CLEARED THE LIGHTS! (PICS)
i searched acura-tl.com for the original pics of cleared headlights. these pictures are from Big-V on the acura-tl.com board.
cmon! i know you want them.
[This message has been edited by so cal type s (edited 01-14-2001).]
cmon! i know you want them.
[This message has been edited by so cal type s (edited 01-14-2001).]
Damn that looks great! Wasn't there someone else that did it....not sure.. I think he was on this board?
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
those road lampz match the hid perfectly. also any know wat kind of bulbs those corner's are using. that makes the car look so slick. i want i want.
------------------
CL-S
White/Ebony/Navi/Spoiler/Visor/Full Bra/Mud Guards/Cargo Net/Acura Car Cover/Tint 20%,35%,5% on Sun Roof, Rockford 250a2 Amp w/JL10w6 / K&N Drop in Filter. Comptech Springs. Polarg m-6.
Comptech Headers soon now that I have a JOB again. hehe
gtech 0-60 6.03 w/ 438 pound load.
------------------
CL-S
White/Ebony/Navi/Spoiler/Visor/Full Bra/Mud Guards/Cargo Net/Acura Car Cover/Tint 20%,35%,5% on Sun Roof, Rockford 250a2 Amp w/JL10w6 / K&N Drop in Filter. Comptech Springs. Polarg m-6.
Comptech Headers soon now that I have a JOB again. hehe
gtech 0-60 6.03 w/ 438 pound load.
Trending Topics
Damm that pic makes me want it toooo. Does anyone remember when i decaled my lights. I wish it turned out better but its gone now, and i may consider doing it again. What do u think, heres the pics again.
WG
WHAt do u think, do it again, or no?
------------------
The SILVER STREAKER CL-S no navi, spoiler, tint all around, moonroof visor,
indaglo emblom, ACURA.CL.com stickers, eurolights fog lights, bel 950 radar detector, and 2 chamber flowmaster exaust
coilovers or springs to come soon 501+ posts makes me a freak on the old Cl page.
WG
WHAt do u think, do it again, or no?
------------------
The SILVER STREAKER CL-S no navi, spoiler, tint all around, moonroof visor,
indaglo emblom, ACURA.CL.com stickers, eurolights fog lights, bel 950 radar detector, and 2 chamber flowmaster exaust
coilovers or springs to come soon 501+ posts makes me a freak on the old Cl page.
<font face="Verdana, Arial" size="2">Originally posted by Bodizafa:
wish i could see the back tail lights cleared out... that would be sweet... </font>
wish i could see the back tail lights cleared out... that would be sweet... </font>
------------------
2001 Acura 3.2 CL Type-S
San Marino Red/Ebony/Navi/Spoiler/Nose Mask/Mud Guards/Wheel locks/
Comptech Springs & Filter/PIAA 1969/20% Tint/Acura lettering removed/
12in Sub with AMP/Dynomated Trunk/Sub control under dash/
Clifford G4 Solaris Alarm
damn... that shit looks tight... ask Big-V how he did it! the job was really clean
------------------
2001 Acura 3.2 CL Type-S w/ Navigation
Nighthawk Black/Ebony
Two 12'' Alpine Type-S Subs, Kenwood 600-watt Amp
------------------
2001 Acura 3.2 CL Type-S w/ Navigation
Nighthawk Black/Ebony
Two 12'' Alpine Type-S Subs, Kenwood 600-watt Amp
from the photo i've seen..it is really cool escpecially at night and how much will that be? and where can i get it..thanks
------------------
2001 Acura Red CL Type S.
1997 Honda Civic EX.
!!!! VTEC Power !!!!
Powered by HONDA
Powered by MUGEN
typescl@yahoo.com
[This message has been edited by Type S (edited 01-15-2001).]
------------------
2001 Acura Red CL Type S.
1997 Honda Civic EX.
!!!! VTEC Power !!!!
Powered by HONDA
Powered by MUGEN
typescl@yahoo.com
[This message has been edited by Type S (edited 01-15-2001).]
<font face="Verdana, Arial" size="2">Originally posted by Type S:
from the photo i've seen..i think the tl and cl head light are exactly the same..so how much will the tl clear headlight cost? and is it going to fit in our cars? ????????good luck to us
Uh, No. the cl and the tl's do NOT have the same headlight housing. look again my frined.
</font>
from the photo i've seen..i think the tl and cl head light are exactly the same..so how much will the tl clear headlight cost? and is it going to fit in our cars? ????????good luck to us
Uh, No. the cl and the tl's do NOT have the same headlight housing. look again my frined.
</font>
------------------
CL-S
White/Ebony/Navi/Spoiler/Visor/Full Bra/Mud Guards/Cargo Net/Acura Car Cover/Tint 20%,35%,5% on Sun Roof, Rockford 250a2 Amp w/JL10w6 / K&N Drop in Filter. Comptech Springs. Polarg m-6.
Comptech Headers soon now that I have a JOB again. hehe
gtech 0-60 6.03 w/ 438 pound load.
hey those are my pics!!!
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
------------------
'01 cl type-S black/black
35% neutral smoke tint... cleared out headlights replaced with polarg m-14's and piaa 19169's... piaa 19169's in roadlamps, doorlights, maplights, trunk light, license plate night... mini-max hyperwhite domelight... comptech headers, springs, swaybars, and drop-in filter
