gaping46and2

iTrader: (2)

The license plate bulb is as easy as taking the old bulb out and putting a new #194 LED bulb in, same with the map lights, door courtesy lights, and the dome light.

Presto

Thats what I like to hear, people who have done the map lights or door courtesy or dome do you like them? I have a SMR, maybe red LED's would accent it nicely, thanks for the reply!

gaping46and2

iTrader: (2)

I have all the bulbs converted to LEDs, and I like them pretty well. At first I wasn't sure I liked the dome light being an LED, but I got used to it. Plus I didn't think it would flow very well with all but the dome light being an LED.

LIPPSTUH

iTrader: (2)

where did u order from presto?

imma replace all my lights soon, it'll look so sexy at night.

HondaVtec21

I'm about to order all new bulbs from Superbrightleds.com but Just wanted to know if you ordered the standard (white) color, or Blue. . . At first I was just going to replace the license plate bulb, but I got the $$, so why not do em' all at once!!!

_Also, Did you use the 5 LED bulbs for everything, or all different ones for the doors/map light/dome light/license plate. . .?

Thanks Alot!~

Dirty Type-S

i wanna change the interior lights too liek that one gy.. can the guy chime in to how he did it all... i,e, speedometer, and ac knob and stuff all them were blue....

im geting my LED tag lights soon too....

gaping46and2

iTrader: (2)

For the door courtesy lights, the glove box, center console, and the license plate I used the 5-LED bulb from superbrightleds.com. For the map lights, I found the 5-LED bulb wasn't bright enough for me, so I used a 12-LED bulb for each map light. All but the center console bulb is a Super White, which I used a blue bulb. I used the 9-LED festoon bulb for the dome light.

PM sent.

Presto

I ordered 2 red ones off of ebay for 5.25 shipped, im going to try them in all the slots to see what they look like, my car is SMR so i was hoping the red would look good, if it doesn't i am going to order all whites and put them in. Im thinking about ordering a few whites right now just for the license plate light, i doubt red would look all that great back there, a little too kiddish. We'll see, here are some pics of the ones I already got.

Presto

Here is a chart for our car, 2001 ACURA CL

Low beam headlamp
HID-D2R

High beam headlamp
9005
9005SU Silverstar ULTRA for Ultra Night Vision - The Whitest and Brightest Halogen
9005ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen
9005XV XtraVision Halogen Upgrade: Up to 20% Brighter
9005CB Cool Blue Halogen Upgrade: White Hot; Super Cool; 100% Street Legal

Parking light
1157A
1157AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style
1157ALL Long Life Upgrade: Up to twice the life of the standard lamp
3652

Front turn signal
1157A
1157AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style
1157ALL Long Life Upgrade: Up to twice the life of the standard lamp

Rear turn signal 7440, Tail light 7443, Stop light 7443, High mount stop light 7440

License plate 168, Back up light 7440, Front sidemarker 168, Rear sidemarker 7443

Glove box 158, Map light 168, Dome light DE3022, Step/Courtesy light 158

Trunk/Cargo area 168
Im thinking about doing all of the lights except things like headlights, tail lights, turn signals, anything that would be kinda hard to get to. Hope this helps

kyle77777

Be sure to put pics up when you get these installed. Preferably nighttime before and after shots

Presto

I got the bulbs yesterday but i'm having trouble pulling out the stock bulbs, im afraid to use pliers because I will shatter the bulb, whats the easiest way to pull those slippery things out?

Presto

Well i tried again and they came out very easily, i only got 2 red leds so i put one in the license plate and one in the map light, I just want to see how bright they are at night, ill post pics tonight of them

Presto

Here are some pics with the single led reds, Single LED is way to dim, i just ordered 5 led whites for the map lights, im kinda thinking about keeping the red for the license plate cause it looks flush with the tails. Check it out


That is the map light ^ Not bright at all!

cltypeSLOW

post pics of the LED tails.

Presto

Im sorry I should have been more specific, they look flush with the tails because they are red at night, they are not LED, sorry for the mix up.

Dirty Type-S

hmm that was cvlever of the red led.. it probably accents r red car nicely too...

how did u pop them out easy? what ewere u doing wrong first time? mine should come in any day now and i dont want to get pissed off at something as easy as plate lights.

