View Poll Results: What kind of problems have you had with your XS headers?
Multiple Choice Poll. Voters: 135. You may not vote on this poll
*** XS Power Header Owner Thread ***
#282
you know...i've had my headers on for a while now (about 6-7 months) and so far so good...I still get a little sound when getting on the gas but its not coins in the can...my guess after researching is resonance...anyway i was wondering for you guys with xs and exhaust...do you still have resonance with the exhaust or not? my headers are not wrapped either.
#283
slight resonance with my exhaust or no exhaust (been 6-7 months also). i dont even notice it anymore, only on cold starts. no wrap here. been thinkin of wrapping the flex but i'm lazy.
#284
My XS headers are now a year old now and haven't had any issues. My car is a daily driver and these headers are holding up very well. Not only did I pick up some descent horsepower, but I gained some MPG and that really helped when the gas prices started to soar. Should they crack for any reason, I would not hesitate to pick up another set.....
#285
Lead Footed
Update:
Headers have been on now for about 1 year and no problems noted.
They still look good as new . . oh, wait . . . I had them ceramic coated so of course they will.
Ruf
Headers have been on now for about 1 year and no problems noted.
They still look good as new . . oh, wait . . . I had them ceramic coated so of course they will.
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
Ruf
#287
Originally Posted by kquan721
I installed my xs headers 2 wks ago. there's no hissing at all since I wrapped the flex pipe.
problem is while reving up from about 1k rpm to 1500 I get the coin in can noise. also it resonates at 1900 and 2900 rpm. lastly when I rev high to about 5k rpm and shut down the coin in can noise occurs while the rpms drop...
forgot to mentioned...it just started to resonate today.
any advice on how to get this fixed?
problem is while reving up from about 1k rpm to 1500 I get the coin in can noise. also it resonates at 1900 and 2900 rpm. lastly when I rev high to about 5k rpm and shut down the coin in can noise occurs while the rpms drop...
forgot to mentioned...it just started to resonate today.
any advice on how to get this fixed?
![what](https://acurazine.com/forums/images/smilies/what.gif)
All this info on XS headers it priceless. Hopefully I'll be able to get some this summer when I get around to ordering them.
#288
The other day when I was leaving my uncle's house I started the car and was pulling out of the driveway when he motions me to stop. He's says you've got an exhaust leak somewhere. I thought I had noticed something earlier, but wasn't sure, but with him standing outside the car he could definitely hear it. The noise was only there for the first 10-15 seconds and then was gone. Before I go and loosen and retighten everything, I was wondering if anyone had any suggestions of the most likely culprit on the headers. I have been getting resonance and am going to wrap the flex pipe in a few weeks time (the resonance has been there since I installed them a couple of years ago). Could the flex pipe be the culprit and then stop leaking once it warms up a bit?
#290
Lead Footed
Originally Posted by TheWeez
What'd the ceramic coating cost you?
Ruf
#292
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
I don't think I posted anything here after I installed my XS headers. Before the install, i wrapped the flex pipe with heat-wrap really well. After the install, i noticed a big difference. It sounded a little raspy when revving it up, even with the flex pipe wrapped...kinda leads me to think our factory cats sound like crap with all that extra air coming out of them. for the first month, when i accelerated, the headers made this wooshing sound as some of you have mentioned, but it was almost in a clicking motion...however, thats gone away now and the exhaust sounds pretty damn good, except for when i rev it up in neutral and you can hear the cat (which still has less than 50K miles). I like the factory mufflers, but i am thinking about doing a whole custom, one-piece exhaust with a new cat, resonator, and either one or two mufflers. I think the car would sound better.
#293
........
iTrader: (3)
Join Date: Jan 2008
Location: Montgomery County, MD
Age: 39
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Well finally I can post here as a proud owner of the xs headers. I did some research before and inquired about the install of the headers and this thread was a great help. They were brand new headers and installed with the upgraded nuts and bolts. Install went smoothly, as the post mentioned earlier, there is a whooshing sound but thats about it. I do feel the power especially at 5k and above. I did not wrap the flex pipe, I will let time pass to see if I need to wrap the pipes as I only had the headers for a couple of days. All in all, for the price, and a few upgrades to the components this is a worthy mod for our cars!
#295
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheWeez
Where did people go to get the new bolts locally? Home Depot have the correct hardened ones?
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#296
I Wanna Beer
Arg. $28 each for the exhaust manifold gaskets or $14 each if I order online but $10 shipping makes it damn near even. Think I may just get them locally and return them if I don't need them.
