01_CL-S_COUPE

Well the clutch is done and I just did plugs/wires/cap/rotor on my 93 civic. I went to turn it on, turned on fine for 5 seconds, then it turned off and it won't start. I have no idea what I did wrong. I even went back and changed everything, still won't turn over. Any ideas anyone?

Lord Helmet

Sounds like something is off... Maybe a wire is on the wrong plug, cap not on properly, or the rotor is not installed properley?? I'd check and recheck. Something's got to be off..

Smitty

93 civic

am I missing something here?

I am all about helping people, but diagnosing your car problems on a car other than a Acura CL or over the internet for that matter is alittle out in left field.

is it dark yet?....

zoltanh

This is www.acura-cl.com maybe you were trying to post on www.hondacivicforums.com and you put in the wrong address.

Excelerate

iTrader: (1)

Make sure you put the wires back on the distributor cap in the correct firing order.