theprez1980

Hey All -

I did a search and found some YouTube videos on the K24 but they were for Honda configurations... thought it may be best to confirm.... for a 2006 what are the valve lash specs? There's not a label under the hood and my vehicle didn't come with an owners manual. Could someone snap a pic of their valve lash sticker for a 1st Gen TSX so I can have it for my records?

A little background: I'm the 3rd owner, I've had the car for about 1.5 years.. it has 178,000 and within the past few months the valve train has become noisy..I'm assuming the valve lash check procedure has never been done.

Thanks

justnspace

iTrader: (1)

it's the same as the honda configurations..additionally the specs are on the underside of the hood

theprez1980

In my case, there's no sticker under the hood... guessing it was removed by the prior owners or fell off.

Anyone able to snap a pic of this sticker in their 1G TSX?

Thx

justnspace

iTrader: (1)

it's the same as the honda config...
you can google the sticker

justnspace

iTrader: (1)

here are the google results:



I've done a few valve adjustment videos in the past and I've been asked about doing one on the K series engine from Honda for some time. Since my 2004 Element was due for a valve adjustment I decided to make this video of the process.
Here's the additional information I mentioned in the video.

Honda recommends checking the valves at 110K intervals. The clearance specs are as follows.

Intake: .008-.010in .203-.254mm
Exhaust: .010-.013in .254-.330mm

Good luck and thanks for watching.