#297
........
iTrader: (3)
Join Date: Jan 2008
Location: Montgomery County, MD
Age: 39
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheWeez
Where did people go to get the new bolts locally? Home Depot have the correct hardened ones?
Home Depot , Lowes should have them both. I was lucky I brought my xs headers from the black market and included was the upgraded nuts and bolts.
#298
........
iTrader: (3)
Join Date: Jan 2008
Location: Montgomery County, MD
Age: 39
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheWeez
Arg. $28 each for the exhaust manifold gaskets or $14 each if I order online but $10 shipping makes it damn near even. Think I may just get them locally and return them if I don't need them.
I would get it locally, that way you can just go return them and not deal with shipping them back , it would be much quicker, hope your install goes well.
#299
I Wanna Beer
Fel-Pro offers a manifold gasket at a much better price then the stealership but it doesn't appear that it has bolt holes in the right place. What do people think?
![](http://i31.tinypic.com/167pb9t.jpg)
#301
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheWeez
Fel-Pro offers a manifold gasket at a much better price then the stealership but it doesn't appear that it has bolt holes in the right place. What do people think?
![](http://i31.tinypic.com/167pb9t.jpg)
![](http://i31.tinypic.com/167pb9t.jpg)
This looks like the crap they give you with the XS headers...but it doesn't even look like the right shape!!
I would definetly stick with stock or similar. My car had low miles so i didn't even worry about the gaskets my stock ones held up fine. I would guess if you're in the 75k miles or more range you should definetly but new ones. I think i was around 40k when mine went in...no leaks.
#302
I Wanna Beer
Those pictured are the Fel-Pro gaskets that are suppose to be for the CL-S. The ones that come with the XS Power headers are the right design but crappy quality.
#303
........
iTrader: (3)
Join Date: Jan 2008
Location: Montgomery County, MD
Age: 39
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
I see how you are trying to save money. However , the only reason you are even considering new gaskets is because you want the install to go smoothly and you want the car to run good. My 2 cents would be to shell out the money for the OEM gaskets, upgraded nuts and bolts, and do the install. This is a small price to pay for knowing that the headers were installed with good quality parts, because the components that came with the XS headers are crap.
#304
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sayfulhaqq
I see how you are trying to save money. However , the only reason you are even considering new gaskets is because you want the install to go smoothly and you want the car to run good. My 2 cents would be to shell out the money for the OEM gaskets, upgraded nuts and bolts, and do the install. This is a small price to pay for knowing that the headers were installed with good quality parts, because the components that came with the XS headers are crap.
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
#305
Advanced
Join Date: Jan 2008
Location: Massachusetts
Age: 34
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
ok i find 2 site that had these xs power headers.
http://xs-power.com/acura-honda-nonturbo-headers-2.htm
http://www.ssautochrome.com/level.itml/icOid/1494
xs-power.com sell it for 130 shipped and ssautochrome for 120 shipped to my area. there both the same or something different? iono where u guys get urs at ?
http://xs-power.com/acura-honda-nonturbo-headers-2.htm
http://www.ssautochrome.com/level.itml/icOid/1494
xs-power.com sell it for 130 shipped and ssautochrome for 120 shipped to my area. there both the same or something different? iono where u guys get urs at ?
#306
Moderator Alumnus
Originally Posted by duCksterz
ok i find 2 site that had these xs power headers.
http://xs-power.com/acura-honda-nonturbo-headers-2.htm
http://www.ssautochrome.com/level.itml/icOid/1494
xs-power.com sell it for 130 shipped and ssautochrome for 120 shipped to my area. there both the same or something different? iono where u guys get urs at ?
http://xs-power.com/acura-honda-nonturbo-headers-2.htm
http://www.ssautochrome.com/level.itml/icOid/1494
xs-power.com sell it for 130 shipped and ssautochrome for 120 shipped to my area. there both the same or something different? iono where u guys get urs at ?
Get the cheaper set.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#307
I Wanna Beer
Originally Posted by BigLizard
they are both the same company.
Get the cheaper set.![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
Get the cheaper set.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#308
3.5 psi
iTrader: (1)
Had my headers put in today. Got some OEM gaskets, upgraded bolts, and wrapped the flex pipe before the install. The mechanic had to heat up and bend the downpipe slightly because it wasn't lining up right. Anyways, they're on perfect now. Hit some traffic on the highway on the way home, so i didn't get to really push it, but getting onto the highway was fun. 3rd and 4th gear really pull. Love the sound also. I noticed a tiny bit of the wooshing sound ppl talked about, but it's barely there. Overall very pleased.