Presto

The covers to the map lights came off extremely easy, but when i went to grab the bulb it was very slippery and I could not get a grip on them, eventually I used the same small flathead screw driver i used to take the cover off to kinda pop the bulbs out, came out very easy, the license plate light you have to unscrew with a phillips and then same process for popping it out, im gonna order a dome light soon and thinking about trying the reds as the courtesy lights on the doors, that might look good. ill post pics if I do it

SuperTrooper169

iTrader: (2)

I don't know about Texas law, but in most states either red (excluing tail lights of course) or blue lights are illegal to have on your car and are only legal on emergency vehicles. Just don't want to see anyone get pulled over for it.

gaping46and2

iTrader: (2)

Not sure how legal it is to have a red license plate light. Might just be more attention you want, esp. from the authorities.

gaping46and2

iTrader: (2)

Just searched Google for the new Texas State laws regarding license paltes. This is taken directly from www.txdps.state.tx.us:

Jrezo

I Agree

I would only rock the exact hue of the Lexus lights anything eles is screming pull me over

BigLizard

Dumb question, the 7443 stop lights are the "Push-in" type bulbs? If that's the case my ...

gaping46and2

iTrader: (2)

This is what a 7443 bulb looks like:

These are used in our brake lights and reverse lights.

Presto

After reading your posts about Texas law, thank you for the research, I took the red out of the license plate and the one out of the map light and put both of them in the courtesy lights, this is where they will stay, at night they look really good, because the courtesy lights dont put off that much light anyways, the reds look real nice, a definite thought for any SMR owner, 2 dollar 2 minute mod that looks good! As soon as the white 5 led's come in I am gonna put them in the map lights and see how bright they look for the license plate.

Presto

I just ordered a 9 led dome light and 2 13 led's. I think im gonna put the 5 led in the license plate and use the 13's for the map lights, with those and the dome I think it will look good. Prolly gonna keep the reds in the courtesy, they look

Dirty Type-S

pics please??? lol

Presto

My phone camera can't pic up the lights good enough, I will have a better camera in 4 days, I should have more led's in by then and I will post more pics!

RYANGP

yeah i thought that red looked like crap
i'd just stick with the hyper whites

Presto

In the picture it did look bad, but when you stood back and saw it surrounded by the 2 red tail lights, it looked pretty good, I didn't have a good enough camera to get a good pic of that, but i will have one in 3 days, I will get pics of everything then

Dirty Type-S

hey guys, so i got my leds in today.. and took a few pics to make a Smal DIY. its super easy.. and it takes about 7 minutes.

1. u need plyers, phillips head, flat head, and lights lol

2.take off the screws that hold the light onto the bumper

3. take off the two screws holding on the light cover

4. its good to clean the light cover as well with soap and water.

5. pull out the stock light bulb... i used plyers very gently because the bulb was deeper and slippery. the bulb wil slip right out with plyers.

6. put the new Led bulb in. [have ur lights on cuz the prongs have to be on each certain side.]

7. screw cover back on.

8. screw the light housing back onto the bumper.

9. ta dah! pimp ass led lights like the lexus's have. (they are Much Whiter then the picture looks.) this was taken in day time with teh garage closed.


i hope this gave some motivation to order a set of bulbs and DIY.

heres a link to the bulbs. it is liek 10 bucks.
http://cgi.ebay.com/ebaymotors/2-Bul...QQcmdZViewItem

thanks guy.

Presto

Nice job, when I replaced it I never took the whole light cover off so it hangs down, I just took the cover off and took the light out while still attached, post pics tonight of how the light looks installed and on. I should get my lights tomorrow and I'll do the same.

ther4ndom

if i wanna replace my dome lights, do i get 2 blue 194 LEDS?

how do i open the compartment to put them in there

Presto

No 194s will not fit in there, you have to get a 3022 festoon bulb. See earlier in this thread for the exact size chart on all bulbs, i suggest superbrightleds.com and order this Product: 3022-x9 LED Festoon bulb $ 2.95 (each). It is extremely easy to take off the cover, a small flat head screw driver placed in the slot along the edge will pry it out. Don't force anything or you may break the cover, it should just pry out. Good Luck

Dirty Type-S

yes. everything comes off super easy.. its just bout how u go about pulling it out. the bulbs come out liek butter as long as u keep it strait... u can use plyers to take them out just dont squeez hard.a

LIPPSTUH

iTrader: (2)

nice shish.... any night pix, i'm debating on 6-led or 12... i think 6 is just right.

RYANGP

6 should be good for the licence plate light, but for the interior it just won't be bright enough

Dirty Type-S

6 LEd is more then enough.

12 would be over kill imho.

i have night pics ill post in 12 secod.. the light beams onto the ground too lol.

it looks super good tho and def adds class to the car.

Dirty Type-S

there u go. my camera phone takes away a lot of the added light but u get the jist. its much brighter in person.

Presto

Looks great, nice work! I should be getting mine any day now, i'll post pics asap!

LIPPSTUH

iTrader: (2)

wow, it looks sexy. thanks guys