MikeS 18

Sometimes, when it is cold outside my seats do not act properly. Here is the scenario:

Car locked with seat in forward position because someone got out of the car when we last stopped; hit remote unlock button; open door, recline seat back to normal position; seat begins to slide back to memory position; I get into seat before it finishes and it either stops right there or sometimes tries to move forward. I hit the memory 1 button and it goes back where it is supposed to.

This seems broken. Please confirm and/or report on similar results. I'm confused!

------------------
CL-S #22,299 Black/Parchment/Nav, spoiler, door & fender guards, wood trim, PIAA 19169 & 9005, V1 w/remote, trunk & winter mats, no headers, no sway bars, no springs, no money!

louisn

I think it's probably the safety deal which stops the seat from moving back when it hits an obstruction if you access the backseat with the auto deal on the side of the seat. I couldn't get mine to do it unless the front seat was down to gain access to the back. I also assume you are using the memory 1 remote. Also, I weigh about 165. If you're much bigger I guess it might have some effect.

Boeing747

that happens to me also -if you sit in the seat before it stops moving to its memory position, it stops.

kensteele

If the seats hits something while moving or if you jump into it hard while it is moving, it will stop. You can slide into it [b]gently[b] while it's moving without stopping it.

However, in the past 11 months, I have had 3 instances where the memory seat suffered from temporary amnesia. Neither the door button nor the remote could jog the seat's memory. I had to manually position the seat. The next time I got in (later that day), it remembered.

------------------
* 2001 Acura CL Type S * Blk/Blk * Navigator * Spoiler * Moonroof Visor * V1 *
* Since 3/31/2000 *
* Road Warrior *

* 500 posts on h/a.net *** 400 posts "insane poster" on the "old" acura-cl.com *

MikeS 18

Okay, I feel better. This is exactly what I am experiencing. I guess that I am too impatient and Louis, are you suggesting I am overweght? j/k

Thanks guys.

------------------
CL-S #22,299 Black/Parchment/Nav, spoiler, door & fender guards, wood trim, PIAA 19169 & 9005, V1 w/remote, trunk & winter mats, no headers, no sway bars, no springs, no money!

Nashua_Night_Hawk

My seat is squeaking and cipping and give annoying noise when M2 (exit position) is used.... It may need to be greased or the rails get cleaned.....

------------------
Bare Bone Stock Type-S. Plenty of accessories. PIAA 19169 to be installed soon.

MikeS 18

Passenger side is doing this. I think I'll spray some silicon on a rag and wipe the rails down to see if that helps. I also have a small crack which appears to be appearing on the driver seat. I may not need to clean the seat after all - if it really cracks I will take it to the dealer.



------------------
CL-S #22,299 Black/Parchment/Nav, spoiler, door & fender guards, wood trim, PIAA 19169 & 9005, V1 w/remote, trunk & winter mats, no headers, no sway bars, no springs, no money!