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
------------------
'01 cl type-S black/black
35% neutral smoke tint... cleared out headlights replaced with polarg m-14's and piaa 19169's... piaa 19169's in roadlamps, doorlights, maplights, trunk light, license plate night... mini-max hyperwhite domelight... comptech headers, springs, swaybars, and drop-in filter
Yo, I saw your CL with the clear corners. PHAT! I have a 99CL and was looking for clears to put in the front bumper. Haven't been able to find them yet though. Any suggestions?
<font face="Verdana, Arial" size="2">Originally posted by tw1112:
Damn that looks great! Wasn't there someone else that did it....not sure.. I think he was on this board?
</font>
Damn that looks great! Wasn't there someone else that did it....not sure.. I think he was on this board?
</font>
<font face="Verdana, Arial" size="2">Originally posted by big-V:
hey those are my pics!!!
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
</font>
hey those are my pics!!!
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
</font>
Sup, fellow Viet, Cl-S owner, in Houston
The lights are awesome, quick question on the clearing out process? Did you do it yourself or did you have it done by someone? And so far have there been any problems like a no tight seal letting moisture or water or anything of that nature in the head lights?
Sweet ride once again!
<font face="Verdana, Arial" size="2">Originally posted by big-V:
hey those are my pics!!!
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
</font>
hey those are my pics!!!
okay well that's all i wanted to say, and if you wanna know bout bulbs, jus check the sig 
</font>
Sup, fellow Viet, Cl-S owner, in Houston
The lights are awesome, quick question on the clearing out process? Did you do it yourself or did you have it done by someone? If you did it your self what was the process? And so far have there been any problems like a no tight seal letting moisture or water or anything of that nature in the head lights?
Sweet ride once again!
hey kwick-cl-ver-s, well i did it myself with the help of a friend (you do it tha same way as you would do it with a civic) and i have had no probs, jus make sure that you seal it COMPLETELY.
------------------
'01 cl type-S black/black
mods (in order):
35% neutral smoke tint... cleared out headlights replaced with polarg m-14's and piaa 19169's... piaa 19169's in roadlamps, doorlights, maplights, trunk light, license plate light... mini-max hyperwhite domelight... comptech headers, springs, swaybars, and drop-in filter... infinity basslink subwoofer
------------------
'01 cl type-S black/black
mods (in order):
35% neutral smoke tint... cleared out headlights replaced with polarg m-14's and piaa 19169's... piaa 19169's in roadlamps, doorlights, maplights, trunk light, license plate light... mini-max hyperwhite domelight... comptech headers, springs, swaybars, and drop-in filter... infinity basslink subwoofer
So when and where do you guys want to meet and clear those lights?
------------------
2001 Acura CL Type-S Satin Silver/Ebony
Debadged, PIAA Roadlamps, M-11 Turn signals, Comptech Headers, Comptech Springs, custom intake
------------------
2001 Acura CL Type-S Satin Silver/Ebony
Debadged, PIAA Roadlamps, M-11 Turn signals, Comptech Headers, Comptech Springs, custom intake
<font face="Verdana, Arial" size="2">Originally posted by big-V:
hey kwick-cl-ver-s, well i did it myself with the help of a friend (you do it tha same way as you would do it with a civic) and i have had no probs, jus make sure that you seal it COMPLETELY.
</font>
hey kwick-cl-ver-s, well i did it myself with the help of a friend (you do it tha same way as you would do it with a civic) and i have had no probs, jus make sure that you seal it COMPLETELY.
</font>
Hey, I decided to join you guys on the project.
just one question though, will it look ugly if I keep the stock light bulbs ? but wasn't those blue ones and white ones illegal here in Cali ?
so when are you goona do it ?
------------------
2001 Acura CL Type-S. Blk/Blk w/Navi, Spoiler, PIAA Platinum Series Super White High Beams, PIAA 19169 Platinum Super White Wedge Bulbs, 20% / 5% tints.
So far four door dings, two on each side, DVD Navigation System Unit replaced, Both Driver and Passenger side seat back fell off, Metal piece inside of the wiper came out, planning to replace both wipers and wind shield next week.
just one question though, will it look ugly if I keep the stock light bulbs ? but wasn't those blue ones and white ones illegal here in Cali ?

