Acura Cl Race Pedals Are Here!!!
#41
Type S that is what we are confirming and it will be released with the others shortley. Thanks for the question.
There will be a 6spd Set just like Type S Described above.
Get on the pre-order list if you are intrested again only 50 sets of each.
Thanks
Dave
There will be a 6spd Set just like Type S Described above.
Get on the pre-order list if you are intrested again only 50 sets of each.
Thanks
Dave
#42
Racer
#44
THE J35A2...
Originally Posted by Supercomputers
Guys 50 Sets will be made were looking at a release date of the 31st if the first install goes smooth. The way to get on the list is to make payment. Again only 50 sets.
#48
Guys Pics should be up by the weekend all Test Installers have there Kits. Place your orders now there will only be 50 Sets made to start. We will have a 6sp option any body who wants to do a test install PM me.
Payments can be taken via paypal or Check or Money order. See the Group Buy Thread in the Black Market Section.
Payments can be taken via paypal or Check or Money order. See the Group Buy Thread in the Black Market Section.
#54
Racer
iTrader: (1)
Ok guys, first thing to do is take take the pedals out of the box and admire them. Then follow the following steps.
1. Pull the rubber off the brake pedal.
2. Align the pedal on the brake and use a highliter or something else that will make a mark on the brake pedal on where to drill the holes.
3. Take the pedal off and drill the holes into the pedal. In the picture below, there are more holes in my pedal because I already had aftermarket ones on there before.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals003.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals002.jpg)
4. Once drilled, then put the pedal on, put the screw through the hole and put washer and nut on behind the pedal. You may want to use some pliers to hold the nut from behind the pedal to make sure you the the screws tight. These screws are allen head screws.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals005.jpg)
6. Next is the dead pedal, basically just align the pedal with the dead pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals010.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals004.jpg)
7. Next is the gas pedal, basically just align the pedal with the gas pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals008.jpg)
Here are some more pics of the complete install.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals007.jpg)
1. Pull the rubber off the brake pedal.
2. Align the pedal on the brake and use a highliter or something else that will make a mark on the brake pedal on where to drill the holes.
3. Take the pedal off and drill the holes into the pedal. In the picture below, there are more holes in my pedal because I already had aftermarket ones on there before.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals003.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals002.jpg)
4. Once drilled, then put the pedal on, put the screw through the hole and put washer and nut on behind the pedal. You may want to use some pliers to hold the nut from behind the pedal to make sure you the the screws tight. These screws are allen head screws.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals005.jpg)
6. Next is the dead pedal, basically just align the pedal with the dead pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals010.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals004.jpg)
7. Next is the gas pedal, basically just align the pedal with the gas pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals008.jpg)
Here are some more pics of the complete install.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals007.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals006.jpg)
#61
Racer
Originally Posted by Supercomputers
Everybody who is ordering get them in as soon as you can. I dont want anybody to be left out.
#66
Racer
Supercomputers
Originally Posted by Supercomputers
6 spd is 149.99 and the Auto is 139.99
#68
Pedals will start shipping Shortly
Still have a few sets left on the auto and the manual. Put in your order if intrested.
They are 149.99 Delivered our Paypal ID is ALLARNDPRODUCTS@YAHOO.COM
If you want to send a check or Money order PM Me.
Thanks
Dave
Still have a few sets left on the auto and the manual. Put in your order if intrested.
They are 149.99 Delivered our Paypal ID is ALLARNDPRODUCTS@YAHOO.COM
If you want to send a check or Money order PM Me.
Thanks
Dave
#74
Advanced
Join Date: Mar 2005
Location: Aberdeen, NJ
Age: 44
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Type S Zero
i just took a look at the pedal sets and a CLS-6 pedal set can be built with the existing pedals offered now :
throttle : 99-03 pedal
brake : 04+ 6sp pedal
clutch : 04+ 6sp pedal
foot rest : 99-03 pedal
throttle : 99-03 pedal
brake : 04+ 6sp pedal
clutch : 04+ 6sp pedal
foot rest : 99-03 pedal
Thanks either way!
#77
Racer
iTrader: (1)
Ok guys, first thing to do is take take the pedals out of the box and admire them. Then follow the following steps.
1. Pull the rubber off the brake pedal, and clutch pedal
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals047.jpg)
2. Align the pedal on the clutch pedal and use a highlighter or something else that will make a mark on the brake pedal on where to drill the holes.
3. Take the pedal off and drill the holes into the pedal.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals048.jpg)
4. Once drilled, then put the pedal on, put the screw through the hole and put washer and nut on behind the pedal. You may want to use some pliers to hold the nut from behind the pedal to make sure the screws are tight. These screws are allen head screws.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals039.jpg)
5. Next is the brake pedal, basically just align the pedal with the brake pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals033.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals038.jpg)
6. Next is the gas pedal, basically just align the pedal with the gas pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals041.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals040.jpg)
7. Next is the dead pedal, basically just align the pedal with the dead pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals043.jpg)
Here are some more pics of the complete install.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals044.jpg)
1. Pull the rubber off the brake pedal, and clutch pedal
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals047.jpg)
2. Align the pedal on the clutch pedal and use a highlighter or something else that will make a mark on the brake pedal on where to drill the holes.
3. Take the pedal off and drill the holes into the pedal.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals048.jpg)
4. Once drilled, then put the pedal on, put the screw through the hole and put washer and nut on behind the pedal. You may want to use some pliers to hold the nut from behind the pedal to make sure the screws are tight. These screws are allen head screws.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals039.jpg)
5. Next is the brake pedal, basically just align the pedal with the brake pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals033.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals038.jpg)
6. Next is the gas pedal, basically just align the pedal with the gas pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals041.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals040.jpg)
7. Next is the dead pedal, basically just align the pedal with the dead pedal, and then mark where the holes need to go, then take the pedal off and drill the holes. Then put pedal on, and screw them on.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals043.jpg)
Here are some more pics of the complete install.
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals044.jpg)
![](http://i43.photobucket.com/albums/e365/AcuraCl1/pedals045.jpg)