PDGCLS01

Well I got both the screws out finally after dremeling the bastards, now the rotor will still not come off..is there something Im missing for the rotor to come off? someting to do with the E brake on the inside of the rotor? Help me please I searched everywhere and worded my quiry a million different ways and the search couldnt pull up anything...Im getting frustrated =(

pits200

Go grab yourself a 20lb sledgehammer and go to town. Obviously make sure you have the e-brake off.

As you hit it, put the car in neutral and rotate the rotor.

I probably spent 15 minutes of hitting from the back and front with my sledge.

PDGCLS01

THanks man I got it..that was a beating haha....Now I have new brakes in the rear....they werent pretty when I got them off haha...Thanks for the help bud...=)

pits200

No problem. Now make sure you bed them properly for the first couple weeks/300 miles so that they last as long as possible.

No hard breaking unless necessary and rolling stops as much as possible.

Allout

Here's a link to Stoptech's white papers on bedding in brakes and the purpose. It includes the procedures that I've used and have had great success using.

Very worth the time.

http://www.stoptech.com/tech_info/wp...contents.shtml

pits200

Wow, I was just re-reading this thread and I never thought I would be one of those guys who spells the word "Brake" wrong.

And I just noticed that I spelled it "Break" I am going to have to flog myself 10 times after posting this.