the sills. Too bad I didn't get the chrome ones with the red S I love those.
Remember to clean the area good with rubbing alcohol to get all oil and dirt out. Then if you want heat the tape up with a blowdryer to get it nice and sticky and make sure they are centered and last but not least take some pics of finished product
Later
Lou
Remember to clean the area good with rubbing alcohol to get all oil and dirt out. Then if you want heat the tape up with a blowdryer to get it nice and sticky and make sure they are centered and last but not least take some pics of finished product
Later
Lou
#21
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by lou
Bulldog nice mod you will not regret the purchase I have people asking me all the time about the sills. Too bad I didn't get the chrome ones with the red S I love those.
Remember to clean the area good with rubbing alcohol to get all oil and dirt out. Then if you want heat the tape up with a blowdryer to get it nice and sticky and make sure they are centered and last but not least take some pics of finished product
Later
Lou
Bulldog nice mod you will not regret the purchase I have people asking me all the time about the sills. Too bad I didn't get the chrome ones with the red S I love those.
Remember to clean the area good with rubbing alcohol to get all oil and dirt out. Then if you want heat the tape up with a blowdryer to get it nice and sticky and make sure they are centered and last but not least take some pics of finished product
Later
Lou
I don't have a digital camera yet (gonna "need" one for the track, though ), but I'll scan the pics and post 'em, anyway.
#22
What, me drive fast?
Join Date: Oct 2002
Location: North Andover, MA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
True...I used ammonia to clean off mine. Sorry, the alcohol in my place is for drinking not for cleaning. ;-)
I didn't bother with a hairdrier. I may regret that but I suppose that as long as I don't physically lose the sills I can always re-stick them. Heck, as Bulldog01 will attest to, it has reached "freeze your car off" out here way too often. I have "presed" on my sills at that temp (just to see what happens) and they do sound like Rice Krispies. But so far, no problem.
There was a person that lost one that just "slipped out of the door even though it was closed". Possible I guess but I am skeptical. He was bad mouthing a lot though so keep that in mind.
Take home message...clean the surface WELL! Press and play! Just like Lee Press on Sills! j/k
I didn't bother with a hairdrier. I may regret that but I suppose that as long as I don't physically lose the sills I can always re-stick them. Heck, as Bulldog01 will attest to, it has reached "freeze your car off" out here way too often. I have "presed" on my sills at that temp (just to see what happens) and they do sound like Rice Krispies. But so far, no problem.
There was a person that lost one that just "slipped out of the door even though it was closed". Possible I guess but I am skeptical. He was bad mouthing a lot though so keep that in mind.
Take home message...clean the surface WELL! Press and play! Just like Lee Press on Sills! j/k
#23
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by blackmagiCL_S
True...I used ammonia to clean off mine. Sorry, the alcohol in my place is for drinking not for cleaning. ;-)
I didn't bother with a hairdrier. I may regret that but I suppose that as long as I don't physically lose the sills I can always re-stick them. Heck, as Bulldog01 will attest to, it has reached "freeze your car off" out here way too often. I have "presed" on my sills at that temp (just to see what happens) and they do sound like Rice Krispies. But so far, no problem.
There was a person that lost one that just "slipped out of the door even though it was closed". Possible I guess but I am skeptical. He was bad mouthing a lot though so keep that in mind.
Take home message...clean the surface WELL! Press and play! Just like Lee Press on Sills! j/k
True...I used ammonia to clean off mine. Sorry, the alcohol in my place is for drinking not for cleaning. ;-)
I didn't bother with a hairdrier. I may regret that but I suppose that as long as I don't physically lose the sills I can always re-stick them. Heck, as Bulldog01 will attest to, it has reached "freeze your car off" out here way too often. I have "presed" on my sills at that temp (just to see what happens) and they do sound like Rice Krispies. But so far, no problem.
There was a person that lost one that just "slipped out of the door even though it was closed". Possible I guess but I am skeptical. He was bad mouthing a lot though so keep that in mind.
Take home message...clean the surface WELL! Press and play! Just like Lee Press on Sills! j/k
Yeah, it's been colder than...well, colder than F*CK in MA/NH this winter!
Lee Press-on-Sills...you killed it!
#24
What, me drive fast?
Join Date: Oct 2002
Location: North Andover, MA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Personally, as far as "I'm going to scratch them anyway" mentally, once you have them you don't ever touch them...even with your feet!!!! I wonder if you ever touch that area anyway? Unless you DRAG your foot over that part of the entry way I can't see it being a prob. I may sing a different song later but for now I am glad I got the "perfect" ones. As soon as I scratch them..I'll wish I saved the $20...or maybe it was $15. I got the pics of the "clearance" ones and I couldn't see the scratches through the fuzzy pic from a very low res camera.
#25
Certified Lurker
Join Date: Apr 2001
Location: East Hanover NJ
Age: 40
Posts: 1,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sills on the way
Originally posted by Bulldog01
I just got off the phone with Jeff from AP-Signworks.com (Evolution Autodesign), and my sills with the S will be sent out tomorrow...wohoo!
I just got off the phone with Jeff from AP-Signworks.com (Evolution Autodesign), and my sills with the S will be sent out tomorrow...wohoo!
#26
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Re: Re: Sills on the way
Originally posted by Collective27
Should i email them from the apsignworks email address at that site or the evolutionautodesign email address from that site?
Should i email them from the apsignworks email address at that site or the evolutionautodesign email address from that site?
The companies are related, I believe, but Jeff's e-mail is apsignworks.
#27
Certified Lurker
Join Date: Apr 2001
Location: East Hanover NJ
Age: 40
Posts: 1,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Re: Sills on the way
Originally posted by Bulldog01
apsignworks.
The companies are related, I believe, but Jeff's e-mail is apsignworks.
apsignworks.
The companies are related, I believe, but Jeff's e-mail is apsignworks.
#28
Masshole
Thread Starter
Join Date: Oct 2002
Location: #1 in all the land!!
Age: 51
Posts: 15,151
Likes: 0
Received 1 Like
on
1 Post
Re: Re: Re: Re: Sills on the way
Originally posted by Collective27
Ok thanks, ill email them prob tomorow or when i get a free minute.
Ok thanks, ill email them prob tomorow or when i get a free minute.
Just keep in mind that his communications may not be particularly prompt or immediate, but he'll follow through eventually.
Good luck!
#29
Changin bulbs since '73
iTrader: (1)
Join Date: Dec 2001
Location: Chi-town burbs
Age: 51
Posts: 8,111
Likes: 0
Received 12 Likes
on
4 Posts
i got mine a few weeks ago!! I am waiting for it to get warmer out before i put them on!!! I didn't get the red s because i have a parchment interior. I can't wait to put them on in a month or so!! Jeff was real cool. I got mine in like 2 weeks, right when he said i would.
Thread
Thread Starter
Forum
Replies
Last Post
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
BoricuaTL
Car Parts for Sale
138
04-08-2016 01:08 PM