#309
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
I don't remember which site I bought mine from, but i got them for $99 shipped!! I guess I just bought them at the right time or something. What a good deal even after buying nuts and bolts and some heat-wrap.
#310
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by J32A26MT
I don't remember which site I bought mine from, but i got them for $99 shipped!! I guess I just bought them at the right time or something. What a good deal even after buying nuts and bolts and some heat-wrap.
#312
I Wanna Beer
![](http://acuraautomotiveparts.org/acura/jsp/mws/catimgs/13s3m0_b02.gif)
Called the local stealership and ordered the gaskets today. Asked about the bolts to the cat. He said they're $16 a piece. Can these just be replaced with any old bolt? #4 in the picture.
#313
Quarantuning
iTrader: (4)
Originally Posted by 02type-s
Anyone running the XS headers with the Random Technology cat + exhaust?
#314
Instructor
Join Date: Jul 2007
Location: Ontario
Age: 42
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheWeez
Called the local stealership and ordered the gaskets today. Asked about the bolts to the cat. He said they're $16 a piece. Can these just be replaced with any old bolt? #4 in the picture.
I replaced mine when I installed my headers. The old ones were rusted out completely.
Also get heat-treated ones if you can (grade 8,10). Will make it easier to remove in future if needed.
#315
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SlickShiftNall6
I have xs headers, and RT cat. Installed both at the same time, made install quite easy bc I didn't have too remove the old cat from the stock header. However I still have stock exhaust, what is your question?
#316
-Arsenic-
Originally Posted by SlickShiftNall6
I have xs headers, and RT cat. Installed both at the same time, made install quite easy bc I didn't have too remove the old cat from the stock header. However I still have stock exhaust, what is your question?
#317
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02type-s
I have the Apexi WS2s, and I just wanted to know if its gonna be too loud with the headers AND the r/t cat.
#318
-Arsenic-
Originally Posted by J32A26MT
damn where/when did you get the apexi? they discontinued it and i cant find one in stock anywhere...
#319
Quarantuning
iTrader: (4)
Originally Posted by J32A26MT
Does RT make a factory replacement for the type S?
02type-s... So as for the sound difference all I can go on is how the xs and rt sound together. After the flex pipe got wrapped it sounds quite at idle, and at low rpm, and highway cruising. When you get on it, as everyone likes to say on here it kinda gets that g35 thing goin on. I love it, so do my friends, and girls seem to like it too which is important. Not to loud at all and thats what people describe the xs sounding like without the rt cat installed. So my guess it wont change sound much if any.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#320
I'll put you in the wall
Join Date: Mar 2007
Location: Bowie, MD
Age: 41
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SlickShiftNall6
I bought my rt cat from excelerate he said it would fit and it did. I think it was actually made for the cl-p. Anyhow for it to fit with no codes Josh from excelerate told me I needed a 02 extension wire. He recommended buying the gasket and bolt kit for easy install. I didn't have to worry about saving any of the old stuff. Glad I did saved alot of time, and for the extra 30 or whatever dollars it was worth it trust me. If you plan on getting one i'd order from him so you know your getting the right parts for your car he knows whats up.
02type-s... So as for the sound difference all I can go on is how the xs and rt sound together. After the flex pipe got wrapped it sounds quite at idle, and at low rpm, and highway cruising. When you get on it, as everyone likes to say on here it kinda gets that g35 thing goin on. I love it, so do my friends, and girls seem to like it too which is important. Not to loud at all and thats what people describe the xs sounding like without the rt cat installed. So my guess it wont change sound much if any.![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
02type-s... So as for the sound difference all I can go on is how the xs and rt sound together. After the flex pipe got wrapped it sounds quite at idle, and at low rpm, and highway cruising. When you get on it, as everyone likes to say on here it kinda gets that g35 thing goin on. I love it, so do my friends, and girls seem to like it too which is important. Not to loud at all and thats what people describe the xs sounding like without the rt cat installed. So my guess it wont change sound much if any.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
I wrapped my flex pipe before install and it worked fine. i have a little raspiness to me exhaust now, but it is a little throatier, i guess G35-like. I feel that the slight raspiness is from my factory cat, however. I would like to straight-pipe it or do a high flow cat. People have told me the car runs better without a cat and even get better gas mileage without it and a good size exhaust, don't know how true it is.