Dent Wizard
#1
Racer
Thread Starter
Join Date: Dec 2000
Location: NJ
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Dent Wizard
Have any if you guys ever used Dent Wizard? Is it quality work? And how expensive are they? I have like 3 quarter sized dings on my doors, and I was wondering how much it would cost me to get that shit fixed. Thanks!
------------------
01 white/ebony CL-S
Pewter Xephyr CAI
PIAA's 19224
------------------
01 white/ebony CL-S
Pewter Xephyr CAI
PIAA's 19224
#2
Burning Brakes
Join Date: Mar 2001
Location: Austin, TX
Age: 53
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
I haven't used "Dent Wizard" per se, but I have used the paintless dent repair places before (we have one called Dent Magic here) and generally they will do good work, to where you'll never know the ding was there. Here in Austin, the first dent usually runs around $40, the 2nd $30, and $20 or for the third. Depends on the location of the dents of course.
Just don't watch them do the work, you will find it quite disturbing to watch someone hit your car repeatedly with a giant rubber hammer!!
------------------
White/Black 2001 CL-S (3rd sold in Austin)
- navigation, moonroof visor, upgraded cupholder, Acura spoiler
- Polarg m-6, tint 20% rear, 35% sides, Eibach springs
- 18" Racing Hart C2000 Evo's w/Pirelli P7000's, V1 hardwired
- Polk Momo 12" sub w/Precision Power amp, AudioControl Epicenter
[This message has been edited by mcdanjw (edited 06-04-2001).]
Just don't watch them do the work, you will find it quite disturbing to watch someone hit your car repeatedly with a giant rubber hammer!!
------------------
White/Black 2001 CL-S (3rd sold in Austin)
- navigation, moonroof visor, upgraded cupholder, Acura spoiler
- Polarg m-6, tint 20% rear, 35% sides, Eibach springs
- 18" Racing Hart C2000 Evo's w/Pirelli P7000's, V1 hardwired
- Polk Momo 12" sub w/Precision Power amp, AudioControl Epicenter
[This message has been edited by mcdanjw (edited 06-04-2001).]
#3
CLS- we have arranged to have Dent Wizard here for the meet on Sat to estimate and repair those nasty dings!
------------------
Wayne Gruen
Service Manager
Park Ave Acura
*** The opinons expressed above are my own and I in no way speak for American Honda or Acura. ***
2002 TL-S Black on Black
Factory Body Kit, Factory Spoiler, Comptech Springs, Comptech Sways, Comptech Headers, Comptech Exhaust, Xephyr CAI
Tuning by Jens
------------------
Wayne Gruen
Service Manager
Park Ave Acura
*** The opinons expressed above are my own and I in no way speak for American Honda or Acura. ***
2002 TL-S Black on Black
Factory Body Kit, Factory Spoiler, Comptech Springs, Comptech Sways, Comptech Headers, Comptech Exhaust, Xephyr CAI
Tuning by Jens
#4
Racer
Thread Starter
Join Date: Dec 2000
Location: NJ
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
<font face="Verdana, Arial" size="2">Originally posted by wayneg:
CLS- we have arranged to have Dent Wizard here for the meet on Sat to estimate and repair those nasty dings!
</font>
CLS- we have arranged to have Dent Wizard here for the meet on Sat to estimate and repair those nasty dings!
</font>
------------------
01 white/ebony CL-S
Pewter Xephyr CAI
PIAA's 19224
#5
Honkey
Join Date: Jan 2001
Location: Scottsdale, AZ
Age: 48
Posts: 2,728
Likes: 0
Received 0 Likes
on
0 Posts
I've used Dent Wizard numerous times and they have yet to disappoint me. You'll be very happy with the results. My price was $80 to have 2 little dings pulled out of my rear quarter panel.
Aaron
------------------
2001 CL-P, new project undergoing complete reconstruction. As of now: Custom CAI fabricated by SRD, Polarg M6 bulbs, 4 ProHopper Chrome hydraulic pumps with whammy tanks, 4 ProHopper dumps, 4 Optima marine deep-cycle batteries, 4 switches. Much much more to come...
1997 Accord coupe EX-L. Chrome suspension, Chrome motor, every bolt-on imaginable. One pump, 8 dump hydraulics with accumulators. Leather, Billet grills, 18" Neeper Shadows...etc..etc http://www.artofnoize.com/Cars/aaron.htm
1990 Toyota standard cab. Bodydropped 3". 17" KMC Nemesis', extensive suspension work. 4 wheel airbags.
Aaron
------------------
2001 CL-P, new project undergoing complete reconstruction. As of now: Custom CAI fabricated by SRD, Polarg M6 bulbs, 4 ProHopper Chrome hydraulic pumps with whammy tanks, 4 ProHopper dumps, 4 Optima marine deep-cycle batteries, 4 switches. Much much more to come...
