Programming Question
Programming Question
Racer
Joined: Sep 2004
Posts: 299
Likes: 0
From: Morristown, NJ
To clear the codes press and hold the 1st and 3rd buttons until they start flashing rapidly.
if you have a garage that doesn't need to be "trained" meaning its older. just press button 1, then hold the garage door opener up to it and hold that button until the light flashes rapidly.
if you have a newer garage, you have to set the training button on the actual garage door unit to training mode...do the same press button 1 and garage door opener step. sometimes it takes 2-3 times before it takes.
i think there were a few good threads about this if you search
if you have a garage that doesn't need to be "trained" meaning its older. just press button 1, then hold the garage door opener up to it and hold that button until the light flashes rapidly.
if you have a newer garage, you have to set the training button on the actual garage door unit to training mode...do the same press button 1 and garage door opener step. sometimes it takes 2-3 times before it takes.
i think there were a few good threads about this if you search
2003 CL-S 6SPD
Joined: Apr 2006
Posts: 337
Likes: 0
From: Mississauga, Ontario
Sorry for an old bump of a thread, but i wanted to say thanks! Did a search about confign Homelink and i came across this post that worked for me! YaY! 
Again, just wanted to say thanks!
Again, just wanted to say thanks!
Originally Posted by rcz22
To clear the codes press and hold the 1st and 3rd buttons until they start flashing rapidly.
if you have a garage that doesn't need to be "trained" meaning its older. just press button 1, then hold the garage door opener up to it and hold that button until the light flashes rapidly.
if you have a newer garage, you have to set the training button on the actual garage door unit to training mode...do the same press button 1 and garage door opener step. sometimes it takes 2-3 times before it takes.
i think there were a few good threads about this if you search
if you have a garage that doesn't need to be "trained" meaning its older. just press button 1, then hold the garage door opener up to it and hold that button until the light flashes rapidly.
if you have a newer garage, you have to set the training button on the actual garage door unit to training mode...do the same press button 1 and garage door opener step. sometimes it takes 2-3 times before it takes.
i think there were a few good threads about this if you search
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
Nov 16, 2015 08:30 PM
joflewbyu2
5G TLX (2015-2020)
139
Oct 8, 2015 11:16 AM
navtool.com
1G RDX Audio, Bluetooth, Electronics & Navigation
1
Sep 25, 2015 05:15 PM