Just got my aligment done after dropping my car by 1. inches and it looks like i'm going to need a camber kit, but I'm curious why the camber is off only on one side of the car. right rear is -0.6 but the left rear is -1.7. height on both sides is even so I wonder if this is normal, did i mess anything up.
p.s
Any one know where i can pick up a camber kit for cheap.

 

It's normal, no camber is exactly the same on each corner of the car, same goes with toe. Talk to Scott @ Insightmotorsports, bought quite a few things from him, he's cheap and a good guy. SPC Camber from him I believe is $75-80 a side, don't quote me.

 

by the way that's 1.7 inches, not 1.

 

what should the correct setting for camber on all 4 points on our cars?

 

$75-80/side is a bit pricey i got my front SPC (L/R) fer $110 from Group 5 Motorsports down here in San Diego

 

CRW in Maryland sells them for $63.37 each rear for a 2nd gen CL.

CRW : 301-808-0050

I'm thinking of getting them just to be safe, my left rear is -1.5 and my right -.04.

 

1.1 to -1.1