1997 Accord coupe EX-L. Chrome suspension, Chrome motor, every bolt-on imaginable. One pump, 8 dump hydraulics with accumulators. Leather, Billet grills, 18" Neeper Shadows...etc..etc http://www.artofnoize.com/Cars/aaron.htm
1990 Toyota standard cab. Bodydropped 3". 17" KMC Nemesis', extensive suspension work. 4 wheel airbags.
#6
Racer
Thread Starter
Join Date: Dec 2000
Location: NJ
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
These guys don't sound too bad, I'll make sure to bring some money on Sat. to the Park Ave. meet so I can get these annoying dents fixed!
------------------
01 white/ebony CL-S
Pewter Xephyr CAI
PIAA's 19224
------------------
01 white/ebony CL-S
Pewter Xephyr CAI
PIAA's 19224
#7
I've used these paintless dent repairers many times in the past and they all do a great job. Sometimes the location of the dent may make it harder to remove completely but they have never ceased to dissapoint me.
------------------
Anthony
'01 CL-S black/parchment
spoiler and NAV.
------------------
Anthony
'01 CL-S black/parchment
spoiler and NAV.
Trending Topics
#8
Instructor
Join Date: Apr 2001
Location: houston, tx, usa
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
as far as dent wizard is concerned, it is $75 per panel, so if you two dings are in one panel, it will only be $75, but if two different panels, $150. i believe WEBTOKER just went there last week to get some dents removed.
------------------
'01 CL-S black bone stock
with the best radar in the world, Valentine One
------------------
'01 CL-S black bone stock
with the best radar in the world, Valentine One
#9
Suzuka Master
<font face="Verdana, Arial" size="2">Originally posted by CLS16:
Have any if you guys ever used Dent Wizard? Is it quality work? And how expensive are they? I have like 3 quarter sized dings on my doors, and I was wondering how much it would cost me to get that shit fixed. Thanks!
</font>
Have any if you guys ever used Dent Wizard? Is it quality work? And how expensive are they? I have like 3 quarter sized dings on my doors, and I was wondering how much it would cost me to get that shit fixed. Thanks!
</font>
There are also some independents that some of the detailers use. These are guys who have been doing bodywork on classic (and other cars) for countless years, and will even do a panel (with multiple dents) for $50.
There are some really great ones out there -- try to get a good referral!
------------------
Silver 2001 CL-S with NAVI
- Mud guards
- Wheel locks
- Toyo T1S 235/45ZR17-97W* Proxies on 17x8" SSR Competition wheels (48lbs less than stock)
- Kevlar/SS Brake lines w/Brembos?
- Comptech headers & sways
- Silver AEM CAI
- 10 coats of Zaino magic
[This message has been edited by EricL (edited 06-04-2001).]
#10
It works, and NO PAINT..........can't believe the Dent Doctor in Austin is so cheap. Here around Nashville it's $50-80 per dink removal.
------------------
CL-S PDG, TR Typhoon Wheels, Comptech Sways, Solaris 9005, guards, nose mask, V-1 & remote.
http://albums.photopoint.com/j/View?...493&p=31386570
------------------
CL-S PDG, TR Typhoon Wheels, Comptech Sways, Solaris 9005, guards, nose mask, V-1 & remote.
http://albums.photopoint.com/j/View?...493&p=31386570
#11
Suzuka Master
Join Date: Nov 2001
Location: TEXAS
Age: 43
Posts: 6,085
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bc01cls
It works, and NO PAINT..........can't believe the Dent Doctor in Austin is so cheap. Here around Nashville it's $50-80 per dink removal.
------------------
CL-S PDG, TR Typhoon Wheels, Comptech Sways, Solaris 9005, guards, nose mask, V-1 & remote.
http://albums.photopoint.com/j/View?...493&p=31386570
It works, and NO PAINT..........can't believe the Dent Doctor in Austin is so cheap. Here around Nashville it's $50-80 per dink removal.
------------------
CL-S PDG, TR Typhoon Wheels, Comptech Sways, Solaris 9005, guards, nose mask, V-1 & remote.
http://albums.photopoint.com/j/View?...493&p=31386570
sidemarker
Thread
Thread Starter
Forum
Replies
Last Post
TLDude876
Car Talk
134
12-28-2016 03:18 PM
mugen_kid
Member Cars for Sale
7
11-13-2015 10:38 PM
asahrts
Member Cars for Sale
0
09-04-2015 05:55 PM