so when are you goona do it ?
------------------
2001 Acura CL Type-S. Blk/Blk w/Navi, Spoiler, PIAA Platinum Series Super White High Beams, PIAA 19169 Platinum Super White Wedge Bulbs, 20% / 5% tints.
So far four door dings, two on each side, DVD Navigation System Unit replaced, Both Driver and Passenger side seat back fell off, Metal piece inside of the wiper came out, planning to replace both wipers and wind shield next week.
Re: replacing side marker/parking bulbs
I've read the manual of course but
taking the two plastic screws out just doesnt cut it, it looks like I have to totally mutilate the inside fender molding aside to make room for my hand to reach alllll... the way inside, which is a pretty deep reach.
Thus, I chickened out..

I dont wana bend it beyond a "point of no return" where the plastic molding won't bend back into original shape; if that happens all sorts of shit like puddles of dirt/mud can get in there
Did you guys take out 3 plastic screws instead of 2 mentioned by the manual?
Or is there another magic trick to this?
my M-14s and M-4s are jus sittin there doing nuthin
Would appreciate some help. thx.
------------------
- Kvit -
2001 CL-P Blue Sub 6
Polarg BlHybrid M-6 Road lamps
http://albums.photopoint.com/j/Album...725&a=10358832
I've read the manual of course but
taking the two plastic screws out just doesnt cut it, it looks like I have to totally mutilate the inside fender molding aside to make room for my hand to reach alllll... the way inside, which is a pretty deep reach.
Thus, I chickened out..

I dont wana bend it beyond a "point of no return" where the plastic molding won't bend back into original shape; if that happens all sorts of shit like puddles of dirt/mud can get in there
Did you guys take out 3 plastic screws instead of 2 mentioned by the manual?
Or is there another magic trick to this?
my M-14s and M-4s are jus sittin there doing nuthin
Would appreciate some help. thx.
------------------
- Kvit -
2001 CL-P Blue Sub 6
Polarg BlHybrid M-6 Road lamps
http://albums.photopoint.com/j/Album...725&a=10358832
KavexTrax - Don't worry about the plastic...it goes right back into place.
I actually took 4 plastic screws out. I turned the wheel to the right when changing the left side and visa versa to make some more room. Just push and twist to get the bulbs out. Good luck.
------------------
2001 Acura CL Type-S Satin Silver/Ebony
Debadged, PIAA Roadlamps, M-11 Turn signals, Comptech Headers, Comptech Springs, custom intake
I actually took 4 plastic screws out. I turned the wheel to the right when changing the left side and visa versa to make some more room. Just push and twist to get the bulbs out. Good luck.------------------
2001 Acura CL Type-S Satin Silver/Ebony
Debadged, PIAA Roadlamps, M-11 Turn signals, Comptech Headers, Comptech Springs, custom intake
teh Senior Instigator
Joined: Sep 2000
Posts: 44,094
Likes: 980
From: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
i'll clear mine out with you...oh wait..they come clear stock 
------------------
pays to be young and crazy
-99 acura 3.0 CL
-58 Caddy Eldorado Biarritz
-55 chevy suburban (chopped dropped tubbed)

------------------
pays to be young and crazy
-99 acura 3.0 CL
-58 Caddy Eldorado Biarritz
-55 chevy suburban (chopped dropped tubbed)
Any more details on doing this? Thanks..
------------------
2001 Acura CL Type-S
Black - Ebony Interior - Spoiler - 20% Tint
2000 Mercedes Benz E320
Black - Black Interior - Nav - Chrome AMG Rims
------------------
2001 Acura CL Type-S
Black - Ebony Interior - Spoiler - 20% Tint
2000 Mercedes Benz E320
Black - Black Interior - Nav - Chrome AMG Rims
hey- so cal type s
did you ever end up clearing your corners?
------------------
2001 Acura CL Type S, black/ebony, spoiler, 35% tint, V1, comptech springs, weather mats, piaa19170-doors, piaa19169-road lamps, pia19168-map lights
aim:silvn1
goldn1
did you ever end up clearing your corners?
------------------
2001 Acura CL Type S, black/ebony, spoiler, 35% tint, V1, comptech springs, weather mats, piaa19170-doors, piaa19169-road lamps, pia19168-map lights
aim:silvn1
goldn1
<font face="Verdana, Arial" size="2">Originally posted by B-Dub:
Yo, I saw your CL with the clear corners. PHAT! I have a 99CL and was looking for clears to put in the front bumper. Haven't been able to find them yet though. Any suggestions? </font>
Yo, I saw your CL with the clear corners. PHAT! I have a 99CL and was looking for clears to put in the front bumper. Haven't been able to find them yet though. Any suggestions? </font>

Here ya go....
http://www.acura-cl.com/ubb/Forum10/HTML/000003.html
------------------
1998 Iced Blue CL 3.0 ** Some mods, but who cares, I want a Type-S!!
Moderator - 1st Gen Forum
Email: juniorbean@acura-cl.com
<font face="Verdana, Arial" size="2">Originally posted by goldn1:
hey- so cal type s
did you ever end up clearing your corners?
</font>
hey- so cal type s
did you ever end up clearing your corners?
</font>
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
80
Jan 9, 2025 04:40 PM
rockyboy
2G RDX (2013-2018)
46
Jan 25, 2016 06:00 PM



