kuzdu

hey guys i remebered there was a post where a user from here installed a fuel pressure gauge under the hood for there supercharger.

i cant find that link any more or thread

does anyone know the part numbers and fitting like -6an female

thanksssss

Allout

Is this what you were looking for?

Accord_V6_400m

iTrader: (1)

The bottom AN fitting that replaces the stock FPR is actually pretty rare amongst shops and runs under $10 at Comptech its a -6 AN to 12 x 1.25 male/male fitting, the metric side being of course the male threaded part that threads into that fuel box thing in the picture above.

Gauge itself is around $25, fitting would be about $20 if you get American made or $10 if outside America, the better built American fittings are not as shiny as their foreign counterparts.

PowerRev

Contact Excelerate


http://store.excelerateperformance.c.../i-222331.aspx

rtatsutani

12 x 1.25 (w/crush washer) -> -6AN! That was the adapter I could not get a hold of! Ended up going to a machine shop to get one custom made.

PowerRev

If any of you need a M12 x 1.25 thread bolt. XRP 700903 is the part number you need. Its a M12x 1.25 to -6.

kuzdu

thankss guys this is what i needed